• Archives of Plastic Surgery
• /
• v.38 no.4
• /
• pp.369-375
• /
• 2011

Purpose: Many hemostatic agents and dressings have been tested with variable degree of success. Chitosan has a positive charge, it attracts red blood cells, which have a negative charge. Our goal is to test the efficacy of new developed chitosan-based hemostatic materials in providing durable hemostasis in a high-flow arterial wound model. Methods: We compared each group with SD rats motality tests and in vitro blood compatibility test by blood clotting index (BCI). We devided the SD rats into 6 groups (N =15) by type of hemostatic agents. A: 100% nonwoven chitosan (degree of the deacetylation: 90%). B: 50% N-acetylation on nonwoven of chitosan gel (degree of the deacetylation: 50%). C: 60% N-acetylation on nonwoven of chitosan ge (degree of the deacetylation: 40%)l. D: Cutanplast$^{(R)}$. E: HemCon$^{(R)}$ F: Gauze. In vivo test, a proximal arterial injury was created in unilateral femoral arteries of 90 anesthetized SD rats. Each materials was made same size and thickness then applied to the injury site for 3 minutes. In vitro test, we compared each group with BCI in human blood. Results: In vivo test, group A showed lower motality rate of 46% than any other groups, Group B and C showed lower motality rate of 60% than group D and E's motality rate of 66%. In vitro test, BCI of group A ($30.6{\pm}1.2$) and B ($29.3{\pm}1.0$) were showed nearly about group D ($29.1{\pm}1.8$) and E ($27.4{\pm}1.6$). Group C ($37.1{\pm}2.0$) showed higher BCI than group A and B, it means group C decreased blood clotting. Conclusion: In conclusion, this study suggests a newly developed chitosan-based hemostatic materials induced durable hemostasis and increased blood clotting, and are considered as effective biologic hemostatic agents.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.5
• /
• pp.79-86
• /
• 2009

With the substantial increase of the size of structure, the management of excavation becomes more difficult. Therefore, massive collapses which are related to retaining wall recently increase. However, since the study on measuring and monitoring the pre-stressing force of anchor is insufficient, behavior of anchor may not be predicted and monitored appropriately by the existing strain gauge and load cell type monitoring system. FBG Sensor, which is smaller than strain gauge and has better durability and does not have a noise from electromagnetic waves, is adapted to measure the strain and pre-stressing force of 7-wire strand, so called smart tendon. A series of pullout tests were performed to verify the feasibility of smart tendon and find out the load transfer mechanism around the steel wire tendon fixed to rock with grout. Distribution of measured strains and estimated shear stresses are compared with those predicted by theoretical solutions. It was found that developed smart tendon can be used effectively for measuring strain of 7-wire strand anchor and theoretical solutions underestimate the magnitude of shear stress and load transfer depth.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.439-446
• /
• 2023

Ceramic membranes are generally used for various industrial processes operating under extreme conditions because of its high thermal and chemical stability. However, due to the trade-off phenomenon of permeability and mechanical strength, preparation of high permeability-high strength membrane is necessary. In this study, the change in characteristics and performances of ceramic membranes was analyzed depending on the type of polymer binder and its mixing ratio. Because the solubility between solvent and polymer binder was higher in PSf (polysulfone) than in PES (polyethersulfone), the viscosity and discharge pressure of the PSf-based dope solution were higher than those of PES-based dope solution. When PSf was used as a polymer binder, ceramic membrane showed high mechanical strength and low water permeability due to the dense structure. On the other hand, in case of PES, the mechanical strength was slightly reduced and the water permeability was increased. It was confirmed that the optimum mixing ratio of the PSf and PES with high water permeability and mechanical strength was 9:1.

