• 콘크리트학회논문집
• /
• 제26권6호
• /
• pp.761-769
• /
• 2014

인장강도 및 휨강도가 낮고 취성파괴의 특성을 가지는 일반적인 콘크리트의 단점을 극복하기 위하여 최근에는 압축강도가 180 MPa이상인 고성능 콘크리트에 강섬유를 혼입한 강섬유 보강 초고성능 콘크리트(UHPC)에 대한 연구가 활발히 진행되고 있다. UHPC 바닥판과 강재 거더를 이용하여 합성보를 구성할 때, UHPC 바닥판의 높은 강도와 강성으로 인하여 강재거더 상부 플랜지의 역할이 거의 불필요할 것으로 예상된다. 이러한 점을 착안하여 본 논문에서는 합성보 구성 시에 강재 거더의 상부플랜지를 없앤 역T형 거더를 적용하였다. 역T형 거더에 UHPC바닥판을 합성하여 합성보를 구성할 경우, 상부플랜지가 없는 이유로 전단연결재의 설치 위치가 상부플랜지 대신에 강재 거더 복부에 설치해야하는 문제점이 발생되며, 강재 복부에 설치되는 전단연결재에 대한 거동, 역T형 강거더 합성보의 휨거동 특성 등은 현재까지 실험 및 이론적으로 평가된 적이 거의 없는 실정인 이유로 이에 대한 연구가 절실하다. 이를 위하여 본 논문에서는 전단연결재 간격, 바닥판 두께 등을 변수로 하여 역T형 거더와 UHPC바닥판을 합성한 합성보를 8개 제작하여 전단연결재의 거동, 휨거동 특성 등을 파악하고자 하였다. 실험결과를 기준으로 볼 때, 향후 UHPC의 경우 스터의 간격은 100 mm에서 바닥판 두께의 2~3 배 사이로 규정함이 적절할 것으로 예상된다. 또한 실험 부재의 특성 상대변위는 Eurocode-4의 연성거동 기준에 의하면 충분한 연성 거동을 하는 것으로 판정되었으며, 바닥판이 지나치게 얇고 전단연결재의 간격이 지나치게 넓은 경우를 제외한 대부분의 부재들은 일반 콘크리트보다 UHPC의 성능이 우수하여 기존의 AASHTO LRFD 및 Eurocode-4의 식과 실험결과간의 차이가 있음을 알 수 있다.

• 한국항해항만학회지
• /
• 제26권3호
• /
• pp.323-328
• /
• 2002

강판벽체와 뒷채움 지반의 상호작용에 의해 외력을 지지하는 지중강판구조물은 도로 제방의 하부 통·수로 구조물로 널리 사용되고 있다. 해안도로로 사용되는 성토체 내에 통로용 횡단구조물로 설치한 직경 6.25m의 원형단면 지중강판구조물에 대하여 상부 도로의 차량 통행에 의한 활하중 작용시 강판 벽체의 축력과 모멘트 변화를 평가하고, 토목섬유에 의한 강판구조물 상부 지반의 보강효과를 검증하였다. 이를 위하여 실제 구조물을 대상으로 정적 및 동적 차량재하시험을 실시하고, 구조물 내에 발생하는 축력과 모멘트, 그리고 구조물에 작용하는 토압을 계측하였으며 그 결과를 각각 분석하였다. 또한 지오그리드를 이용한 토피부 보강 효과에 대해서도 검증하였다. 차량하중 작용시 강판 부재의 축력은 주로 상부 아치부에서 증가하였으며, 그 최대값은 구조물 정점부 또는 도관 어깨부에서 발생하였다. 모멘트도 상부 아치부를 중심으로 증가하는 형태를 보였으나, 그 크기는 무시할 수 있을 만큼 작았다. 정적차량하중이 가해질 때 토피부에 지오그리드를 포설한 단면에서 계측된 최대축력 증가량은 지오그리드가 설치되지 않은 단면에서 계측된 값의 85∼92%를 나타내어 사하중에 대한 효과 외에 추가적인 축력감소 효과를 확인할 수 있었으나 차량주행시에는 차량하중에 대한 추가적인 보강 효과는 없어짐을 관찰하였다. 동적재하시험을 통해 산정한 충격계수 (DLA)는 토피두께가 0.9m에서 1.5m까지 증가함에 따라 반비례하여 감소하였는데, 그 크기는 CHBDC 방법으로 예측한 값보다 1.2-1.4배 정도 크게 나타났다.

