• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.2
• /
• pp.196-203
• /
• 2023

We investigated the nutritional characteristics and antioxidant effects of sea mustard Undaria pinnatifida fractions from Gultongmeori in Taejongdae, Youngdo, Busan. Based on dry weight, the moisture, crude protein, crude lipid, crude ash, and crude fiber contents were 34.98%, 11.55%, 0.43%, 17.82%, and 3.45%, respectively. To evaluate the antioxidant effect, we used radical scavenging (DPPH and ABTS), reactive oxygen species (ROS) production measurement, and DNA oxidation assays. Total flavonoid and phenol contents were higher in the n-hexane fraction than in other fractions. The n-hexane fraction was more effective at scavenging free radicals than other fractions as assessed using DPPH and ABTS assays (P<0.05). The ROS production assay showed that all sea mustard fractions decreased H₂O₂ induced cellular ROS production compared to that seen in the control (P<0.05); however, the n-hexane fraction reduced cellular ROS production to a greater extent than the other fractions. Furthermore, the n-hexane fraction from Gultongmeori significantly inhibited genomic DNA oxidation. These results indicate that the antioxidant effect of sea mustard is associated with its high flavonoid and phenol content. This study proposes that processed food products supplemented with sea mustard can be developed as functional foods to promote health in the local population.

• Computers and Concrete
• /
• v.22 no.1
• /
• pp.63-70
• /
• 2018

The steel fiber reinforced concrete (SFRC) shows better performance under dynamic loading than conventional concrete in virtue of its good ductility. In this paper, a series of quasi-static experiments were carried out on the SFRC with volume fractions from 0 to 6%. The compressive strength increases by 38% while the tension strength increases by 106% when the fraction is 6.0%. The contact explosion tests were also performed on the ${\Phi}40{\times}6cm$ circular SFRC slabs of different volume fractions with 20 g RDX charges placed on their surfaces. The volume of spalling pit decreases rapidly with the increase of steel fiber fraction with a decline of 80% when the fraction is 6%, which is same as the crack density. Based on the experimental results, the fitting formulae are given, which can be used to predict individually the change tendencies of the blast crater volume, the spalling pit volume and the crack density in slabs with the increase of the steel fiber fraction. The new formulae of the thickness of damage region are established, whose predictions agree well with our test results and others. This is of great practical significance for experimental investigations and engineering applications.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.8
• /
• pp.1113-1120
• /
• 2000

Productivity, nutrient contents, in vitro gas production and in sacco degradability of different fractions and whole OPF were determined to assess the feeding value of OPF as a ruminant feed. An in vivo digestibility trial was also carried out using goat. Freshly harvested OPF was randomly collected, partitioned and weighed. An OPF from 21 years older palm weighed 13.4 kg and the annual fresh matter yield of petiole, leaflet and midrib was 46.5, 11.8 and 3.4 ton/ha, respectively. Leaflet contained 439, 926, 698, 501, 168, 196, 748 and 52 (g/kg) of dry matter (DM), organic matter (OM), neutral detergent fiber (NDF), acid detergent fiber (ADF), cellulose (CE), hemicellulose (HC), total carbohydrate (TC) and non fiber carbohydrate (NFC), respectively. Petiole contained lower (p<0.01) DM, CP and EE contents than leaflet. Organic matter, CE and TC contents were higher (p<0.01) in petiole compared to leaflet. Silica and lignin contents were highest (p<0.01) in midrib followed by leaflet, whole OPF and least in petiole. The Ca, P, Na, K and Mg contents (g/100 g DM) of leaflet were 0.529, 0.182, 0.039, 0.876, and 0.168, respectively. In vitro DM digestibility (g/100 g) at 48 h of leaflet, petiole and midrib was 32.7, 38.7 and 30.2, respectively. The in sacco DM degradation (g/100 g) at 48 h of leaflet was higher than that of whole OPF, petiole and midrib. The in vivo digestibility of DM, OM, CP and ADF of whole OPF was 52, 56, 43 and 26%, respectively. It can be concluded that leaflet is the most nutritious fraction of OPF and midrib is the least. The nutrient content and digestibility of the whole OPF showed that OPF could be an alternative roughage source for ruminant diets.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.1
• /
• pp.28-34
• /
• 1997

