• Title/Summary/Keyword: Fiber diameter

Search Result 800, Processing Time 0.027 seconds

Studies on Wood Quality and Growth of Alnus glutinosa in Korea - Anatomical Properties - (글루티노사오리나무의 생장과 재질 - 해부학적 성질 -)

  • Kim, Min-Ji;Kim, Byung-Ro
    • Journal of the Korean Wood Science and Technology
    • /
    • v.44 no.3
    • /
    • pp.295-301
    • /
    • 2016
  • In this study, relationship between seed origin and growth rate of Alnus glutinosa from different seed collection (Yugoslovia, ltaly, United Kingdom, Bulgaria) was investigated with focused on anatomical properties as wood fiber length, vessel element length and diameter. Alnus glutinosa showed diffuse-porous wood with scalariform perforation in alternate pitting. Ray height was 9~11 in tangential section and ray number were 16~26 in cross section. There were no differences on latewood focused on wood fiber length, length and diameter of vessel element, but difference on earlywood. Other than Yugoslavian seed, there was better growth rate with shorter wood fiber and vessel element length on latewood. However, seed from Yugoslovain showed better growth rate with longer wood fiber and vessel element length than other 3 seed orgins.

Simulation of the Structural Parameters of Anti-resonant Hollow-core Photonic Crystal Fibers

  • Li, Qing;Feng, Yujun;Sun, Yinhong;Chang, Zhe;Wang, Yanshan;Peng, Wanjing;Ma, Yi;Tang, Chun
    • Current Optics and Photonics
    • /
    • v.6 no.2
    • /
    • pp.143-150
    • /
    • 2022
  • Anti-resonant hollow-core photonic crystal fiber (AR-HCF) has unique advantages, such as low nonlinearity and high damage threshold, which make it a promising candidate for high-power laser delivery at distances of tens of meters. However, due to the special structure, optical properties such as mode-field profile and bending loss of hollow-core fibers are different from those of solid-core fibers. These differences have limited the widespread use of AR-HCF in practice. In this paper we conduct numerical analysis of AR-HCFs with different structural parameters, to analyze their influences on an AR-HCF's optical properties. The simulation results show that with a 23-㎛ air-core diameter, the fundamental mode profile of an AR-HCF can well match that of the widely used Nufern's 20/400 fiber, for nearly-single-mode power delivery applications. Moreover, with the ratio of cladding capillary diameter to air-core diameter ranging from 0.6 to 0.7, the AR-HCF shows excellent optical characteristics, including low bending sensitivity while maintaining single-mode transmission at the same time. We believe these results lay the foundation for the application of AR-HCFs in the power delivery of high power fiber laser systems.

Behavior of Concrete Confined with GFRP According to the Fiber Volume, Diameter and Length (복합소재 부재에서 섬유의 양과 시편의 크기에 따른 콘크리트 구속모델)

  • Lee, Myung;Lee, Sung-Woo;Choi, Seok-Hwan;Jung, Kyu-Sang;Lee, Young-Ki
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 2004.04a
    • /
    • pp.471-478
    • /
    • 2004
  • The behavior of stocky concrete-filled glass fiber reinforced polymer(GFRP) tubes was studied experimentally and analytically The behavior is focused on the confining action of GRFP tube against concrete. In the experimental work, extensive tensile tests for GFRP tubes which have various fiber lay-out were conducted. And, also short length concrete filled GFRP tubes which have various tube thickness, diameter, and length were tested. In the analytical work, equations to describe the compressive stresses and strains at failure, as well as the entire stress-strain curve of the GFRP tubes were developed. A comparison between the experimental results and those of analytical results indicate that the proposed model provides satisfactory predictions for the compressive strengths, strains at failure, and stress-strain responses.

