• Geomechanics and Engineering
• /
• v.20 no.5
• /
• pp.399-410
• /
• 2020

Cavities often develop behind the vault during the construction of double-arch tunnels, generally in the form of various defects. The study evaluates the impact of cavities behind the vault on the mechanical and failure behaviors of double-arch tunnels. Cavities of the same sizes are introduced at the vault and the shoulder close to the central wall of double-arch tunnels. Physical model tests are performed to investigate the liner stress variation, the earth pressure distribution and the process of progressive failure. Results reveal that the presence of cavities behind the liner causes the re-distribution of the earth pressure and induces stress concentration near the boundaries of cavities, which results in the bending moments in the liner inside the cavity to reverse sign from compression to tension. The liner near the invert becomes the weak region and stress concentration points are created in the outer fiber of the liner at the bottom of the sidewall and central wall. It is suggested that grouting into the foundation soils and backfilling injection should be carried out to ensure the tunnel safety. Changes in the location of cavities significantly impact the failure pattern of the liner close to the vault, e.g., cracks appear in the outer fiber of the liner inside the cavity when a cavity is located at the shoulder close to the central wall, which is different from the case that the cavity locates at the vault, whereas changes in the location of cavities have a little influence on the liner at the bottom of the double-arch tunnels.

• Journal of Sasang Constitutional Medicine
• /
• v.14 no.3
• /
• pp.97-113
• /
• 2002

Objective To study the effectiveness of Yuldahansotang against Allergic Contact Dermatitis, the change of cutaneous shape, histochemistry, immunohistochemistry and distribution of apoptotic cells was researched. materials and methods 4-month-old rats were divided into three groups of 10. One is a contrastive group which has applied Acetone olive oil only. Another is ACD group which has intentionally activated Allergic Contact Dermatitis by DNCB. And the other is YST group which has given medication of Yangkyuksanhawtang extract. Each group of mice were observed after 24, 48 and 72 hours. results 1. With the result of Contact hypersensitivity assay, YST group shows appreciably less ear swelling than ACD group. 2. Comparing YST and ACD groups to each other regarding general change of skin, YST group shows less hyperplasia of epidermis, less migration of inflammatory cells and less damage of epidermis than ACD group. 3. Regarding the change of collagen fiber, ACD group has appeared to be low in number of collagen fiber while YST shows similarity with the contrastive group. 4. In dermis YST group has showed lower number of mastocyte than ACD group and is granulated type. 5. In dermis YST group has showed less MAC-1,IL-1, $IL-2R-{\alpha}$, ICAM-1 and VCAM-1 than ACD group. 6. The distribution of apoptotic cells has appeared littler in YST group than in ACD 7. Among signal molecule of apoptosis Bcl-2 has distributed more in YST group than ACD group and Bax and Fas has distributed less in YST group than ACD group.

• Composites Research
• /
• v.22 no.6
• /
• pp.23-31
• /
• 2009

This paper investigated acoustic emission (AE) characteristics in association with various fracture processes of glass fiber reinforced plastic skin/ aluminum honeycomb core (GF-AH) hybrid composites under compressive and bending loads. Various failure modes such as skin layer fracture, skin/core interfacial fracture, and local plastic yield buckling and cell wall adhesive fracture occurring in the honeycomb cell wall were classified through the fracture identification in association with the AE frequency and amplitude analysis. The distribution of the event-rate in which it has a high amplitude showed a procedure of cell wall adhesive fracture, skin/core interfacial debonding and fiber breakage, whereas distribution of different peak frequencies indicated the plastic deformation of aluminum cell wall and the friction between honeycomb walls. Consequently, the fracture behaviors of GF-AH hybrid composites could be characterized through a nondestructive evaluation employing the AE technique.

