• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.514-519
• /
• 2000

Predicting a pressure drop between inlet and outlet of the filter system is essential in designing the optimum filter system. This experiment has been carried out to investigate several design parameters which influence in a pressure drop, such as different tube length and metal fiber filter mesh size. A 1/50 scale filter system was made to simulate a real filter system. Results are compared with Darcy equation for a porous media.

• 전기학회논문지
• /
• 제56권6호
• /
• pp.1117-1121
• /
• 2007

We demonstrate a wavelength swept mode-locked ring laser for the frequency domain optical coherence tomography(FD OCT). A laser is constructed by using a semiconductor optical amplifier, fiber Fabry-Perot tunable filter and 2.6 km fiber ring cavity. Mode-locking is implemented by 2.6 km fiber ring cavity for matching the fundamental or harmonic of cavity roundtrip time to a sweep period. The wavelength sweeps are repetitively generated with the repetition period of 77.2 kHz which is the parallel resonance frequency of Fabry-Perot tunable filter for the low driving current consumption of the fiber Fabry-Perot tunable filter. The wavelength tuning range of the laser is more than FWHM of 61 nm centered at the wavelength of 1320 nm and the linewidth of the source is $0.014{\pm}0.002$ nm.

• 한국입자에어로졸학회지
• /
• 제10권3호
• /
• pp.99-108
• /
• 2014

Liquid filtration by membrane filters is essential for the preparation of ultrapure water in semiconductor manufacturing processes. The separation of submicrometer particles suspended in ultrapure water with a laminated fibrous membrane filter was studied numerically and experimentally in the present work. We found that an electrical double layer around a single fiber expanded to a large extent at a low ion concentration, as in ultrapure water, and deformed toward the upstream of the fiber with increasing filtration velocity. Since an increase in the electrical double-layer thickness leads to a decrease in the electrical potential gradient, particles with the same polarity as the fiber approach the fiber more easily and are captured at a high filtration velocity. Experimental results also confirmed that the collection efficiency of polystyrene latex(PSL) particles through a PTFE filter became higher as the filtration velocity increased.

• Journal of the Optical Society of Korea
• /
• 제15권2호
• /
• pp.202-206
• /
• 2011

We propose a tunable flat-top bandpass filter to pass light in a customized wavelength band by using long-period fiber gratings (LPFG) structure. The LPFG structure is composed of a core mode blocker in between two LPFGs. The bandpass spectrum of the proposed structure is obtained in overlapped wavelength band of two LPFGs operating on the same modes. To analyze the properties, we introduce a mathematical matrix model for the structure. We theoretically demonstrate flexibility of the flat-top bandpass filter with various bandwidths.

• 한국연소학회지
• /
• 제10권4호
• /
• pp.10-17
• /
• 2005

Sustaining of flame stability of the burner installed in Dielsel exhaust pipe is very difficult because of steep fluctuation of pressure and flow rate. A burner for DPF (Diesel Particulate Filter) which clogged by collected soot regeneration has been made of metal fiber for the purpose of realization of flame stability even in unfavorable condition of Diesel engine exhaust. Flame stability of the metal fiber burner has been investigated in various condition of engine operation. It has been identified that metal fiber burner with liner which has swirl guide vane presents excellent flame stability even in the higher engine revolutions than 3000rpm and sudden variation. The results offer the possibility of development of full flow burner system for DPF regeneration.

• 한국포장학회지
• /
• 제26권1호
• /
• pp.33-39
• /
• 2020

본 연구에서는 닥섬유 함량에 따른 한지의 핸드드립용 커피필터로서의 적용가능성을 평가하기 위해 한지를 제조하고 실험을 실시하였다. 백색도 측정결과 목재펄프에 따른 기존 필터지와 한지간에 차이가 있었으며, 닥섬유 함량이 증가할수록 백색도가 감소하는 경향을 보였다. 닥섬유 함량이 증가할수록 닥섬유 내 장섬유에 의한 표면의 불균일성이 높아졌으며, 두께 값은 증가하고, 밀도는 감소하였다. 또한 닥섬유 함량이 증가할수록 인장강도와 습인장강도, 파열강도와 내절도는 모두 증가하였다. 특히 닥섬유 함량이 30%(w/w) 이상인 한지의 경우 기존 필터지보다 우수한 강도 값을 보여주었다. 화상분석장치를 이용한 한지필터 표면분석을 통하여 장섬유와 단섬유가 적절히 분포되어 공극을 메운 것을 확인할 수 있었다. 모든 한지필터는 식품용 기구 및 용기·포장재로서 적합 판정을 받았다. 닥섬유의 함량이 10%(w/w)인 한지 필터의 경우 기존 필터지보다 강도 값이 상대적으로 낮은 것으로 나타내어 커피 추출량 비교에서는 제외되었다. 동일한 드리퍼를 이용하여 같은 방법으로 추출한 커피의 추출수율은 유의적으로 차이가 없음을 확인하였다. 본 연구를 통해 닥섬유 함유량이 30%(w/w) 이상인 한지를 이용하여 커피를 추출했을 때, 시판 필터지와 유사한 강도와 추출속도를 가지는 것을 확인하였다. 추가적으로 한지필터를 이용하여 추출한 커피의 향미 평가를 통하여 닥섬유가 커피필터에 미치는 영향에 대한 연구가 필요할 것으로 보인다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.32-38
• /
• 2010

