• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.28-33
• /
• 2004

We developed a fiber-optic CT for large current monitoring in power systems. We used a FRG fiber sensor coil to suppress CT output degradation caused by linear birefringence, and different optical sources were used to compare their noise characteristics. From the experiments, we obtained output variation less than $\pm$0.4(%) when the sensor coil suffered mechanical perturbations, and the ASE source showed -23(㏈) less noise in the output than singlemode laser diode.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.5
• /
• pp.34-42
• /
• 1993

Due to the low loss, broadband and accurate short time delay properties of optical fiber, it has attracted as a delay medium for high speed and broad-band signal processing. In this paper, we consider the coherent optical fiber filter of lattice structure, which uses coherent light sources and consists of directional couplers and optical fiber delay elements.The differences between the optical fiber filter and the ordinary digital filter are 1) the coupling coefficients of directional couplers are restricted between 0 and 1. 2) the optical signal is divided into ${j\sqrt{a}}and\;{j\sqrt{1-a}}$ at the directional coupler. Considering these restrictions, the design formulae and condition of realibility for optical fiber filter of lattice structure which makes the optimal use of optical signal energy are derived.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.1
• /
• pp.151-157
• /
• 1992

An experiment was conducted to investigate effects of fiber source on growth performance, N and neutral detergent fiber (NDF) digestibility, and utilization of energy in chicks fed an isocaloric low-energy diet from 7 to 21 days of age. Two fiber sources, cellulose and corn dietary fiber (CDF), were included in a diet at 10, 20 and 30% at the expense of kaolin, an inert diluent. The CDF contained 76.5% NDF consisting mainly of hemicellulose. The results showed that growth performance, N and NDF digestibility, dietary DE and ME values, energy deposition, and NE for production in birds fed CDF were inferior to those in birds fed cellulose. It can be concluded, from the present study, that chicks can utilize cellulose more efficiently than CDF up to a level of 30%.

• Asian-Australasian Journal of Animal Sciences
• /
• v.4 no.2
• /
• pp.169-176
• /
• 1991

Four fibrous feedstuffs from alfalfa meal (AFM), cassava leaf meal (CLM), rubber seed meal (RSM) and leucaena meal (LM) were included in semi-purified diets for growing pig (45 kg body wt.) at 20%, to investigate the effects of these fiber sources and fractions on amino acid digestibility. Cellulose (C), a purified fiber source was included in another diet at 5% level for comparison. The barrows fitted with ileal T-cannula were used in the digestion trials with latin square design. The digestibilities of amino acids were measured at both terminal ileum and fecal level. NDF and hemicellulose content were the highest in AFM-diet whereas LM-diet had the highest ADF and lignin content. RSM-diet contained the highest crude fiber and cellulose content. The digestibilities of amino acids at ileal level were found the highest with CLM-diet, while LM-diet was the least. At fecal level, control diet and CLM-diet were the highest in amino acid digestibility while AFM-diet was the least. The digestibility of amino acids was higher at ileal than fecal level. The digestibility of arginine was not affected with fiber fractions but was found to be the most disestible across all diets. The most depressed amino acid was methionine at both levels; praline and glycine, in the dispensable amino acid group, were depressed at ileal and fecal level, respectively. Lignin did not depress amino acid digestibility in general but specifically depressed methionine, histidine, isoleucine and threonine digestibility. Cellulose content did not affect amino acid digestibility but undesirable factors might be responsible.

• Fibers and Polymers
• /
• v.5 no.1
• /
• pp.31-38
• /
• 2004

In the present paper, a variety of fiber reinforcements, for instance, stabilized OXI-PAN fibers, quasi-carbon fibers, commercial carbon fibers, and their woven fabric forms, have been utilized to fabricate pseudo-unidirectional (pseudo-UD) and 2-directional (2D) phenolic matrix composites using a compression molding method. Prior to fabricating quasi-carbon fiber/phenolic (QC/P) composites, stabilized OXI-PAN fibers and fabrics were heat-treated under low temperature carbonization processes to prepare quasi-carbon fibers and fabrics. The thermal conductivity and thermal expansion/contraction behavior of QC/P composites have been investigated and compared with those of carbon fiber/phenolic (C/P) and stabilized fiber/phenolic composites. Also, the chemical compositions of the fibers used have been characterized. The results suggest that use of proper quasi-carbonization process may control effectively not only the chemical compositions of resulting quasi-carbon fibers but also the thermal conductivity and thermal expansion behavior of quasi-carbon fibers/phenolic composites in the intermediate range between stabilized PAN fiber- and carbon fiber-reinforced phenolic composites.

