• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.10B
• /
• pp.1343-1352
• /
• 2001

DWDM 전송 시스템에서 전송 용량 증대를 위하여 bit rate를 고속화하고 채널 간격을 줄이기 위해서는 전송로로 사용되는 광케이블의 분산특성이 상반되는 값을 갖도록 요구된다. 즉, 분산으로 인한 신호 왜곡을 줄이기 위해서는 광케이블의 분산이 작아야 하고, 비선형 현상을 억제하기 위해서는 분산이 커야 한다. 이러한 두 가지 상반된 분산 penalty를 동시에 해결하기 위한 방안으로 양과 음의 분산 값이 이산적으로 분포된 광섬유 케이블을 최초로 설계 및 제작하였다. 이러한 분산 분포 케이블을 위해 일반 단일 모드 광섬유(SMF)와 대응되는 음분산 값을 갖는 새로운 광섬유(NDF)를 설계 및 제조한 후, SMF의 +17 ps/km/nm 및 NDF의 -15 ps/km/nm의 분산영역이 6km의 케이블 내에 분포되도록 케이블을 제작하였다. 새롭게 개발된 케이블의 분산 값을 국지적으로는 높은 값을 가지면서도 전체적으로는 1.0 ps/km/nm의 평균 분산 값으로 NZSDF 대비 30% 이하를 가질 수 있음을 확인하였다. 또한, 제안된 케이블은 SMF 케이블과 동일한 케이블 시공 운용 환경에서도 정합함을 확인하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.3
• /
• pp.567-571
• /
• 2012

To design the long-haul optical communication system, we need to decide the type of optical fiber and optical amplifier, span length of optical amplifier, dispersion compensation method, optical signal power, etc. Therefore, we need to predict the performance of optical communication system when we change one of the system parameters. In this paper, we investigate the method of predicting the maximum transmission length of the designed optical communication system and finding the optimum optical signal power to obtain the maximum transmission length.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.6
• /
• pp.92-98
• /
• 1998

The transform limited optical short pulses are generated by compression of pulses from a gain switched distributed feedback laser at 5 GHz repetition rate. The gain-switched pulses have the minimum pulse width of 27 psec with the spectral width of 1.1 nm. Thus the output pulses have a large amount of linear chirp and nonlinear chirp. We suppress the nonlinear chirp by passing the pulses through the optical band pass filter with 3 dB band width of 0.55 nm which is narrower than spectral width of the input pulses and generate 7.1 psec pulses by compressing the output with the dispersion compensating fiber. The pulses have time-bandwidth product of 0.49 which is close to the transform limited gaussian pulse. These pulses can be utilized as optical sources in 40 Gbit/s time division multiplexed optical transmission system.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2637-2643
• /
• 2010

In order to develop a new line injection system for spin draw yarn (FD SDY) fibers, the effect of various parameters in extrusion and melt line conditions on the dispersion and distribution of $TiO_2$ particles within FD PET fibers was investigated. As a result, the dispersibility of $TiO_2$ particles in a PET matrix is found to depend on the particle size and its surface characteristics. Surface modification of $TiO_2$ by dimethyl polysiloxane resulted in the improved dispersibility and affinity of $TiO_2$ particles in the PET matrix. Especially, residence time, mixing temperature, and mixing shear rate in the new line injection system under the SDY spinning process were very important parameters to minimize the agglomeration of $TiO_2$ particles. The FD SDY prepared by the new line injection system was superior to those using the polymerization process and the conventional masterbatch chip dosing process in the color-L and color-b values of the fibers.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.57.4-58
• /
• 2018

We explore the role of various environments in triggering star formation (SF) and narrow-line active galactic nucleus (AGN) in SDSS spiral galaxies and the SF-AGN connection, using a volume-limited sample with $M_r$ < -19.5 and 0.02 < z < 0.055 selected from the SDSS Release 7. To avoid the dependency of AGN activity on bulge mass, the central velocity dispersion of the sample galaxies is limited to have a narrow range of $130{\leq}{\sigma}{\leq}200km\;s^{-1}$. We note that in gas sufficient galaxies, AGN feeding lags behind starburst, whereas as the gas exhausts, the SF slows down and AGN seems to even prevent the SF, and thus divide the high-${\sigma}$ sample into two subsamples according to their cold gas content at central region traced by fiber star formation rate, $SFR_{fib}$. We find that a high density (cluster) environment causes a significant increase in AGN activity as well as gas depletion in host galaxies. However, the finding is only noticeable in the high-${\sigma}$ and low $SFR_{fib}$ sample. It seems that a galaxy interaction with the nearest neighbor directly affects the SF of the central region. However, it is unclear whether it directly affects AGN activity.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.4
• /
• pp.22-30
• /
• 1992

