• 한국식품조리과학회지
• /
• 제10권3호
• /
• pp.249-253
• /
• 1994

In this study, total dietary fiber contents, acid detergent fiber contents lignin, water binding capacity (WBC), iron binding capacity of ADF and rutin contents from Korean buckwheats were determined. Total dietary fiber (TDF) content was 3.14% in kyungbuk rice buckwheat, 5.65% in kangwon hull buckwheat and 3.35% in kangwon rice buckwheat. Acid detergent fiber (ADF) content was 2.47, 4.46 and 2.94%, respectively and lignin content was 1.14, 1.60 and 1.08% respectively. The water binding capacity of these three sample dietary fiber showed that TDF were in the range of 2.87~3.88 g %H_2O$/g DF and ADF were in the range of 4.62~5.26 g %H_2O$/g DF. The iron binding capacity of ADF at pH 5.0, 6.0, 7.0 were 79.11, 78.01, 46.16% in kyungbuk rice buckwheat, 70.63, 63.83, 53.60% in kangwon hull buckwheat and 77.67, 76.33, 50.25% in kangwon rice buckwheat. The rutin contents of these samples and their hulls were 13.54~16.41 mg/100 g groats and 12.13~14.24 mg/100 g in hulls. The rutin content of kyungbuk rice buckwheat was the highest.

• 한국농공학회지
• /
• 제41권3호
• /
• pp.59-65
• /
• 1999

This study has been performed to confirm the three dimensional effect of the crack reduction and the restrained effect of crack growth for the synthetic fiber reinforced soil. Two types of polyrpropylene fiber and low plastic clay(CL) were used for the test. And the test variable were fiber length and so on. The results of the study were summarized as follows ; 1) The mixing of synthetic fiber was effective in reducing crack growth due to adhesion between soil partlcles and synthetic fiber.l Especially initlal crack was delayed, as compared with the pure soil, for about 1 day in case of mono filament synthetic fiber and for about 1 or 2 days in case of fibrillated syntetic fiber. 2) As the content and length of synthetic fiber were increased , the effect of crack reduction was increased. It was found that 0.5% fibrillated synthetic fiber with 40mm length reinforced soil had about 3 times more effective than natural soils. 3) In case of the same fiber content and fiber length, the fibrillated synthetic fiber has nmore effective than the mono filament synthetic fiber for crack reduction.

• 한국지반공학회논문집
• /
• 제19권2호
• /
• pp.189-197
• /
• 2003

본 논문은 공진주시험과 삼축압축시험을 이용하여 소변형률(0.0001%~l%) 범위에서 섬유혼합토의 변형 특성을 규명하였으며, 최대전단탄성계수를 잣대로 보강효과를 평가하였다. 또한 단섬유의 직경에 대한 길이의 비(형상비), 흙의 중량에 대한 섬유 중량의 섬유혼합비, 단섬유의 종류에 따른 보강효과를 비교 검토하였다. 시료는 주문진 표준사에 폴리프로필렌 재질의 단섬유를 무작위로 배합하여 사용하였다. 섬유혼합토의 최대전단탄성계수는 비혼합토에 비해 최대 30%까지 증가하였고, 비선형 영역에서의 전단탄성계수 감소량도 억제되었다. 형상비가 증가할수록 최대전단 탄성계수는 증가하고, 단사에 비해 망사의 보강 효과가 큰 것으로 나타났다. 섬유혼합비는 0.3 % 부근에서 보강효과가 가장 커, 최적인 것으로 확인되었다.