• 농업생명과학연구
• /
• 제44권5호
• /
• pp.1-8
• /
• 2010

이 연구에서는 녹차를 이용한 친환경 복합보드를 건축내장재로의 활용을 위하여, 녹차의 다양한 기능성과 목재섬유의 우수한 강도특성을 살려 녹차-목재섬유 복합보드를 제작하였고, 녹차-목재섬유 복합보드의 정적 휨강도성능에 미치는 녹차와 목재섬유 배합비율 및 접착제의 영향을 조사하였다. 녹차-목재섬유복합보드의 휨 강도성능은 녹차의 배합에 따라 대조보드 (control 보드) 보드의 그것보다 감소하였는데, 그 감소비율은 전반적으로 녹차배합비율이 증가할수록 커지는 경향을 나타내었다. 또한, 보드제조에 사용된 수지의 종류에 따라 강도성능의 차이가 나타났는데, 포름알데히드 방산량이 많은 $E_1$급 요소수지가 $E_0$급 요소수지보다 휨 탄성계수에서는 1.08~1.53배 그리고 휨 강도는 1.19~1.82배의 더 높은 값을 나타내었으며, 녹차의 배합비율이 커질수록 양자의 차이는 커지는 것이 확인되었다. 휨 강도는 $E_1$급 요소수지의 경우, 시판용 중밀도섬유판 (medium density fiberboard, MDF)의 0.94~1.03배의 값을 나타내어 시판용 중밀도섬유판과 거의 차이가 없었고, 녹차와 목재섬유를 복합한 우수한 친환경 기능성복합보드제조가 가능한 것이 밝혀졌다.

• 박물관보존과학
• /
• 제29권
• /
• pp.1-32
• /
• 2023

국립중앙박물관이 소장하고 있는 필자미상회혼례도(筆者未詳回婚禮圖)(덕수6375)는 회혼례의 장면을 그린 다섯 폭의 화첩이다. 회혼례는 부부의 혼인 60년을 기념하여 혼례식을 다시 행하며 주변의 축하를 받는 기념행사로, 이 화첩에는 전안례, 교배례, 헌수례, 접빈, 중뢰연의 장면을 기록하였는데 인물과 건축물, 여러 가지 기물 등을 섬세한 필치로 세밀하게 묘사한 회화 자료이다. 제작 기법 연구를 위해 현미경, 적외선, 엑스선 조사와 함께 초분광영상분석이 사용되었다. 비가시영역에 대하여 밑그림 확인, 색상에 따라 사용된 안료와 염료를 구별하고자 하였다. 엑스선형광분석으로 안료의 성분을, 자외선-가시광선분광분석으로 염료의 종류를 판별하였다. 현미경 조사를 통해 확인된 회혼례도에 사용된 직물의 재료는 섬유의 꼬임이 거의 없는 생견사이며 평직으로 제직된 평견직물로 확인되었다. 초분광영상분석과 엑스선형광분석, 자외선-가시광선분광분석으로 백색은 연백, 흑색은 먹으로 확인되었 다. 적색은 주토, 진사, 진사와 연단 혼합, 갈색은 주토 및 유기 염료, 황색은 등황을 사용한 것을 알 수 있었다. 녹색은 쪽, 석록, 크롬그린과 황화바륨, 청색은 석청, 회청, 쪽으로 확인되었다. 자색은 쪽과 연지충 혼합으로 추정되었고 금색은 금분을 사용한 것으로 나타났다. 초분광영상에서 보존처리 영역을 식별하여 손상부분과 보존처리부분 등을 구분할 수 있었다.