• Applied Biological Chemistry
• /
• v.46 no.2
• /
• pp.123-129
• /
• 2003

This study is to investigate consequent nutrient intake status, Influences of body mass index (BMI) and serum lipid composition, and fat distribution on the cocoon hydrolysate, green tea leaves and dietary fiber supplementation. During 2 months of this research (April to May, 2002), 47 women aged 20 yr-30 yr (average age 26.2 yr) were selected as subjects. Nutrient intake was investigated by questionnaire and 24-hr recall method. Antropometric assessments of the subjects were investigated by SBIA method (Segmental bioimpedance assay, Inbody 3.0). The results were as follows: mean body weight was 60.7 kg, mean body height 161.7 cm and mean BMI 23.4. Status of energy intakes significantly decreased (p<0.01) and dietary fiber intakes significantly increased (p<0.001) after supplementation. BMI and WHR (waist-hip ratio) significantly decreased (p<0.01) and body fat significantly decreased after supplementation (p<0.001). Total cholesterol and LDL-cholesterol significantly decreased after supplementation (p<0.05). HDL-cholesterol was negatively correlated with BMI and WHR (p<0.01). LDL/HDL ratio was positively correlated with BMI (p<0.01) and WHR (p<0.05). Above results of this study show that low-molecule peptide, green tea leaves and dietary fiber supplementation-added routine diet improves lessening body fat distribution, total cholesterol, LDL-cholesterol. Especially, decrease of abdominal fat and WHR were notable. That meant decrease of risk factors.

• Restorative Dentistry and Endodontics
• /
• v.34 no.1
• /
• pp.69-79
• /
• 2009

The purpose of this study was to evaluate the influence of elastic modulus of restorative materials and the number of interfaces of post and core systems on the stress distribution of three differently restored endodontically treated maxillary second premolars using 3D FE analysis. Model 1, 2 was restored with a stainless steel or glass fiber post and direct composite resin. A PFG or a sintered alumina crown was considered. Model 3 was restored by EndoCrown. An oblique 500 N was applied on the buccal (Load A) and palatal (Load B) cusp. The von Mises stresses in the coronal and root structure of each model were analyzed using ANSYS. The elastic modulus of the definitive restorations rather than the type of post and core system was the primary factor that influenced the stress distribution of endodontically treated maxillary premolars. The stress concentration at the coronal structure could be lowered through the use of definitive restoration of high elastic modulus. The stress concentration at the root structure could be lowered through the use of definitive restoration of low elastic modulus.

• Korean Journal of Veterinary Research
• /
• v.6 no.1
• /
• pp.82-91
• /
• 1966

Studies On the myelinated fibers of the recurrent laryneal nerves were made in five, species of domestic animals namely dog, pig, goat, horse and Korean ox. Throughout the studies, the following characteristics of the myelinated fibers were obtained. 1. The number, size and cross sectional area of the myelinated fibers seemed to be proportionally related to the animal body weights. 2. The highest peak of diameter size frequency distribution of the myelinated fibers, observed at the right cranial level, in dog, goat and horse were 4-6 micron group, while in the case of Korean ox, 10-12 micron group was the highest. 3. The highest peak of diameter size frequency distribution of the myelinated fibers, observed at the right caudal level of Korean ox was 6-8 micron group, and 4-6 micron group was the highest in the other animals. 4. The highest peak of diameter size frequency distribution of the myelinated fibers obsered at the left cranial level was same to that of right cranial level. 5. The highest peak of diameter size frequency distribution of the myelinated fibers, observed at the left caudal levels in dog, goat, horse and Korean ox was 4-6 micron group, while in case of pig, $14-16{\mu}$ group was the highest. 6. The largest cross sectional areas were found in the group of 10-16 micron in all species of animals. 7. The fiber diameter size frequency distribution of recurrent laryngeal nerves of dog, goat, pig and horse were bimodal and Korean ox seemed to be a unimodal.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.85-90
• /
• 2006