  • PDF

Development of Precision Vision Inspection System for Micro Optical Parts using a New Optical Probe Implemented to have Multiple Fields of Views (다중광학창을 가진 광학소자 자동 검사 시스템 개발)

  • 이일환;이기수;박희재
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2001.04a
    • /
    • pp.105-109
    • /
    • 2001
  • The micro optical parts such as ferrules are required to be manufactured within very small tolerances, as the slight deviation of the tolerance would give very large amount of loss in communication efficiency. For efficient optical communication, outer diameter, fiber diameter, fiber separation and eccentricity are significant parameters to be inspected., Thus we developed an automatic inspection system to evaluate shape parameters of the optical fiber connectors(ferrule) upto submicron accuracy using machine vision. new optical probe of multi fields of views has been developed and the image processing and data analysis algorithms have been complemented in real time basis. The developed system is successfully used in the practical ferrule manufacturing industry, and about 0.1$\mu\textrm{m}$ accuracy can be obtained with very fast inspection time.

  • PDF

A Study on Electrical Resistivity Behaviors of PAN-based Carbon Nanofiber Webs

  • Park, Soo-Jin;Im, Se-Hyuk;Rhee, John-M.;Lee, Young-Seak
    • Carbon letters
    • /
    • v.8 no.1
    • /
    • pp.43-48
    • /
    • 2007
  • The influences of various carbonization temperatures on electrical resistivity and morphologies of polyacrylonitrile (PAN)-based nanofiber webs were studied. The diameter size distribution and morphologies of the nanofiber webs were observed by a scanning electron microscope. The electrical resistivity behaviors of the webs were evaluated by a volume resistivity tester. From the results, the volume resistivity of the carbon webs was ranged from $5.1{\times}10^{-1}\;{\Omega}{\cdot}cm$ to $3.0{\times}10^{-2}\;{\Omega}{\cdot}cm$, and the average diameter of the fiber webs was varied in the range of 310 to 160 nm with increasing the carbonization temperature. These results could be explained that the graphitic region of carbon webs was formed after carbonization at high temperatures. And the amorphous structure of polymeric fiber webs was significantly changed to the graphitic crystalline, resulting in shrinking the size of fiber diameters.

Behaviour of fiber reinforced concrete beams with spliced tension steel reinforcement

  • Safan, Mohamed A.
    • Structural Engineering and Mechanics
    • /
    • v.43 no.5
    • /
    • pp.623-636
    • /
    • 2012
  • The aim of the current work is to describe the flexural behaviour of simply supported concrete beams with tension reinforcement spliced at mid-span. The parameters included in the study were the type of the concrete, the splice length and the configuration of the hooked splice. Fifteen beams were cast using an ordinary concrete mix and two fiber reinforced concrete mixes incorporating steel and polypropylene fibers. Each concrete mix was used to cast five beams with continuous, spliced and hooked spliced tension steel bars. A test beam was reinforced on the tension side with two 12 mm bars and the splice length was 20 and 40 times the bar diameter. The hooked bars were spliced along 20 times the bar diameter and provided with 45-degree and 90-degree hooks. The test results in terms of cracking and ultimate loads, cracking patterns, ductility, and failure modes are reported. The results demonstrated the consequences due to short splices and the improvement in the structural behaviour due to the use of hooks and the confinement provided by the steel and polypropylene fibers.

Flowing Characteristic of High Flowing Self-Compacting Concrete with mixing Steel Fiber (강섬유 혼입에 따른 고유동 자기충전 콘크리트의 유동특성)

  • Choi, Yun-Wang;Choi, Wook;Kim, Gi-Beom;Jeong, Jae-Gwon;Ahn, Tae-Ho;Eom, Joo-Han
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2008.04a
    • /
    • pp.461-464
    • /
    • 2008
  • This study is compactability and Passing ability to get to know the flowing characteristic of high flowing self-compacting concrete with mixing steel fiber of various size and diameter. After flowing test, size and diameter are getting longer, flowing performance is getting lower. It meets the standard of combined high flowing self-compacting concrete of JSCE 2 grade and passing performance from ASTM C 1621. Through this study, it can be possible to be applied in site of HSCC with mixing steel fiber.