• 헤리티지:역사와 과학
• /
• 제56권1호
• /
• pp.80-97
• /
• 2023

본 연구에서는 조선시대 후기부터 현재까지 보존된 경복궁, 창덕궁 그리고 칠궁 내 일부 전각의 도배지를 채취하여 조선 왕실에서 도배지로 사용한 종이의 종류와 특징을 파악하고자 하였다. 이에 첫 번째로, 고문헌 조사를 바탕으로 왕실에서 사용된 도배지 기록을 통해 왕실에서의 도배 특성을 확인하였다. 두 번째로, 건립 시기가 비교적 분명한 전각을 대상으로 현장 조사를 실시하여 시료확보 후 초배지 분석을 실시하였다. 따라서 왕실 도배지로 활용된 한지의 주원료를 확인하였으며, 청색 장식지 분석을 통해 격식을 갖춰야 하는 공간에 사용된 청색 발색물질(염료·안료)의 종류를 파악하였다. 분석을 통해 확인한 결과를 토대로 조선시대 궁궐 도배지와 관련한 고문헌 기록과 대조함으로써 문헌의 기록과 현존 도배지 실물을 확인하고, 향후 궁궐 도배지의 보수 시 문화재 복원의 기초자료를 제공하고자 하였다. 17~20세기 영건의궤류 36건 등에 기록된 도배 관련 내용을 추출하여 시기별 도배지 종류 변화, 사용처에 따른 도배지 종류 등의 내용을 검토한 결과, 의궤 제작용 한지와 도배용 한지의 명칭이 다르지 않아 조선시대에는 문서지와 도배지를 구분하지 않고 사용했음을 알 수 있었다. 또한 시대별 도배지의 종류는 차이가 있지만 백지, 후백지, 저주지, 초주지, 각장이 도배의 기저를 이루는 것은 조선 말기까지 지속된 것이 확인된다. 궁궐 벽체와 직접 붙어있던 면의 초배지를 대상으로 섬유의 형태학적 특성 및 정색 반응(KS M ISO 9184-4: 그라프 "C" 염색 시험)을 통해 섬유 식별을 실시한 결과, 왕실에서 도배지로 활용된 한지의 주원료를 확인하였으며 전각의 건립 시기에 따라 당시 한지를 제작하는 데 사용한 지료의 원재료를 파악하였다. 또한 청색 장식지의 발색원료를 광학현미경, 자외-가시광 분광분석(UV-Vis), X선 회절분석(XRD)을 통해 분석한 결과 격식을 갖춰야 하는 공간에 사용된 청색 장식지의 염료 및 안료의 종류를 파악하였으며 청색을 내기 위한 원료로서 쪽, 청금석, 코발트블루 등이 사용된 것이 확인되었다.

• Journal of Nutrition and Health
• /
• 제56권6호
• /
• pp.602-614
• /
• 2023

본 연구는 근생성 및 근위축 완화효능을 가진 유효소재 발굴의 필요성에 의해 polygalacin D가 근원세포 분화 및 미토콘드리아에 미치는 영향과 항암제 유도 근위축에 대한 완화효과를 각각 세포 및 동물실험을 통해 확인하고자 하였다. 그 결과, polygalacin D는 다핵을 지닌 근관세포의 수와 분화 종결인자인 MHC isoforms의 발현량을 증가시켰고 근육 내 단백질 분해 인자인 MuRF1, Smad2/3의 발현량은 유의적으로 감소시켰다. 또한 미토콘드리아 생합성 조절인자인 Pgc1α의 발현은 증가시키고 미토콘드리아 분열인자인 Drp1과 Fis1의 발현은 감소시켰다. 한편 zebrafish 동물모델을 통해 항암제 유도 근위축에 대한 개선효과를 확인한 결과, polygalacin D는 항암제에 의해 유도된 근위축과 미토콘드리아 손상을 완화시켰다. 이상의 결과들은 polygalacin D가 미토콘드리아 기능 증진을 매개로 근원세포 분화 촉진 및 근육 단백질 분해 저하 효과를 지닐 뿐만 아니라, 미토콘드리아 손상을 개선하여 항암제로 유도된 근위축에 대한 완화 효과를 나타냄을 시사한다. 따라서 본 연구를 통해 polygalacin D가 근생성 및 근위축 예방과 치료를 위한 잠재적인 유효소재로서의 가능성을 제시하였다.

