• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.7
• /
• pp.1180-1190
• /
• 2020

Objective: To develop healthier comminuted meat products to meet consumer demand, the gel properties, rheological properties, microstructure and water distribution of pork meat batters formulated with various amounts of bamboo shoot dietary fiber (BSDF) were investigated. Methods: Different levels of BSDF (0% to 4%) were added to pork batters, and the pH, color, water-holding capacity, texture and rheological properties of pork batters were determined. Then, pork batters were analyzed for their microstructure and water distribution using scanning electron microscopy (SEM) and low-field nuclear magnetic resonance (LF-NMR). Results: Compared with the control, BSDF addition into meat batters showed a significant reduction in L^*-value and a significant increase in b^*-value (p<0.05). BSDF addition of up to 4% reduced the pH value of pork batters by approximately 0.15 units; however, the cooking loss and expressible water loss decreased significantly (p<0.05) with the increased addition of BSDF. The hardness and gel strength were noticeably enhanced (p<0.05) as the content of BSDF increased. The rheological results showed that BSDF added into pork batters produced higher storage modulus (G') and loss modulus (G") values. The SEM images suggested that the addition of BSDF could promote pork batters to form a more uniform and compact microstructure. The proportion of immobilized water increased significantly (p<0.05), while the population of free water was decreased (p<0.05), indicating that BSDF improved the water-holding capability of pork batters by decreasing the fraction of free water. Conclusion: BSDF could improve the gel properties, rheological properties and water distribution of pork meat batters and decrease the proportion of free water, suggesting that BSDF has great potential as an effective binder in comminuted meat products.

• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.358-366
• /
• 2006

Thermotropic liquid crystal polymer (TLCP)-reinforced poly(butylene terephthalate) (PBT) composites were prepared by melt processing. The improvement in the mechanical properties and the processability of the PBT/TLCP composites was attributed to the reinforcing effect by TLCP phase and its well distribution in the PBT matrix. X-ray diffraction results demonstrated that a slow cooling process leads to the thicker lamellar structures and the formation of more regular crystallites in the composites. The incorporation of TLCP improves not only the tensile strength and flexural modulus but also the heat distortion temperature (HDT) of the PBT/TLCP composites. The HDT values of the composites were dependent on TLCP content. The improvement in the HDT values of the PBT/TLCP composites may be explained in terms with the increased flexural modulus, the development of more regular crystalline structures, and the enhancement of the ability of the composites to sustain the storage modulus by TLCP phase. In addition, the simple additivity rule makes it possible to predict the HDT values of the PBT/TLCP composites.

• Journal of Ginseng Research
• /
• v.22 no.4
• /
• pp.289-293
• /
• 1998

Six-year-old ginseng roots were divided into rhizome, main root (epidermis, cortex and xylem) and lateral root (big tail root, mid tail root and fine tail root) and the concentration levels of soluble dietary fiber (SDF) and insoluble dietary fiber (IDF) in each part of the ginseng were investigated. The amount ratios of SDF to IDF (SDF/IDF) in various parts of the ginseng root were also compared. The concentration levels of SDF and IDF in the ginseng root were 6.56% and 15.41 %, respectively, where the level of SDF in main root was a little higher than that of lateral root. However the amount of IDF in main root was lower than that of lateral root. The SDF/IDF was highest in main root, 0.513, which was higher than that of lateral root or rhizome. The SDF/IDF was 0.704 in xylem, 0.478 in cortex, and 0.099 in epidermis of the main root and the SDF/IDF was 0.576 in big tail root, 0.463 in mid tail root, and 0.255 in fine tail root of the lateral root. It has been reported that SDF might have preventive effects on diabetes, obesity, high blood pressure, colon and rectum cancers, while IDF might have preventive effects on constipation. Therefore, main root of six-year- old ginseng root is thought to have a little different physiological activity from lateral or fine tail roots.

• Journal of Sericultural and Entomological Science
• /
• v.39 no.2
• /
• pp.169-173
• /
• 1997

The behavior of tyrosine(Tyr.) residue of Bombyx mori silk fiber from yellow fluorescent cocoon has been examined for the dependence of pH in aqueous silk solution under the presence of orange II salt. Through the peak separation of angular dependence of spectral pattern of 15N-Tyr. and [1-13C]-Tyr. between the fiber axis and the molecular bond direction, N-H bond in fiber as well as the orientation distribution around the fiber axis were analyzed. Also, and sericin component was obtained from these angular dependence of oriented spectral pattern. The pH dependence of the 13C NMR chemical shift of B. mori silk fibroin was examined in aqueous solution in the presince of orange II are broad at pH$\geq$7.0. However, these become sharper at pH$\geq$8.0 and remain sharp at higher pH. In these higher pH range, a chemical shift change occurs due to the deprotonation of the Tyr. side group of fibroin. At higher pH. such a hydrophobic cluster is destroyed because of the electrostatic interaction according to the deprotonation of the Tyr-OH group.