Increasing the filler content of sheet improves the optical properties and printability of paper and provides an opportunity for saving production cost through fiber replacement with relatively low-priced filler. But increasing the filler content tends to decrease the strength of paper and filler retention. It also tends to deteriorate drainage on the paper machine. To overcome these problems, preflocculation technology of fillers may be employed. Many research efforts have been made on the properties of preflocculated filler, namely prefloc, whose size and size distribution were influenced by polymer type and shear level. But there is much to be investigated about the effect of the prefloc characteristics on the physical properties of paper. To evaluate the effect cationic polymers on the size and size distribution of preflocculated GCC and their shear stability, cationic PAM and cationic starch were used. The influence of the preflocculation on filler retention and its surface distribution, and the changes of physical and optical properties of handsheets affected by the characteristics of preflocs were examined. Filler distribution on sheet surface was also analyzed by EPMA. Results showed that cationic PAM formed large preflocs at low dosage. Cationic starch was required to add 15 times as much as cationic PAM to obtain the preflocs with similar size. But preflocs formed with cationic starch was superior in shear stability to those formed with cationic PAM. Filler preflocculation technology could provide an opportunity of increasing filler content significantly without loss in tensile strength. And increased filler contents could compensate brightness loss which often accompanies filler preflocculation. When excessively large preflocs were used, however, brightness loss rather than the improvement in tensile strength was predominant. Therefore it is of great importance to produce preflocs with proper size and shear stability for maximizing the improvement of physical properties of papers.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.45-50
• /
• 2007

We present a auto compensating quantum key distribution system based on optical fiber at 1550nm. In the quantum key transmission system, main control board and phase modulation driving board are fabricated for auto controlling quantum key distribution(QKD). We tested the single photon counts per dark counts for a single photon detector, quantum key distribution rate($R_{sift}$) and the quantum bit error rate (QBER). Quantum bit error rate of 3.5% in 25km QKD is obtained. This system is commercially available.

• Journal of information and communication convergence engineering
• /
• v.5 no.2
• /
• pp.164-170
• /
• 2007

In this paper, the new method alternating with the method for forming the symmetrical distribution of power and local dispersion in high bit-rate WDM system with optical phase conjugator (OPC) is proposed. The proposed method is carried by finding out the optimal values of OPC position offset and fiber dispersion offset. It is assumed to be that NRZ-formatted 24-channels of 40 Gbps are simultaneously propagated in WDM system with non zero - dispersion shifted fiber (NZ-DSF) of 1,000 km. It is confirmed that the compensation extents of overall WDM channels are more improved by applying the induced optimal values into WDM system than those in WDM system with the conventional mid-span spectral inversion (MSSI) technique, and the searching procedure of the optimal values makes little difference of performance if the optimal value of one parameter related with another parameter. And, it is confirmed that the flexible design of WDM system with OPC is possible by effectiviely using by these optimal values. Thus, it is expected that the proposed method alternate with the forming method of the symmetrical distributions of power and local dispersion.

• Computers and Concrete
• /
• v.17 no.3
• /
• pp.353-386
• /
• 2016

Realistic assessment of the performance of reinforced concrete structural members like columns is needed for designing new structures or maintenance of the existing structural members. This assessment requires analytical capability of employing proper material models and cyclic rules and considering various load and displacement patterns. A computer application was developed to analyze the non-linear, cyclic flexural performance of reinforced concrete structural members under various types of loading paths including non-sequential variations in axial load and bi-axial cyclic load or displacement. Different monotonic material models as well as hysteresis rules, were implemented in a fiber-based moment-curvature and in turn force-deflection analysis, using proper assumptions on curvature distribution along the member, as in plastic-hinge models. Performance of the program was verified against analytical results by others, and accuracy of the analytical process and the implemented models were evaluated in comparison to the experimental results. The computer application can be used to predict the response of a member with an arbitrary cross section and various type of lateral and longitudinal reinforcement under different combinations of loading patterns in axial and bi-axial directions. On the other hand, the application can be used to examine analytical models and methods using proper experimental data.