• 한국통신학회논문지
• /
• 제17권1호
• /
• pp.68-79
• /
• 1992

고속 아날로그 시스템,위성통신시스템, video signal processing 및 processing 및 optical fiber interface 회로등에서 높은 전자이동도로 인하여 고주파 툭성이 우수한 GaAs 연산 증폭기는 필수적인 구성 요소이다. 하지만, 낮은 전달컨덕턱스 및 low frequency dispersion등의 현상 때문에 높은 전압이득을 얻을 수 없다는 단점을 가지고 있다. 따라서 본 논문에서는 GaAs MESFETfmf 이용한 증폭기의 이득을 증가시키기 위한 기법을 비교분석하고 기존의 전류미러와 새로운 구성의 전류 미러를 설계하여 회로의 안정화를 꾀하였다. 높은 차동전압이득을 얻기 위하여 단일 증폭기의 bootstrap 이득증가기법을 이용하여 차종입력 회로를 구성하였으며, 회로의 안정도 및 우수한 주파수 특성을 얻기 위하여 common mode feedback을 사용하였다. Pspice를 통한 시뮬레이션 결과 설계된 회로의 이득이 18.6dB 향상되었고 안정도 및 주파수 특성면에서 우수함을 확인할 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.93-96
• /
• 2009

This study is to examine a change of quality and a material performance of fiber reinforced cement composite for mass production. It is necessary to make Strain-hardening cementitious composite(SHCC) by batcher plant for ready-mixed concrete and use the performance of SHCC which made based on laboratory level. This study makes a comparative performance of press and mechanics that is the property of Strain-hardening by direct tension. In case of making by batcher plant. This experiment has demonstrated that even if it takes long after being mixed small and compared with the one which made based on laboratory, it has a tendency to be dissatisfied with fiver's dispersion and lower its performance of Strain-hardening. The reason why the material performance of SHCC for mass production went down is through SHCC that mixed sometimes matrix's viscosity and fiber's dispersion.

• 한국전기전자재료학회논문지
• /
• 제20권7호
• /
• pp.587-593
• /
• 2007

Oil-based nanofluids were prepared by dispersing spherical and fiber shaped $Al_2O_3$ and AlN nanoparticles in transformer oil. Two hydrophobic surface modification processes using oleic acid (OA) and polyoxyethylene alkyl acid ester (PAAE) were compared in this study. The dispersion stability, viscosity and breakdown voltage of the nanofluids were also characterized. $(Al_2O_3+AlN)$ mixed nanofluid was prepared to take an advantage of the excellent thermal conductivity of AlN and a good convective heat transfer property of fiber shaped $Al_2O_3$. For $(Al_2O_3+AlN)$ particles with 1 % volume fraction in oil, the enhancement of thermal conductivity and convective heat transfer coefficient was nearly 11 % and 30 %, respectively, compared to pure transformer oil. The nanofluid, containing $Al_2O_3+AlN$, successfully lowered the temperature of the heating element and oil itself during a natural convection test using a prototype transformer.

• 한국입자에어로졸학회지
• /
• 제9권4호
• /
• pp.231-238
• /
• 2013

Carbon nanotubes (CNTs) are one of the nanomaterials that were discovered by Iijima in 1991 for the first time. CNTs have long cylindrical and axi-symmetric structures. CNTs are made by rolling graphene sheets. Because of their large length-to-diameter ratio, they are called nanotubes. CNTs are categorized as single-walled carbon nanotubes (SWCNTs) or multi-walled carbon nanotubes (MWCNTs) based on the shell structures. CNTs are broadly used in various fields, such as scanning probe microscopy, ultra fine nano balance and medicine, due to their extraordinary thermal conductivity, electrical and mechanical properties. Because long, straight CNTs have the same shape as asbestos, which cause cancer in cells lining the lung, there have been many studies on the effects of MWCNTs on human health that have been conducted. Stable atomization of CNTs is very important for the estimation of inhalation toxicity. In the present study, electro-static assisted axial atomizer (EAAA), which is the instrument that uses MWCNTs and aerosolizes them by transforming the single fiber shape using ultrasonic dispersion and electric field, was invented. EAAA consists of a ultrasonic bath for dispersion of MWCNTs and a particle generator for atomizing single fibers. The performance evaluation was conducted in order to assess the possibilities of 6-hour straight atomization with stability, which is the suggested exposure time in a day for the estimation of inhalation toxicity.

• 한국항행학회논문지
• /
• 제11권1호
• /
• pp.50-58
• /
• 2007

본 논문에서는 장거리 다채널 광 전송 시스템에서 MSSI(Mid-Span Spectral Inversion) 기술의 유용성을 확장하기 위하여 1,000 km의 비영 분산 천이 광섬유로 구성된 $16{\times}40$ Gbps WDM 시스템에서 광 위상 공액기 (OPC ; Optical Phase Conjugator)의 최적 위치와 광섬유 구간의 최적 분산 계수를 도출한다. 유도된 이들 최적 파라미터들을 WDM 시스템에 적용하면 전통적인 MSSI 기술이 적용된 WDM 시스템에 비해 모든 채널의 보상 정도를 매우 크게 개선할 수 있는 것을 확인하였다. 따라서 제안된 최적 파라미터들은 OPC를 다채널 WDM에 적용하는데 있어 형성하지 못하면 심각한 문제를 발생시키는 OPC에 대해 광 전력과 국부 분산량을 대칭화시키는 방법을 대체할 것으로 기대된다. 본 논문에서 제안한 방법을 실제 WDM 시스템에 적용함으로써 유연한 시스템 설계가 가능할 것이다.