• Transactions of the Society of Information Storage Systems
• /
• v.7 no.2
• /
• pp.53-59
• /
• 2011

We have developed a compact and high-power mode-locked fiber laser for multilayered optical memory. Fiber lasers have the potential to be compact and stable light sources that can replace bulk solid-state lasers. To generate high-power pulses, we used stretched-pulse mode locking. The average power and pulse width of the output pulse from the fiber laser that we developed were 109 mW and 2.1 ps, respectively. The dispersion of the output pulse was compensated with an external single-mode fiber of 2.5 m length. The pulse was compressed from 2.1 ps to 93 fs by dispersion compensation. The fiber laser we have developed is possible to use as a light source of multilayered optical memory. We also present a fiber confocal microscope as an alignment-free readout system of multilayered optical memories. The fiber confocal microscope does not require fine pinhole position alignment because the fiber core is used as the point light source and the pinhole, and both of which are always located at the conjugated point. The configuration reduces the required accuracy of pinhole position alignment. With these techniques we can present an all-fiber recording and readout system for multilayered memories.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.3
• /
• pp.27-35
• /
• 2001

Four different sources of wood-fibers from Eucalyptus, Italian poplar, hemlock, and mixed species fibers were used to study the influence of their fiber characteristics on the performance of medium density fiberboard (MDF) panels bonded with both urea-formaldehyde (UF) and phenol-formaldehyde (PF) adhesives. Included fiber characteristics were fiber length, size distribution, bulk density, and acidity. Physical and mechanical properties of MDF panels manufactured by dry process using these different fibers were determined for the comparison of board performance. Two hardwood species had a large fraction of short fibers resulting in a higher bulk density while very long hemlock fibers had lower bulk density. Fiber acidity was revealed to strongly affect the internal bond (IB) strength of MDF panels bonded with UF resins. MDF panels made from mixed species fibers showed highest IB strength of all panels prepared. UF-bonded MDF panels showed poor dimensional stability. In conclusion, the present study showed that wood-fiber characteristics such as fiber length, bulk density, and acidity affect the performance of MDF boards, and also suggested that fiber characteristics be considered for MDF panel manufacture.

• Current Optics and Photonics
• /
• v.4 no.6
• /
• pp.509-515
• /
• 2020

A practical single photon source for fiber-based quantum information processing is still lacking. As a possible 1.55-㎛ quantum-dot single photon source, an InGaAsP/InP-air-aperture micropillar cavity is investigated in terms of fabrication tolerance. By properly modeling the processing uncertainty in layer thickness, layer diameter, surface roughness and the cavity shape distortion, the fabrication imperfection effects on the cavity quality are simulated using a finite-difference time-domain method. It turns out that, the cavity quality is not significantly changing with the processing precision, indicating the robustness against the imperfection of the fabrication processing. Under thickness error of ±2 nm, diameter uncertainty of ±2%, surface roughness of ±2.5 nm, and sidewall inclination of 0.5°, which are all readily available in current material and device fabrication techniques, the cavity quality remains good enough to form highly efficient and coherent 1.55-㎛ single photon sources. It is thus implied that a quantum dot contained InGaAsP/InP-air-aperture micropillar cavity is prospectively a practical candidate for single photon sources applied in a fiber-based quantum information network.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.53-57
• /
• 2004

The stabilization of fiber-optic current sensor has been achieved by using a broadband light source and a Faraday Rotator Glass fiber sensor coil. The very low Photo-elastic constant of the fiber suppressed output variations within ${\pm}0.4[%]$ when mechanical disturbance was applied to the sensor coil. Noise characteristics, with different light sources, have also been analyzed, which experimentally proved that the wider bandwidth source showed the better noise performance.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2000.04a
• /
• pp.93-96
• /
• 2000