• Resources Recycling
• /
• v.32 no.6
• /
• pp.3-9
• /
• 2023

Separation of LED packages from PCBs and analysis of the adhesive components was conducted to enhance the recycling potential of LED modules. LED package was separated from PCBs using heat treatment under optimal conditions: temperature of above 250 ℃ and time of 20 minutes. The separation equipment can be established using a hot air injector with controlling the rotational speed of the internal screw. The separation efficiency of each type of substrate (aluminum and glass fiber) was investigated with the thickness range of the adhesive materials (0.25-0.30 and 0.30-0.35 mm). Under the optimal conditions, the efficiency can reach to 97.5% for both types of substrates with adhesive materials of thickness 0.25~0.30mm. Characterization of the residual adhesive substances from the separated LED package and PCB using microwave digestion and ICP analysis showed that the residue contained of 95% of Sn, less than 5% of Cu and Ag.

• Journal of Life Science
• /
• v.24 no.10
• /
• pp.1102-1109
• /
• 2014

Chungkookjang has several functional properties, such as fibrinolytic activity, anticancer effects, and antioxidant effects. However, children do not like Chungkookjang because of its foul odor. A mixed culture of Bacillus subtilis MC31 and Lactobacillus sakei 383 was used to improve the production of GABA in Chungkookjang and its flavor. Most of the foul odor of Chungkookjang was removed. The slime content and viscosity of Chungkookjang fermented in the mixed culture were similar to those of commercial Chungkookjang when B. subtilis MC31 and Lactobacillus sakei 383 were inoculated in a 1:1 ratio. The maximum GABA content was obtained when Chungkookjang was fermented with B. subtilis MC31 and L. sakei 383, which was fermented at $37^{\circ}C$ for 72 hr. During the period of fermentation, the viable cell number of B. subtilis MC31 reached a peak (log 9.13 CFU/g) at six days, and L. sakei 383 reached a peak (log 6.78 CFU/g) at two days. The moisture, crude ash, crude protein, crude fat, and crude fiber contents were 61.71%, 2.05%, 17.54%, 8.36%, and 1.95%, respectively. The amino-type nitrogen content of Chungkookjang fermented by B. subtilis MC31 and L. sakei 383 was less than Chungkookjang fermented by B. subtilis MC31 alone. The ammonia-type nitrogen and reducing sugar content of the Chungkookjang fermented by B. subtilis MC31 and L. sakei 383 were higher than that of steamed soybean. The glutamic acid and GABA content detected with an amino acid analyzer were 1.40 mg/g and 0.47 mg/g, respectively. These results suggest that fermentation with B. subtilis MC31 and L. sakei 383 in a 1:1 ratio removes more of the foul odor and increases the GABA content compared with single fermentation.

• Restorative Dentistry and Endodontics
• /
• v.32 no.5
• /
• pp.411-418
• /
• 2007

The most scientific and reliable method for deciding the tooth color is the instrumental measurement. However, such color measuring instrument shows the difference of the measuring value according to the diversified measuring condition. This study was conducted to evaluate what effect of the labial surface irregularity of the tooth to the result of the color measured by spectrometer. 11 models of the teeth were made by injecting the A2 shade Luxatemp Automix Plus (DMG, Germany) into the impression acquired from 11 adults. Standard disk samples (15 mm diameter, 7 mm thickness) were made with same material. CIE $L^*a^*b^*$ value was measured at the incisal, central, and gingival area of the central incisor, lateral incisor, canine and first premolar using Specbos 2100 (JETI, Germany) spectrometer. Color difference was calculated between labial surface and standard samples. Among all models of the teeth, $L^*\;and\;b^*$ value showed the reducing tendency as they go toward the gingival area, but $a^*$ value showed the increasing tendency. Color difference between model teeth and standard samples showed the most difference at the incisal area, but the gingival area showed the least difference. And the canine showed the least color difference from the comparison of standard sample, and the central incisor showed the highest difference (p < 0.01). Although the visually detectable difference of the measuring value showed notably depending on the type and measured area (p < 0.05), $L^*\;and\;a^*$ value showed notable differences depending more on the measured areas than on the type of the teeth.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.3
• /
• pp.153-162
• /
• 2016

