• Asian Journal of Business Environment
• /
• v.14 no.1
• /
• pp.15-22
• /
• 2024

Purpose: The development of natural batik dyes based on a combination of coconut fiber waste and avocado leaves using the extraction method is important to support the green economy and reduce chemical waste in Indonesia. Research design, data and methodology: The research explores the use of coconut fiber and avocado leaf waste extraction as a natural batik dye and conducts market testing to assess consumer satisfaction. Results: Indonesian batik exports are growing, but synthetic dye practices are causing a decline in demand. To address this, natural dyes are being explored, including coconut fiber waste and avocado leaf waste. Conclusion: Test results from washing at 40 degrees Celsius in terms of color changes and color staining, from sweat in terms of changes in acid color and changes in base color, to sunlight in terms of color fastness value, to heat to iron in terms of color change and color staining shows a value of 3-4 (quite good) and 4-5 (good), meaning that coconut fiber and avocado leaves waste can be used as natural batik dye.

• Journal of the Optical Society of Korea
• /
• v.18 no.6
• /
• pp.650-656
• /
• 2014

We propose a novel active fiber design for selectively generating cylindrical vector beams (CVBs) or cylindrical vector modes (CVMs) which can be applied to conventional fiber lasers. A fiber is designed to have a ring-shaped core refractive index profile which can lead to the best overlap between the active dopant distribution profile and the lowest-order CVM (LCVM) field profile. Therefore, the overlap factor (OVF) of the LCVM becomes even higher than that of the fundamental mode. We emphasize that this condition cannot be satisfied by a conventional step-index core fiber (SICF) but by the ring-doped core fiber (RDCF). Because the lasing threshold is inversely proportional to the OVF, the LCVM can predominantly be stimulated even without going through special procedures to impose extra loss mechanisms to the fundamental mode. We numerically verify that the OVF of the LCVM with the doped ions can significantly exceed that of the fundamental mode if the proposed fiber design is applied. In addition, an RDCF of the proposed fiber design can also operate in a regime containing no higher-order modes besides the LCVM, so that it can selectively and efficiently generate the LCVM without being disrupted by the parasitic lasing of the higher-order modes. We highlight that an optimized RDCF can lead to a >30 % higher OVF ratio than a SICF having the same doped area. The proposed model is expected to be useful for enhancing the efficiency of generating CVBs in an all-fiber format.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.5 no.1
• /
• pp.33-38
• /
• 1978

It has been studied that aminoacetonitrile was associated with the inhibition of collagen fiber, argyrophilic fiber and oxytalan fiber synthesis. This experiment was performed, by the basic knowledge of above mentioned study, to study on the biological effect of aminoacetonitrile to the developing periodontal ligament in Sprague Dawley rat. twenty two of female rats weighing about 200gm were gestated. In 7 days after gestation, the experimental rats were injected aminoacetonitrile 7 times intraperitoneally. After parturition, delivered fJtuses were divided into 4 groups and each group was sacrificed to 1 day, 7 days, 14 days, and 21 days after delivery, schematically. All the fetuses were observed on their periodontal ligament by histological and histo chemical methods. To study on the components of periodontal ligament fiber in these experimental study van Gieson, Masson's trichrom, argyrophilic fiber, oxytalan fiber, methyl green pyronin and periodic acid-Shiff staining were performed. Results were as follows; 1) Retardation of functional orientation in periodontal ligament collagen fiber was observed in 1 day fetuses hut this appearance was diminished gradually and recovered in normal condition in 7 days fetuses. 2) Distribution of argyrophilic fiber in 1 day fetuses was oriented delicately and loosely but volume of this fiber was gradually thickened and distributed densely. 3) Oxytalan fiber was oriented dendritic ally and contradictorily in 14 days fetuses but their orientation was changed into oblique form in middle portion of roof and their numbers were increased gradually. 4) Pyronin-philic stain of fibroblast was gradually deepened in 7 days fetuses and this finding also suggested to the depreciation of collagen synthesis in this specimen. 5) PAS positive line was observed continuousely at the portion of cervical to the middle root surface.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.3
• /
• pp.612-619
• /
• 2012