Hybrid material(ceramic+metal) processes were developed for micro filter using ceramics coating at metal filter surface by thermal spray method, micro hole drilling at ceramic coated filter surface by femtosecond laser, and fiber laser direct welding of ceramic and metal (SUS304, SM45C) by capillary effect. Thermal spray process was used for ceramic powders and metal filters. The used ceramic powders were $Al_2O_3+40TiO_2$(Metco 131VF) powder of maximum particle size $5{\mu}m$ and ${Al_2O_3}99+$(Metco 54NS) power of maximum particle size 45m. Ceramic coated filters using thermal spray method had a great influence on powder material, particle size and coating thickness but had a fine performance as a micro filter. CW fiber laser was used to drill the top ceramic layer and melt the bottom metal layer for joining applications.

• 전기전자학회논문지
• /
• 제14권4호
• /
• pp.263-269
• /
• 2010

본 논문에서는 Germanium 및 Germanium과 Boron이 도핑 된 광섬유의 FBG를 이용한 파장가변 형 전광 필터의 고온 특성을 고찰하고, 온도 변화에 대한 파장가변 형 FBG 필터의 반사도, 선폭, 정규화 굴절률 차의 특성 변화를 수치해석을 통해 비교 고찰 하였다. 굴절률 차의 변화에 따른 FBG 필터의 반사 스펙트럼은 온도 안정성에 영향을 받으며, Germanium이 도핑 된 광섬유의 FBG 필터가 Germanium과 Boron이 도핑 된 광섬유의 FBG 필터보다 온도변화에 더 안정성을 가짐을 알 수 있다. 또한 $500^{\circ}C$ 까지의 온도에 대해서는 두 가지 모두 필터로서 온도변화에 안정성을 가짐을 알 수 있다.

• Current Optics and Photonics
• /
• 제4권6호
• /
• pp.472-476
• /
• 2020

We have investigated the impact of optical filter bandwidth on the performance of all-optical automatic gain-controlled (AGC) erbium-doped fiber amplifiers (EDFAs). In principle, an optical bandpass filter (OBPF) should be placed within the feedback gain-clamping loop to set the lasing wavelength as well as the passband of the feedback amplified spontaneous emission (ASE) in all-optical AGC EDFA. From our measurement results, we found that the power level of feedback ASE with 0.1 nm passband of the optical filter was smaller than the ones with >0.2 nm passband cases. Therefore, the peak-to-peak power variation of the surviving channel with 0.1 nm passband was much larger than the ones with >0.2 nm passband. In addition, no significant difference in the power level of the feedback ASE was observed when the passband of the optical filter was ranging from 0.2 nm to 4.5 nm in our measurements. From these results, we have concluded that the passband of the optical filter should be slightly larger than 0.2 nm by taking into account the effect of feedback ASE power and the efficient use of the EDFA gain spectrum for the lasing ASE peak.

• 한국입자에어로졸학회지
• /
• 제15권1호
• /
• pp.15-25
• /
• 2019

The influences of corona charging parameters on collection efficiency and surface potential of air filters were investigated. A polypropylene filter medium was electrically charged using a corona charger, and the resulting surface potential and filtration efficiency against neutralized KCl particles were measured. The filter media was charged under different conditions of applied voltage, voltage polarity, charging time, and distance between electrodes. In addition, we considered charging both sides of the filter as well as charging one side of the filter. As a result, electrical force obtained by charged fiber affected filtration efficiency when the apply voltage strength was higher than 7 kV. Negatively charged filter had higher filtration efficiency than positively charged filter while the surface potential of the negatively charged filter was slightly lower than those of positively charged filter. Moreover, the filtration efficiency increased as the charging time of filter fiber increased and the distance between electrodes decreased. The filtration efficiency was more sensitive to changes of charging time than to those of electrode distance, and the efficiency of both sides charged filter was higher than that of single side charged filter.