This study was conducted to determine the protein content, cell wall fractions, and mineral concentrations of some minor plant species collected for one year in pastures grazed by goats in the Philippines. An assessment of nutrient variability and a comparison of forage protein and mineral concentrations to the critical value of protein and minerals based on animal needs were also studied. The plant species were the following: grasses(Axonopus compressus, Eleusine indica, Rottboellia exaltata); legumes (Aeschynomene indica, Calopogonium muconoides, Desmodium tortousum); and herbs (Corchorus olitorius, Ipomea aquatica, Sida acuta, Synedrella nodiflora). The two seasons (dry and wet) were subdivided into Dry-1 (December to February, 132 mm total rainfall), Dry-2 (March to May, 25 mm total rainfall), Wet-1 (June to August, 1,138 mm total rainfall), and Wet-2 (September to November, 1,118 mm total rainfall). Results showed that significant differences were obtained on various nutrient fractions including those mineral concentrations across species. Across season, acid detergent lignin (ADL) had higher (p < 0.05) value at Dry-1. Legumes and herbs were higher in crude protein (CP) especially Sida acuta. Grasses showed the highest neutral detergent fiber (NDF) and acid detergent fiber (ADF) with the addition of Sida nodiflora (herb) for it contained high NDF. Aeschynomene indica contained the highest amount of ADL and the herbs (Ipomea aquatica and Sida acuta) had exceptionally high concentration of minerals. Coefficient variation of the various nutrient values ranged from 27.3 to 136.7%. Some forage minerals appeared to be deficient (sodium, phosphorus and copper) or excess (molybdenum) for the whole or part of the year. This study shows that some minor plant species could extend the range of concentration of some nutrients (i.e., CP and minerals) beyond that normally found in conventional pasture species.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.2
• /
• pp.139-147
• /
• 1996

Eight Philoppine forages were studied to obtain the following: 1) nutrient concentrations and digestibility, 2) distribution of the various minerals in fiber fractions through mineral analyses of neutral detergent fiber(NDF) and acid detergent fiber(ADF) residues, and 3) correlation coefficients among the factors affecting forage quality and mineral concentrations. These Philippine forages were paragrass [Brachiaria mutica (Forsk.) Stapf], stargrass (Cynodon plectostachyum Pilger), napiergrass (Pennisetum purpureum Schumach.) calopo (Calopogonium muconoides Desv.), centrocema (Centrocema pubescens Benth.), gliricidia [Gliricidia sepium (Jacq.) Walp.] leucaena [Leucaena leucocephala (Lam.) de Wit.] and sesbania [Sesbania grandiflora (L.) Poir]. Species differences(p<0.01) were observed on various nutrient fractions including mineral composition and digestibility. The cell wall(NDF) fraction, prepared by boiling in neutral detergent solution, contained the following proportions of the total mineral originally present (%): calcium (Ca), 0.7; phosphorus(P), 14.3; magnesium(Mg), 1.9; potassium(K), 3.7; copper(Cu), 16.4; zinc(Zn), 2.9; molybdenum(Mo), 9.3; cobalt(Co), 16.2; manganese(Mn), 5.6, and iron(Fe), 81.3. The ligno-cellulose(ADF) fraction, prepared by boiling in acid detergent solution, contained the following proportions of the total mineral originally present(%): Ca, 0.2; P, 4.4; Mg, 0.7; K, 2.8; Cu, 32.3; Zn, 1.1; Mo, 8.9; Co, 4.7; Mn, 5.4; and Fe, 36.8. Correlation coefficients among the factors affection forage quality and mineral concentrations were also observed. Evidently, 75 and 45% of the minerals in grasses and legumes was positively correlated to CP and IVDMD, respectively. Moreover, 55, 80 and 75% of the forage minerals was negatively correlated to NDF, ADF and ADL fraction, respetively, implying that most of the minerals reside in the non-structural cell components.

• Journal of the Korean Society of Safety
• /
• v.20 no.2 s.70
• /
• pp.26-31
• /
• 2005