• 한국정보통신학회논문지
• /
• 제9권5호
• /
• pp.1123-1131
• /
• 2005

장거리 $8{\times}40$ Gbps 파장 분할 다중 시스템에서 색 분산과 자기 위상 변조에 의해 왜곡된 광 펄스를 최상으로 보상할 수 있는 최적의 광 위상 공액기 (OPC ; Optical Phase Conjugator)의 위치를 수치적 방법으로 살펴보았고, 이 위치에서의 전체 채널의 눈 열림 패널티 (EOP ; Eye Opening Penalty)와 비트 에러율 (BER ; Bit Error Rate) 특성을 OPC가 전체 전송 거리의 중간에 위치한 경우 (MSSI ; Mis-Span Spectral Inversion)와 비교해 살펴보았다. 먼저 OPC를 이용해 왜곡된 광 신호를 보상하는 WDM 시스템에서 모든 채널의 최상의 보상을 수행하기 위해서는 전송하고자 하는 변조 파형의 형식과 광섬유 분산 계수와 관련하여 OPC의 위치가 전체 전송 거리의 중간이 아닌 다른 곳으로 이동되어야만 하는 것을 확인할 수 있었다. 아울러 최적 OPC 위치를 갖는 WDM 시스템을 이용한 경우 수신측에서의 광 신호의 EOP 특성은 채널에 따라 다소 차이가 있을 수 있지만, BER 특성은 거의 동일하다는 것을 확인할 수 있었다.

• 접착 및 계면
• /
• 제3권4호
• /
• pp.44-52
• /
• 2002

Composite materials are created by combining two or more component to achieve desired properties which could not be obtained with the separate components. The use of reinforcing fillers, which can reduce material costs and improve certain properties, is increasing in thermoplastic polymer composites. Currently, various inorganic fillers such as talc, mica, clay, glass fiber and calcium carbonate are being incorporated into thermoplastic composites. Nevertheless, lignocellulose fibers have drawn attention due to their abundant availability, low cost and renewable nature. In recent, interest has grown in composites made from lignocellulose fiber in thermoplastic polymer matrices, particularly for low cost/high volume applications. In addition to high specific properties, lignocellulose fibers offer a number of benefits for lignocellulose fiber/thermoplastic polymer composites. These include low hardness, which minimize abrasion of the equipment during processing, relatively low density, biodegradability, and low cost on a unit-volume basis. In spite of the advantage mentioned above, the use of lignocellulose fibers in thermoplastic polymer composites has been plagued by difficulties in obtaining good dispersion and strong interfacial adhesion because lignocellulose fiber is hydrophilic and thermoplastic polymer is hydrophobic. The application of lignocellulose fibers as reinforcements in composite materials requires, just as for glass-fiber reinforced composites, a strong adhesion between the fiber and the matrix regardless of whether a traditional polymer matrix, a biodegradable polymer matrix or cement is used. Further this article gives a survey about physical and chemical treatment methods which improve the fiber matrix adhesion, their results and effects on the physical properties of composites. Coupling agents in lignocellulose fiber and polymer composites play a very important role in improving the compatibility and adhesion between polar lignocellulose fiber and non-polar polymeric matrices. In this article, we also review various kinds of coupling agent and interfacial mechanism or phenomena between lignocellulose fiber and thermoplastic polymer.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.14-17
• /
• 2002

A configuration for radio-over-fiber transmission, with remote LO delivery from the central office, and a simple, cost-effective, base station solution is proposed. It is shown that using practically available components, and even with a fiber dispersion of 17 ㎰/nm/km, it is possible to transmit, without repeaters, bit rates of up to 622 Mbit/s for about 20 km at a bit-error rate of 10$\^$-9/, with 0㏈m laser power and a modest optical gain of 6㏈. By increasing the optical gain to 25 ㏈, the link length can be increased to ∼80 km.

• 전자공학회논문지A
• /
• 제32A권11호
• /
• pp.86-93
• /
• 1995

An optical transmitter was designed and implemented using a commercially available LiNbO$_{3}$ Mach-Zehnder modulator and the power amplifiers. We have adopted a new method to stabilize the bias voltage of the modulator using the second order harmonic component of the dithering signal. This technique has been applied successfully to the 2.5 Gbit/s external modulator for more than 6 hours without bit error rate degradaton. We demonstrated a repeaterless transmission of a 2.5 Gbit/s signal over 150 km nondispersion-shifted fiber using the transmitter. The receiver sensitivity was -34.5 dBm at 10$_{-10}$ bit error rate. No appreciable BER degradation due to fiber dispersion were observed after transmission.

• 한국염색가공학회지
• /
• 제18권5호
• /
• pp.30-34
• /
• 2006

Polypropylene fiber was dyed with 4 super hydrophobic dyes having different alkyl derivatives on the same chromophore. Double-tailed cationic surfactant, didodecyldimethylammonium bromide(DDAB), was used to make dye-dispersant complex to improve the dispersion of dyes. As the alkyl groups are longer and the hydrophobicity is increased, the dyeability onto polypropylene fiber was improved and deep coloration was obtained. As for the fastness properties, wash fastness was relatively good, while light fastness was bit low.