• 한국식품조리과학회지
• /
• 제11권1호
• /
• pp.20-25
• /
• 1995

가열방법 및 시간에 따른 백미, 현미, 노란콩 및 검정콩의 식이섬유 측정치의 변화 양상은 다음과 같다. 불용성 식이섬유는 가열처리 방법에 따라 변화 양상이 각각 다르게 나타났으며 노란콩을 제외한 다른 시료에서는 가열시간에 크게 영향받지 않는 것으로 나타났다. 수용성 식이섬유는 가열처리에 의해 대체로 증가하는 경향을 보였으며 가열방법에 따라 변화양상이 다르게 나타났다. 가열시간이 길어짐에 따라 백미의 수용성 식이섬유는 증가하였으나 현미는 감소하는 경향을 나타내었다. 그러나 노란콩은 가열시간에 따른 일정한 경향을 나타내지 않았으며 검정콩은 가열시간에 영향받지 않는 것으로 나타났다. 가열처리에 의한 총식이섬유의 변화는 대체로 불용성 식이섬유와 비슷한 경향을 나타내었으며 이는 모든 시료들이 수용성 식이섬유 보다는 불용성 식이섬유의 함량이 현저히 많고 본 실험에서 총식이섬유를 불용성 식이섬유와 수용성 식이섬유의 합으로 계산했기 때문이라 생각된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제3권4호
• /
• pp.353-361
• /
• 1990

A number of correlation and regression analyses were performed on data from apparent and true digestibility of amino acids at ileal and fecal level with finishing pigs, in order to investigate whether these amino acid digestibilities could be predicted with certainly degree on their fiber fractions content (chemical analysis). The data comprised 16 diets varying in 4 levels of crude fiber and from 4 fiber sources. The relationships between fiber fractions including crude fiber (CF), NDF, ADF lignin and cellulose contents on apparent and true digestibility of almost all amino acids in both ileal and fecal level were negative, except glutamine at fecal level. In apparent digestibility at ileal level, the correlations of fiber fractions were moderate (r of NDF = 0.53 to 0.63; ADF, 0.50 to 0.77; cellulose, 0.50 to 0.75), with an exception of CF content was relatively high (r of 0.58 to 0.81). The correlations to true digestibility of amino acids were weaker. In case of at fecal level, the higher correlation (negative) was found with NDF than CF content. Estimations of amino acids digestibility were performed using regression equation. The data showed that apparent digestibility of amino acids could be estimated for almost amino acids except arginine, threonine, valine and tyrosine at fecal level and phenylalaine, valine and glycine at ileal level. The best prediction at ileal and fecal level ($r^2=0.55-0.77$ and 0.52-0.76), respectively was obtained with NDF content. Prediction for true digestibility of amino acids, none of fiber fractions could be estimated for arginine, leucine and valine at all collection levels. At ileal level, CF could be used for most of amino acids except phenylalanine, glycine and praline; cellulose, only for lysine and methionine and NDF, only for proline. At fecal level, glutamine digestibility could be estimated only from CF and ADF content. The best predictor at ileal level was ADF content whereas at fecal level was NDF content. These results indicate that lignin content could not be used as predictor for all amino acids at both levels neither in apparent nor true digestibility.

• 한국축산식품학회지
• /
• 제37권5호
• /
• pp.780-786
• /
• 2017

The objective of this study was to investigate the relationship between muscle fiber characteristics, intramuscular fat (IMF) content, and fatty acids composition in longissimus lumborum (LL) muscle from Hanwoo steers. The LL muscles were obtained from four quality grades (QG) carcasses and subjected to histochemical analysis. There were significant (p<0.05) differences in fiber number percentage (FNP) and fiber area percentage (FAP) of muscle fiber types among muscles from four QGs. Both FNP and FAP of type I increased while those of type IIB decreased with increasing QG from QG 2 to QG $1^{{+}{+}}$ (p<0.05). Also, with increasing QG, the saturated fatty acid (SFA) proportion decreased while monounsaturated fatty acid (MUFA) increased significantly (p<0.05). IMF content was positively correlated with both FNP and FAP of type I, but negatively correlated with those of type IIB. The proportions of SFA and MUFA were significantly (p<0.001) correlated with both type I and IIB composition. These results implied that muscle fiber type composition is an important factor influencing fatty acid composition in LL muscle of Hanwoo steer.