The strong continuous fiber reinforced metal matrix composites (MMCs) are recently used in aerospace and transportation applications as an advanced material due to its high strength and light weight. Unidirectional fiber-metal matrix composites have superior mechanical properties along the longitudinal direction. However, the applicability of continuous fiber reinforced MMCs is somewhat limited due to their relatively poor transverse properties. Therefore, the transverse properties of MMCs are significantly influenced by the properties of the fiber/matrix interface. In order to be able to utilize these MMCs effectively and with safety, it must be determined their elastic plastic behaviors at the interface. In this study, the interfacial stress states of transversely loaded unidirectional fiber reinforced metal matrix composites investigated by using elastic-plastic finite element analysis. Different fiber volume fractions $(5-60\%)$ were studied numerically. The interlace was treated as three thin layer (with different properties) with a finite thickness between the fiber and the matrix. The fiber is modeled as transversely isotropic linear-elastic, and the matrix as isotropic elastic-plastic material. Using proposed model, the effects of the interface region and fiber arrangement in MMCs on the distributions of stress and strain are evaluated. The stress distributions of a thin multi layer interface have much less changes compared with conventional perfect interface. The analyses were based on a two-dimensional generalized plane strain model of a cross-section of an unidirectional composite by the ANSYS finite element analysis code.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.1
• /
• pp.51-56
• /
• 1996

In this Experiment three wether male Matou goats (♂), all fitted with permanent rumen fistulae, were used to study the rumen degradabilities (incubation time 48h) of dry matter (DM), neutral detergent fibre (NDF), acid detergent fibre (ADF), acid detergent ligin (ADL), cellulose (CEL) and hemicellulose (HC) and their contents of wheat and rice straws were determined for the different morphological fractions and segments. The results showed that the variation of different fractions for wheat and rice straw is the true resources of their nutritive value variation and the cell wall contents of wheat and rice straw are also obviously different. The rumen degradabilities of different straw fibre are significantly different (p<0.01), mean while the effect of straw variety is also significant (p<0.05). The aim was to set up a foundation for studying the rumen degradation of the roughage resources.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2A
• /
• pp.105-113
• /
• 2011

This study evaluated the effects of fibers on the mechanical properties and chemical solution resistance of porous concrete with fiber type (jute, pulp, PVA and nylon fiber) and fiber volume fraction (0.0%, 0.1%, 0.2%, 0.3%). The tests that were carried out to analysis the properties of porous concrete included compressive strength, void ratio, pH value, and chemical solution exposure with varying type and volume fraction of fiber were conducted. The type and volume fraction of fiber also affected the void ratio, compressive strength, flexural strength and chemical solution exposure. Increased volume fractions of fiber resulted in improved properties of the compressive strength, flexural strength and void ratio. However, the difference between the measured pH value and chemical resistance of porous concrete with fiber type and volume fraction was not significant.

• Resources Recycling
• /
• v.24 no.3
• /
• pp.66-75
• /
• 2015

The flexural performance of amorphous steel fibers having environmental and economy benefits due to relatively short manufacturing process were evaluated as well as that of hooked steel fibers by varing fiber length and volume fraction. Fiber lengths were 10 mm, 20 mm, 30 mm and fiber volume fractions were varied from 0.3% to 1.2%. Test results with flexural performance showed that mixing design needs to be careful because of relatively high volume of amorphous steel fiber compared to hooked steel fibers. High flexural strength was obtained from both longer fiber length and higher volume fraction. Residual strength and toughness of amorphous steel fiber were similar to that of hooked steel fiber, even though rapid dropping of applied load right after concrete matrix breaking. It can be judged that relatively high ability of energy dissipation around first cracking area relatively overcome rapid dropping of loading.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.1 s.256
• /
• pp.89-96
• /
• 2007

A volume integral equation method (VIEM) is applied for the effective analysis of plane elastostatic problems in unbounded solids containing single isotropic inclusion of two different shapes considering composite fiber volume fraction. Single cylindrical inclusion and single square cylindrical inclusion are considered in the composites with six different fiber volume fractions (0.25, 0.30, 0.35, 0.40, 0.45, 0.50). Using the rule of mixtures, the effective material properties are calculated according to the corresponding composite fiber volume fraction. The analysis of plane elastostatic problems in the unbounded effective material containing single fiber that covers an area corresponding to the composite fiber volume fraction in the bounded matrix material are carried out. Thus, single fiber, matrix material with a finite region, and the unbounded effective material are used in the VIEM models for the plane elastostatic analysis. A detailed analysis of stress field at the interface between the matrix and the inclusion is carried out for single cylindrical or square cylindrical inclusion. Next, the stress field is compared to that at the interface between the matrix and the single inclusion in unbounded isotropic matrix with single isotropic cylindrical or square cylindrical inclusion. This new method can also be applied to general two-dimensional elastodynamic and elastostatic problems with arbitrary shapes and number of inclusions. Through the analysis of plane elastostatic problems, it will be established that this new method is very accurate and effective for solving plane elastic problems in unbounded solids containing inclusions considering composite fiber volume fraction.