The propagation of coherent time-harmonic elastic SH waves in a medium with random distribution of cylindrical inclusions is studied for characterizing the dynamic elastic modulus and the attenuation property of fiber-reinforced composite materials. A multiple scattering theory using the single scattering coefficients in conjunction with the Lax's quasicrystalline approximation is derived and from which the dispersion relation for such medium is obtained. The pair-correlation functions between the cylinders which are needed to formulate the multiple scattering interaction between the cylinders are obtained by Monte Carlo simulation method.From the numerically calculated complex wavenumbers, the propagation speed of the average wave, the coherent attenuation coefficient and the effective shear modulus are presented as functions of frequency and area density.

• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.109-120
• /
• 2005

In this paper, bit error rate (BER) characteristics, sensitivity and minimum allowable launching power are numerically investigated as a function of amplifier spacing that consisted of 1,200 km WDM systems with MSSI method. It is conformed that the sensitivity and minimum allowable launching power are gradually degraded as amplifier spacings are gradually expanded, but those are not largely affected by modulation format. The sensitivity of RZ transmission system is smaller than that of NRZ transmission system, but minimum allowable launching power of NRZ transmission system is smaller than that of RZ transmission system. And, it is confirmed that the best amplifier spacing in NRZ and RZ transmission system is less than 50 km, because the sensitivity and minimum allowable launching power are less affected by fiber dispersion, channel wavelength and pump light power.

• Composites Research
• /
• v.17 no.3
• /
• pp.38-44
• /
• 2004

The electromagnetic interference (EMI) shielding is very essential for commercial and military purposes. We fabricated multi-walled carbon nanotube (MWNT)/epoxy composites and studied the electromagnetic characteristics of the composites before we study the characteristics of MWNT-added glass fiber-reinforced composites. After setting up the fabrication process, we measured the permittivity of MWNT/epoxy composites with process variables and MWNT concentrations in X-band (8.2GHz~12.4GHz). We also observed re-aggregation phenomenon of MWNTs and investigated its effect on the permittivity. The permittivity of the composites was influenced by the degree of dispersion of MWNTs and increased almost linearly as MWNT concentration increases.

• Korean Journal of Materials Research
• /
• v.11 no.5
• /
• pp.354-360
• /
• 2001

By applying Eshelby's theory on the'transformation' and' inhomogeneity'problems of an ellipsoidal inclusion, a microscopic stress-strain is formulated for a composite material consisting of a matrix and a large number of aligned ellipsoidal inclusions. Some of the composites of practical interest, such as unidirectionally fiber- reinforced, Particle dispersion strengthened and layered composites can be treated by changing the axial ratios of the ellipsoidal inclusion. The macroscopic stress-strain relation obtained is applicable to elastic and elasto-plastic deformation of the composite in uniform loading.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.05a
• /
• pp.247-257
• /
• 2004

Electrodes were fabricated based on activated carbon powder BP-20, conducting agent such as Super P, vapor grown carbon fiber (VGCF) and acetylene black (AB), and the mixed binders of flexible poly(vinylidenefluoridehexafluoropropylene) [P(VdF-co-HFP)] and cross linking dispersion agent of polyvinylpyrrolidone (PVP) to increase mechanical strength. According to impedance measurement of the electrode with the addition of conducting agent, we found that it was possible to charge rapidly by the fast steady-state current convergence due to low equivalent series resistance (AC-ESR, fast charge transfer rate at interface between electrode and electrolyte and low RC time constant. The self-discharge of unit cell showed that diffusion process was controlled by the ion concentration difference of initial electrolyte due to the characteristics of Electric Double Layer Capacitor (EDLC) charged by ion adsorption in the beginning, but this by current leakage through the double-layer at the electrode/electrolyte interface had a minor effect and voltages of curves were remained constant regardless of electrode material. We found that the 2.3V/230F grade EDLC would be applied to industrial safety usage such as uninterrupted power supply (UPS) because of the constant DC-ESR by IR drop regardless of discharge current.