This study was conducted to investigate the physicochemical properties of the ethanol extracts and soluble dietary fiber from Cassia tora L. seed. The proximate composition of Cassia tora, soluble solid contents, color intensity and contents of emodin and rhein of Cassia tora extract, molecular mass distribution, sugar contents and viscosity of soluble fiber from Cassia tora were analyzed. Cassia tora contains 12.6% of moisture, 5.2% of ash, 13.4% of crude protein, 7.2% of crude fat, 8.8% of insoluble fiber and 48.3% of soluble fiber. The effects of extract condition on soluble solid contents, color intensity and contents of emodin and rhein of Cassia tora extract were investigated. The soluble solid contents were higher in 70% or 50% ethanol extracts than those in 100% ethanol extracts and showed highest value in grind sample extracts. In Hunter's color value, 100% ethanol extracts and whole Cassia tora sample extracts were higher in L and b value, but on the contrary, were lower in a value, than those of the other. The highest emodin and rhein contents were observed in 70% and 50% ethanol extracts, respectively, and showed higher value in room temperature extracts than in heating extracts. The molecular mass of soluble fiber from Cassia tora seed was estimated by gel filtration chromatography. Most soluble fiber(80%) exhibited a molecular mass range of between 50~2000 kDa. The major sugars of soluble fiber from Cassia tora seed were identified as xylose, mannose and galactose. The apparent viscosity of 0.5% soluble fiber from Cassia tora seed was 33 mPas showing a higher value than pectin or xanthan gum.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.157-163
• /
• 2018

This study is aimed at controlling the fiber orientation and improve the fiber distribution in fiber-reinforced cement composites using blades that can be placed inside the existing nozzles. To optimize the blade parameters, multi-physics finite element analysis was performed that could account for the flow of the cementitious matrix material, the movement of the entrained fibers, and the interactions with the nozzle. As a result, this study defined the blade distance, length, and position as a function of the fiber length to be used in the field. The blades with a distance from 1.2 to 2.4 times the fiber length and length from 4 to 8 times the fiber length, as well as located at below 14 times the fzfiber length from the nozzle exit maintained the fiber orientation angle less than $5^{\circ}$. In addition, the blade-type nozzle proposed in the study can be attachable and detachable to the conventional casting equipment, and thus it can provide the usability and convenience in practical applications.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.2
• /
• pp.511-519
• /
• 1996

An investigation was conducted to study the statistical nature of tensile strength and static fracture toughness of carbon fiber reinforced plastics(CFRP) materials. A good understanding of statistical aspects of strength data is essential for the successful application of such materials because these composites unpossess material uniformity as compared with conventional metallic materials. In this paper, a statistical approach based on Weibull distribution was applied to the test data to evaluate the dispersion in the tensile strength and static fracture toughness by the change of stacking method and test temparature of the CFRP materials.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.625-626
• /
• 2015

The optimal distribution pattern for the compensation for the distorted WDM signals due to the group velocity dispersion (GVD) and the nonlinear Kerr effects is induced in $80km{\times}50spans$ optical link with an artificial distributions of single mode fiber (SMF) lengths and residual dispersion per span (RDPS).

• Textile Coloration and Finishing
• /
• v.20 no.4
• /
• pp.21-30
• /
• 2008

To understand the complex hydrogen bonding structure, several phenolic derivatives and benzoxazine model compounds are synthesized and characterized by Fourier transform infrared spectroscopy (FT-IR). The estimation of molar extinction coefficients for various types of hydrogen bonding species is systematically carried out by the curve-resolving of FT-IR spectra. The distribution of hydrogen bonding species in benzoxazine model dimers is quantitatively analyzed. It is revealed that benzoxazine dimers and BA-a polybenzoxazine are mainly composed of intramolecular interaction rather than intermolecular interaction.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.101-102
• /
• 2003

선형점탄성에서 완화시간분포를 알면 완화탄성율, 동적 점탄성율 등 다양한 정보를 알 수 있기 때문에 중요한 정보이지만 실험으로 직접 측정되는 물리량이 아니며 완화탄성율이나 동적 점탄성율의 실험 결과로부터 얻는 것도 많은 수학적인 어려움이 있다. 최근에 Regularization을 이용한 방법으로 연속함수로써 완화시간분포를 계산하는 방법들이 개발되어진 바 있다. 동적점탄성율 실험결과로부터 완화시간분포를 연속함수로써 계산할 수 있는 간단한 수치해법을 연구하였다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.56-59
• /
• 2003

열가소성 폴리우레탄 탄성체는 유리전이온도가 낮은 soft segment와 융점이 높은 hard segment로 이루어진 블록공중합체이다. 이들 두 블록은 서로 상분리가 일어남으로써 각각 의 domain을 형성하며, 그 결과 hard segment는 가교의 역할을 행함으로써 우수한 탄성을 발휘할 수 있다. 이의 물성은 hard segment 및 soft segment의 조성과 화학구조 및 이들의 상분리 정도에 따라 다양하게 되며 또한 이의 전이온도도 다르게 변화시킬 수 있다. (중략)