• Journal of Nutrition and Health
• /
• 제44권5호
• /
• pp.355-365
• /
• 2011

본 연구는 지방의 종류와 함량이 다른 식이의 섭취가 하지 고정 흰 쥐의 근육 내 화학 조성, PPAR${\delta}$ 및 관련 효소의 발현에 미치는 영향을 근육 종류에 따라 알아 보기 위해 수행되었다. 연구결과를 요약하면 다음과 같다. 1) 10일 간의 하지고정과 식이 중재에 의해 실험동물의 체중, 식이섭취량 및 혈청 지방산에는 유의적인 차이가 없었다. 2) 10일 간의 하지고정에 따라 근육 양은 하지 근육 종류에 따라, 각각 soleus 에서 약 57%, plantaris에서 약 39% 그리고 gastrocnemius에서 약 38%로 달리 감소되었다 (p < 0.01). 특히 soleus에서 가장 많은 감소 현상을 보였다. 이러한 감소 경향은 식이 지방의 종류 및 함량에 영향을 받지 않았다. 3) 10일 간의 하지고정에 따라 근육 내 조성 변화의 경우, gastrocnemius에서 분석한 근육 총 단백질량은 정상 다리(contralateral)와 비교하여 하지고정에 따라 유의적으로 감소 (CO, 41%; FO, 40%; HCO, 37%; HBT, 38%)하였다. Plantaris, gastrocnemius에서 분석한 근육 내 중성지방량의 경우에도, 정상다리와 비교하여 하지고정에 따라 plantaris(CO, 39%; FO, 27%; HCO, 38%; HBT, 35%)와 gastrocnemius(CO, 38%; FO, 34%; HCO, 33%; HBT, 34%) 모두에서 유의적으로 감소하였다. 그러나, 근 단백질량과 중성지방량의 감소 현상은 모두 식이군 간의 차이는 나타나지 않았다. 4) PPAR${\delta}$ 단백질은 하지고정에 의해 plantaris에서는 유의적으로 증가 (p < 0.05)하였고, gastrocnemius, soleus에서는 증가하는 경향을 나타내었다. PPAR${\delta}$ 단백질과는 반대로 PPAR${\delta}$ mRNA는 하지고정에 의해 plantaris에서는 유의적으로 감소 하였고, soleus에서는 FO군만 PPAR${\delta}$ mRNA 발현 양이 유의적으로 감소하였다. PPAR${\alpha}$의 경우 하지고정에 따라 두 근육에서 모두 영향을 받지 않았다. mCPT1 mRNA는 하지고정에 따라 soleus와 plantaris 모두에서 변화가 없었지만, PDK4 mRNA는 하지고정에 따라 plantaris에서 유의적으로 감소하였고, 반대로 soleus에서는 유의적으로 증가하였다. 5) PPAR${\delta}$ 단백질은 세 근육의 FO군에서 모두 크게 증가하는 경향을 보였지만, 식이에 따른 유의적인 차이를 보이지는 않았다. PPAR${\delta}$ mRNA의 경우, plantaris의 CO군과 비교해 FO군에서 mRNA 발현이 유의적으로 낮은 수준이었고, 다른 군에서는 유의적인 차이가 없었다. Soleus의 PPAR${\delta}$ mRNA는 CO군과 비교해 FO, HCO 그리고 HBT군 모두에서 발현 양이 유의적으로 낮은 수준을 보였다. 반면, PPAR${\alpha}$의 mRNA 발현은 두 근육에서 모두 식이에 의한 영향을 받지 않았다. mCPT1 mRNA 발현의 경우, plantaris에서는 CO군과 비교해 FO군에서 발현 양이 유의적으로 낮은 수준을 보였지만, 고지방 식이 군에서는 유의적인 차이가 없었다. 반대로, soleus에서는 CO군과 비교해 FO군에서 발현이 유의적으로 높은 수준을 보였지만, 고지방 식이 군에서는 CO군과 비교해 유의적인 차이는 없었다. PDK4 mRNA의 경우, plantaris에서는 CO군과 비교해 FO군의 mRNA 발현 양이 유의적으로 높은 수준을 보였다. 고지방 식이 군에서는 CO군과 비교해 발현 양의 유의적인 차이가 없었다. 한편, soleus에서는 FO군에서 발현이 낮은 경향을 보였을 뿐, 식이에 따른 mRNA 발현에는 모든 군에서 유의적인 차이가 없었다. 본 연구에서는 10일간의 하지고정에 의해서 모든 근육에서 유의적인 근 위축이 유발되었고, 이에 따라 근육 양의 감소와 함께 근육 총 단백질의 유의적인 감소가 나타났다. 하지만 근육 총 단백질과 중성지방의 유의적인 감소에도 불구하고, 하지고정에 의한 근육 내 중성지방 축적은 일어나지 않았다. 이는 하지고정에 의해 모든 근육에서 증가된 PPAR${\delta}$ 단백질이 하지고정 초기에 근육 내 중성지방의 축적을 억제했을 것으로 사료된다. 결론적으로, 하지고정에 따른 근 위축에 의해 근육 내 지질대사를 조절하는 PPAR${\delta}$의 mRNA 발현은 감소하였지만, ${\omega}$-3 PUFA를 함유한 어유 식이는 PPAR${\delta}$ 단백질 및 관련 효소의 발현 수준과 활성에 근 섬유별특성에 따라 긍정적인 영향을 줌으로써 근육 내 지질축적을 비롯한 근위축의 경감에 도움을 줄 수 있다는 가능성을 제시하였다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.