• Journal of the Korean Society of Tobacco Science
• /
• v.26 no.1
• /
• pp.57-63
• /
• 2004

A comparative analysis of characteristics of domestic and foreign reconstituted tobacco based on papermaking was conducted to evaluate the quality of reconstituted tobacco and to utilize as basic data for improvement of domestic reconstituted tobacco. In the formation, which is key factor to quality and physical properties of product, foreign reconstituted tobacco has better uniform formation than those of domestic one. These result was attributed to distribution of large floc size in the domestic one unevenly. In the fiber morphology, domestic reconstituted tobacco has larger average fiber length and width than those of foreign one. They indicated that fiber morphology of domestic one will exert structural properties of paper such as formation and permeability. Tensile strength of domestic one has lower than those of foreign one by basis weight. In the air permeability, domestic one was remarkably reduced because base web was over sized. It also will affect the combustibility of reconstituted tobacco. In summary, we conclude that the physical and structural properties of domestic reconstituted tobacco result in quality deviations compared with foreign reconstituted tobacco.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.440-449
• /
• 2003

Residual strength of fiber metal laminates after impact was studied. 3/4 lay up FML was fabricated using 4 ply prepreg, 2 ply aluminum sheets, and 1 ply steel sheet. Quasi isotropic ([0/45/90/-45]s) and orthotropic ([0/90/0/90]s) FRP were also fabricated to compare with FML. Impact test were conducted by using instrumented drop weight impact machine (Dynatup, Model 8250). Penetration load and absorbed energy of FML were superior to those of FRPs. Tensile tests were conducted to evaluate the residual strength after impact. Strength degradation of FML was less than that of FRP. This means that the damage tolerance of FML is excellent than that of FRP. Residual strength of each specimen was predicted by using Whitney and Nuismer(WN) Model. Impact damage area is assumed as a circular notch in WN model. Damage width is defined as the average of back face and top face damage width of each specimen. Average stress and point stress criterions were used to calculate the characteristic length. It is supposing that a characteristic length is a constant. The distribution of characteristic length shows that the assumption is reasonable. Prediction was well matched with experiment under both stress criterions.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.1
• /
• pp.105-114
• /
• 1989

This study was carried out to measure the mechanical properties and the acoustic emission (AE) characteristics of the carbon fiber reinforced composites of several types of the stacking sequence. AE signals were detected during the tensile tests. The number of ringdown counts, total ringdown counts were plotted together with the load-displacement curves. The tensile load-displacement behavior of specimen is compared and discussed based on the measured AE properties in relation to the failure mechanism. With the increase of load, AE signals increased. This showed that failure had being propagated by matrix deformation and cracking, delamination, fiber debonding and breakage. Felicity ratio has been obtained by observation of ;the Kaiser effect according to the variation of load ratio. The reloading tests showed that the felicity ratio decreased obviously when the load ratio or damage increased. These AE characteristics are hopeful to be employed as the criteria to evaluate the failure processes of composites.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.11a
• /
• pp.89-96
• /
• 2006

To estimate the manufacturing district and generation of ancient paper as a cultural property, fiber orientation is one of the criteria. Image analysis using fast Fourier transform with suitable modifications was demonstrated to be an effective means to determine angle and intensity of fiber orientation as a nondestructive method. Binarization process of microscopic images of paper surface and precise calculation for average Fourier coefficients as an angular distribution by linear interpolation were newly introduced in the procedures to improve the accuracy. This analysis method was applied to digital optical micrographs of paper surfaces. Korea and Japanese traditional hand making papers were well distinguished. Korea and Japanese papers made in the traditional ways showed its own characteristic orientation behavior in accordance with the motion of a bamboo wire.

• Nuclear Engineering and Technology
• /
• v.47 no.5
• /
• pp.617-623
• /
• 2015

$ZrO_2$-based composites reinforced with 6.5 vol.% of carbon foam, carbon fiber, and graphite were fabricated using spark plasma sintering, and characterized using scanning electron microscopy and X-ray diffractometry. Their thermal properties were also investigated. The microstructures of the reinforced composites showed that carbon fiber fully reacted with $ZrO_2$, whereas carbon foam and graphite did not. The carbothermal reaction of carbon fiber had a negative effect on the thermal properties of the reinforced $ZrO_2$ composites because of the formation of zirconium oxycarbide. Meanwhile, the addition of carbon foam had a positive effect, increasing the thermal conductivity from 2.86 to $3.38Wm^{-1}K^{-1}$ at $1,100^{\circ}C$. These findings suggest that the homogenous distribution and chemical stability of reinforcement material affect the thermal properties of $ZrO_2$-based composites.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.964-966
• /
• 2015

The effect of the deviations of single mode fiber lengths and residual dispersion per span (RDPS) on the compensation for the distorted WDM signals in the dispersion-managed optical links with the specially artificial distributions of the lengths of SMFs and RDPSs. The considered artificial distribution is following; the lengths of SMF and RDPSs between the adjacent fiber span are more descended in the half transmission section from transmitter to optical phase conjugator (OPC), and those are more ascended in the rest half transmission section from OPC to the receiver, as number of fiber spans are more increased.