We investigated the physicochemical properties and starch structure of various rice varieties including 15 colored cultivars. NKHC showed the highest level of protein, lipid, and total dietary fiber levels. Reddish brown rice showed higher lipid content than that in black rice cultivars. Apparent amylose content of waxy and non-waxy colored rice varieties was within the range of 3~5% and 15~18%, respectively. IP exhibited the highest total starch (TS) content, whereas, NKHC and HJJ showed lower TS content than that in other cultivars. Pasting temperature of all colored rice cultivars, except IP, was about $68^{\circ}C$. Peak viscosity of IP, JJJ, Hong, and GGHM showed high values of 138, 130, 128, and 124, respectively. All the colored rice cultivars presented A-type X-ray diffraction pattern and polygonal shapes of starch granules were observed using scanning electron micrographs (SEM). Major groups of amylopectin chain lengths were B (12 < DP ${\leq}$ 24) and A (DP ${\leq}$ 12). SMHC showed the highest B chain content and the lowest A chain content (P < 0.05). These experimental results provided useful information for scientists and the food industry regarding colored rice starches.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.4
• /
• pp.10-39
• /
• 1988

This study investigated the temperatures and relative humidities in the semi-greenhouse type solar dryer with a black rock-bed heat storage and without heat storage and outdoor temperature and relative humidity at 9 a.m. and 2 p.m.. A comparison was made of the drying rates, final moisture contents, moisture content distributions, casehardening stresses, drying defects, volumetric shrinkage of dried lumber for solar- and air-drying from the green condition of mixtures of Douglas-fir, lauan, taun, oak and sycamore 25mm- and 50 mm-thick lumber during the same period for four seasons, and heat efficiencies for solar dryer with and without the heat storage for saving of heat energy and the cost of lumber drying using the solar energy. The results from this study were summarized as follows: I. The mean weekly temperatures in the solar dryers were 3 to $6^{\circ}C$ at 9 a.m. and 9 to $13^{\circ}C$ at 2 p.m. higher than mean outdoor temperature during all the drying period. 2. The mean weekly relative humidities in the solar dryers were about 1 to 19% at 9 a.m. higher than the outdoor relative humidity. and the difference between indoor and outdoor relative humidity in the morning was greater than in the afternoon. 3. The temperatures and relative humidities in the solar dryer with and without the heat storage were nearly same. 4. The overall solar insolation during the spring months was highest and then was greater in the order of summer, atumm, and winter month. S. The initial rate of solar drying was more rapid than that of air drying. As moisture content decreased, solar drying rate became more rapid than that of air drying. The rates of solar drying with and without heat storage were nearly same. The drying rate of Douglas-fir was fastest and then faster in the order of sycamore, lauan, taun and oak. and the faster drying rate of species, the smaller differences of drying rates between thicknesses of lumber. The drying rates were fastest in the summer and slowest in the winter. The rates of solar drying during the spring were more slowly in the early stage and faster in the later stage than those during the autumn. 6. The final moisture contents were above 15% for 25mm-thick air dried and about 10% for solar dried lumber, but the mean final MCs for 50mm-thick lumber were much higher than those of thin lumber. The differences of final MC between upper and lower course of pile for solar drying were greater than those of pile for air drying. The differences of moisture content between the shell and the core of air dried lumbers were greater than those of solar dried lumber, smallest in the drying during summer and greatest in the drying during winter among seasons. 7. Casehardening stresses of 25mm- and 50mm-thick dried lumber were slight, casehardening stress of solar dried lumber was severer than that of air dried lumber and was similar between solar dried lumber with and without heat storage, Casehardening stresses of lumber dried during spring were slightest and then slighter in the order of summer, autumn, and winter. Casehardening stresses of Douglas -fir, sycamore and lauan were slight, comparing with those of taun and oak. 8. Maximum initial checks of 25mm-thick lumber occurred above and below fiber saturation point and those of 50mm-thick lumber occurred in the higher moisture content than thin lumber. As the moisture content decreased, most of checks were closed and didn't show distinct difference of the degree of checks among drying methods. The degree of checks were very slight in case of Douglas-fir and lauan, and severe in case of taun and oak. The degree of checks for 50mm-thick lumber were severer than those for 25mm-thick lumber. 9. The degree of warpage showed severe in case of oak and sycamore lumber, but no warping was found in case of Douglas-fir, lauan and taun. 10. The volumetric shrinkages of taun and oak were large and medium in case of Douglas-fir, lauan and sycamore. 11. Heat efficiencies of solar dryer with heat storage were 6.9% during spring, 7.7% during summer, 12.1% during autumn and 4.1% during winter season. Heat efficiency of solar dryer with heat storage was slightly greater than that of without heat storage. As moisture content of lumber decreased, heat efficiency decreased.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.28 no.2
• /
• pp.99-106
• /
• 2008