• 한국가구학회지
• /
• 제14권1호
• /
• pp.1-9
• /
• 2003

This research was carried out for packing materials and building materials to examine thylene gas adsorption and effect of keeping fruit fresh of wet formed charcoal-fiber mposite made from defibrated fiber of Pinus densiflora Sieb. et Zucc. and white charcoal from uercus variabilis Bl.(wood fiber: charcoal=8:2, 6:4, 4:6, 2:8), with/without phenol formaldehyde resin(PF, Non volatile content:$52\%$, resin content $1,3,5\%$). The results are summarized as follows: 1. The higher the charcoal content, the more the ethylene gas adsorption. At the same mixing ratio of fiber to charcoal, $\#100-200$ of charcoal particle size gave the better reslts than $\#60-100$. 2. Adding PF into the charcoal fiber composite decreased the capacity of ethylene gas adsorption but there was no significant difference until $5\%$ adding amount of PF. 3. For keeping fruit fresh for a long time, Charcoal fiber composite was $66\%$ longer than control. The higher the white charcoal content, the longer fresh time.

• Journal of the Korean Wood Science and Technology
• /
• 제24권3호
• /
• pp.101-109
• /
• 1996

Effects of process variables were evaluated in physical properties of the wood fiber-thermoplastic fiber composites using nonwoven web method. Turbulent air mixer using compressed air was employed to mix wood fiber with two types of thermoplastic polypropylene and nylon 6 fibers. The optimal hot press temperature and time were found to be $190^{\circ}C$ and 9 minutes in wood fiber-polypropylene fiber composite and to be $220^{\circ}C$ and 9 minutes in wood fiber-nylon 6 fiber composite. As the density of wood fiber-polypropylene fiber composite and wood fiber-nylon 6 fiber composite increased, the physical properties were improved The density appeared to be the most significant factor on physical properties in the statistical analysis. The composition ratio of polypropylene or nylon 6 fiber to wood fiber was considered not to be statistically significant factor. The thickness swelling decreased somewhat in wood fiber-polypropylene fiber composite and wood fiber-nylon 6 fiber composite as the content of synthetic fiber increased. As the increase of mat moisture content, dimensional stability was improved in wood fiber-polypropylene fiber composite but not in wood fiber-nylon 6 fiber composite.

• 펄프종이기술
• /
• 제43권5호
• /
• pp.27-33
• /
• 2011

Hemp bast pulp cooked at temperature below $100^{\circ}C$ followed by defibration by the knife and the valley beater, respectively was mixed with softwood pulp varying the amount of hemp pulp in order to find the optimum condition for making hemp-wood paper. Both the knife and the valley beaters contributed to the dispersion of pulp fiber well. Lots of shives were found when the knife beater was applied exclusively, but the fibers were dispersed well when freeness dropped to 600 mL CSF and 500 mL CSF by the valley beater. Air resistance decreased drastically below 500 mL CSF where rapid disrupture of pulp fiber occurred. As the values for freeness and hemp fiber content increased, so did roughness and bulk. It was apparent that the tear strength of hemp-wood paper was on the rise drastically as hemp fiber content increased. Nevertheless the optimum hemp fiber content of hemp-wood paper would be 20% considering the decrease in both tensile and burst strengths as well as sheet formation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.55-58
• /
• 2007

This study investigates the spatting properties of high strength concrete, $60\sim80MPa$ class, designed with diverse aspect ratios and fiber content of nylon(NY). Test showed that increase of fiber content and aspect ratio in concrete decreased the fluidity of fresh concrete, especially for 1580 and 3000 aspect ratio of fiber. As for the compressive and tensile strength, adding NY fiber did not significantly affect the values In the range of high strength. After completing the fire test, the specimens containing both 750 and 1000 aspect ratios of fiber protected the spatting occurrence even in 0.05vol.% of fiber content. This specimens indicated the residual compressive strength ratio at 37%, showing the most favorable value among other specimens. Therefore, it is demonstrated that to protect the spalling in high strength concrete considering the effective fluidity, strength and economic efficiency altogether, adding 0.05vol.% of NY fiber with 750 aspect ratio Is beneficial.