  • PDF

Dimensional Variation of Vessel Element and Fiber in Alnus hirsuta and A. firma (물오리나무와 사방오리나무에 있어서 도관요소 및 섬유의 칫수 변이)

  • 소웅영;한경식
    • Journal of Plant Biology
    • /
    • v.28 no.1
    • /
    • pp.9-20
    • /
    • 1985
  • Dimensional variation of secondary xylem elements, such as vessel element and fiber, was investigated in root, stem and branch of Alnus hirsuta and A. firma. It is clear that vessel diameter in the root is the widest, next in the stem, and the least in the branch. Length of vessel element among them becomes, however, larger in following sequence; stem, root, and branch, whereas fiber diameter and length are the widest in the root, the second in the stem, and the least in the branch. The size of secondary xylem element at any one level in tree increases from the center (pith) of the organs through a number of annual rings to the outer.

  • PDF

Research for Kenaf Fiber Production in Korea (국내 재배 케냐프를 이용한 의류 소재 개발 연구)

  • 한영숙;유혜자;이혜자;이전숙;김정희;송경헌;안춘순
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.27 no.7
    • /
    • pp.862-871
    • /
    • 2003
  • Kenaf has been estimated as an economic and environmentally compatible crop. This study purposed to enlarge the use of kenaf as textile materials and to develope high value-added textile fibers. Kenaf has been cultivated successfully and grown fast in Jeju. The height of kenaf stalks was about 220cm at 105 DAP and 400cm at 150 DAP, After harvesting at 105 DAP and seperating the basts from harvested kenaf stalks, decorticated kenaf basts were rotted in water at 15~$25^{\circ}C$ for biological rotting and were treated with 1%, 4% and 7% NaOH at 9$0^{\circ}C$ for chemical retting. The properties of extracted fibers were compared: such as fiber diameter. Transversal and longitudinal views, colors, crystallinities, strengths and elongations etc. The diameter of kenaf bast fibers was 15~25 ${\mu}{\textrm}{m}$. Biologically rotted kenaf bast fibers had well developed lumens which were diminished after chemical retting. The degree of crystallinities of biologically rotted kenaf bast fiber was about 92~96% showed higher than those of chemically rotting. The biologically rotted fibers were bright and had creamy color. Yelloweness increased at chemically rotted fibers. Fiber bundle strengths were from maximum 98076.9 (gf/g) to minimum 63749.5 (gf/g). Fiber bundle strengths of biologically rotted kenaf fibers appeared greater than those of chemically rotted fibers. Alkali treatments of chemical rotting could make strength lower and elongation higher. Rotting method might be one of the most importance factors affecting to final fiber properties.

Fabrication of a Multidirectional Side-firing Optical Fiber Tip and Its Numerical Analysis (다방향 조사가 가능한 광섬유 팁 해석 및 제작)

  • Jung, Deok;Sohn, Ik-Bu;Noh, Young-Chul;Kim, Jin-Hyeok;Kim, Changhwan;Lee, Ho
    • Korean Journal of Optics and Photonics
    • /
    • v.25 no.4
    • /
    • pp.200-206
    • /
    • 2014
  • In this paper, using the value theoretically calculated to emit multidirectionally a beam coming into an optical fiber with diameter of $125{\mu}m$, we modeled and produced a cone-shaped structure at the distal end of the fiber. A numerical simulation was performed for an optical fiber tip in which all incident beams were totally reflected and emitted toward the side, as well as for an optical fiber tip from which the beams could be emitted forward and sideways simultaneously. We produced multidirectional-firing optical fiber tips based on the simulation result and model. Laser fabrication of the optical fiber was done by processing a cone-shaped structure at the distal end of an optical fiber with diameter of $125{\mu}m$ using a femtosecond pulsed laser and polishing the processed surface with a $CO_2$ laser. We also conducted an analysis to compare experimental and simulation results.