This experiment was carried out to show a reform measures by grouping for problems by the survey of TMR plants. Twenty total mixed ration (TMR) plants (10 cooperation and 10 private plants) were surveyed, of which 13 plants, 65% of total TMR plants, committed TMR formulae to a outside nutrition specialist (TMR formulator). With respect to consulting fee for TMR formulae, $500{\sim}900$ thousands Won was paid monthly. On the basis of dry matter 1kg, the prices of TMR products were $325.6{\sim}347.0$Won, whereas those of wet TMR products $365.7{\sim}375.0$Won, which was appeared to be factors to increase management cost. And also, because the TMR plants did not provide TDN (total digestible nutrient) value on their products, nutritional balance feeding for cows could not be managed in farms. It was calculated, based on ADF (acid detergent fiber) value, that TDN value in dry type TMR was 63.0% and 73.2% fur private and cooperation TMR plants, respectively and that the corresponding figure in wet type TMR was 64.9% and 67.2%. According to TMR plant employee's opinion, a prier items to enlarge TMR utilization were TMR education, TMR advertisement, and improvement of ability to make TMR formula. Therefore, for the purpose of further development of TMR, special education of persons related to TMR should be supported.

• Journal of Acupuncture Research
• /
• v.22 no.1
• /
• pp.131-144
• /
• 2005

Objective : The aim of this study is to observe the effect of Herbal-acupuncture(HA) with Luffae Fructus Retinervus Herbal-Acupuncture Solution(LFR-HAS) at ST36(Joksamni) on Collagen Ⅱ -induced arthritis(CIA) in mice. Methods : DBA1/J mice were immunized with bovine type Ⅱ collagen(CⅡ) on days 0 and 21 to induce an arthritis. The mice were divided into 5 groups. They were Normal group(wild type), Control group(CIA), Saline group(CIA +saline injection), Needle Prick group(CIA +single Prick with an injection needle) and LFR-HA group(CIA +LFR-HA treatment). The saline injection, needle prick and LFR-HA were made on the right ST36(Joksamni) of mice for 5 weeks, 3 times a week beginning 4 weeks after the booster immunization. Results : 1. The highest synovial rate of lung fibroblasts was measured in the 1% LFR-HAS. 2. TNF-${\alpha}$ expression of survival cells from CIA mouse joint was significantly reduced in the 1% LFR-HAS. 3. The incidence of arthritis and the spleen weight of CIA mouse were significantly reduced by the Luffae Fructus Retinervus Herbal-Acupuncture (LFR-HA) at ST36. 4. The concentrations of IL-6, INF-${\alpha}$, INF-${\alpha}$, IgG, IgM, and anti-collagen Ⅱ in the CIA mouse serum were significantly reduced by the LFR-HA at ST36. 5. The histological examination showed that, in the LFR-HA group, the cartilage destruction and the synoviocyte proliferation in the CIA mouse joint were not significant compared to the control group, and the collagen fiber was similarly expressed as the normal group. 6. In the LFR-HA group, the ratio of CD3e+ to CD19+ cell, and the ratio of CD4+ to CD8+ cell in the lymph node were similarly maintained as those of the normal group. 7. CD69+/CD3e+ and CD11a+/CD19+ cells in the CIA mouse lymph node were significantly reduced by the LFR-HA at ST36. 8. CD11b+/Gr-1+ cells in the CIA mouse joint were significantly reduced by the LFR-HA at ST36. Conclusions : These results indicate that Luffae Fructus Retinervus Herbal-Acupuncture (LFR-HA) at ST36 may regulate the immune system and have a therapeutic effect on Collagen-induced arthritis(CIA) in mice.