• 제목/요약/키워드: Fiber Degradation

검색결과 460건 처리시간 0.029초

Micromechanical 시험법과 동적접촉각 측정을 이용한 플라즈마 처리된 생분해성 Poly(p-dioxanone) 섬유강화 Poly(L-lactide) 복합재료의 계면물성 평가 (Interfacial Evaluation of Plasma-Treated Biodegradable Poly(p-dioxanone) Fiber/Poly(L-lactide) Composites Using Micromechanical Technique and Dynamic Contact Angle Measurement)

  • 박종만;김대식;김성룡
    • 접착 및 계면
    • /
    • 제4권1호
    • /
    • pp.18-27
    • /
    • 2003
  • Micromechanical 시험법과 표면 젖음성 측정을 이용하여 플라즈마 처리된 생분해성 poly(p-dioxanone) (PPDO) 섬유강화 poly(L-lactide) (PLLA) 복합재료의 계면물성과 미세파괴 분해메카니즘을 연구하였다. PPDO 섬유강화 PLLA 복합재료는 장기간의 사용기간 동안 우수한 기계적 물성을 제공할 수 있다. PPDO 섬유와 PLLA 기지재료의 분해정도는 열분석과 광학적인 관찰을 통해서 확인하였다. PPDO 섬유와 PLLA 기지재료 사이의 계면전단강도와 접착일은 플라즈마 처리 시간이 60초 일때 가장 컸으며, 접착일과 polar 표면자유에너지는 계면전단강도와 비례하였다. 초기상태의 PPDO 섬유는 연성파단 형상이 나타났으나, 분해시간이 진행됨에 따라 분자량 감소로 인해 점차적으로 취성 파단 형상으로 변하였다. 계면물성과 미세파괴 분해메카니즘은 분해가 진행됨에 따라 변하기 때문에 섬유강화 생분해성 복합재료의 성능을 조절하는데 중요한 요인들이다.

  • PDF

자외선 처리된 Epoxy/Glass Fiber의 표면 열화 특성에 관한 연구 (A Study on the Surface Degradation Properties of Epoxy / Glass fiber Treated with Ultraviolet Rays)

  • 이백수;이덕출
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제48권2호
    • /
    • pp.86-91
    • /
    • 1999
  • In order to analyse the degradation process of epoxy/glass fiber for outdoor condition, FRP laminate was exposed to the wavelength of ultraviolet rays and evaluated by comparing contact angle, surface resistivity, surface potential decay, and ESCA spectrum respectively. As irradiation energy are increased, the surface properties were steeply decreased in the range of 300[nm]. But the measured values within the scope of400[nm]∼440[nm] showed a increase as compared with the untreated ones. Also, fromthe result of ESCA spectrum, it was confirmed plenty of oxygen groups on the spot showing the maximum decrease of surface properties and the existence of ether groups on the surface of coloring phase. We can conclude that the degradation phenomena on the surface of epoxy composites are dominated by the induction of ester and carboxyl groups.

  • PDF

Effects of Bleaching and Dyeing on the Quality of Alpaca Tops and Yarns

  • Liu, Xin;Wang, Lijing;Wang, Xungai
    • Fibers and Polymers
    • /
    • 제5권2호
    • /
    • pp.128-133
    • /
    • 2004
  • This paper reports the effects of bleaching of alpaca tops and dyeing of bleached alpaca tops/yarns on the quality of tops and yarns. A dark brown alpaca top was bleached with hydrogen peroxide. Two bleaching methods were tried for effectiveness of color removal. A portion of each bleached top was dyed after bleaching. Color parameters were examined for unbleached, bleached and bleached/dyed tops, these tops were then converted into yarns of different twist levels and counts using a worsted spinning system. Some of the bleached yarn from each bleaching method was dyed in a package dye vat to compare the difference of top dyeing versus yarn package dyeing on yarn quality. Fiber diameter, yarn strength, yarn evenness, yarn hairiness and fiber degradation were tested to examine the effects of bleaching and dyeing on these properties at top and yarn stages. A processing route for bleaching and dyeing alpaca fiber was recommended.

페놀수지/탄소섬유 열경화성 복합재료의 유리전이와 고온 분해과정에서 관찰되는 점탄성 특성 연구 (A Viscoelastic Study of Glass Transition and Degradation Processes of Phenolic Resin/Carbon Fiber Composites)

  • 남재도;;윤성철
    • 유변학
    • /
    • 제11권1호
    • /
    • pp.9-17
    • /
    • 1999
  • 본 연구에서는 페놀 수지/탄소섬유 복합재료가 상온에서부터 $400^{\circ}C$까지의 온도범위에서 유리 전이와 분해반응을 경험하면서 나타내는 점탄성 특징을 연구하였다. 가교 결합된 페놀메트릭스의 전형적인 유리전이에 따라 저장 탄성율(storage modulus)은 유리전이에 의하여 감소하였고 고무상태(rubbery state)에 도달함과 동시에 후경화 반응과 분해 반응 등을 포함하는 복합적인 고온반응에 의하여 증가하다가, 최대점을 보인 후 다시 감소하는 모습을 보였다. 유리전이 과정은 시간-온도 중첩원리에 따라 해석하였으나, 분해반응이 수반된 고온에서의 점탄성 특징은 저장 탄성율을 수직 및 수평 방향으로 이동시키어 마스터 커브를 완성 할 수 있었다. 이러한 실험적 결과를 토대로 아레니우스식과 Havriliak-Negami식에서 유추된 점탄성 모델을 이용하여 유리전이와 분해반응이 연속적으로 진행되는 과정을 정량적을 해석할 수 있었다. 이때의 완화시간은 유전이 과정을 통하여 감소하다가 고무상태에 이르러 최소값을 보여주고 이후로는 고온반응에 의하여 증가하는 모습을 보여주었다. 본 연구에서 제안된 점탄성 해석 방법은 반응이 수반된 열경화성 복합재료가 보여주는 점탄성 계수의 복잡한 거동을 온도와 주파수(frequency)에 따라 정확하게 묘사함으로서 이 모델링의 유용성을 증명 할 수 있었다.

  • PDF

Roughage Energy and Degradability Estimation with Aspergillus oryzae Inclusion Using Daisy In vitro Fermentation

  • Chen, C.R.;Yu, B.;Chiou, P.W.S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제17권1호
    • /
    • pp.53-62
    • /
    • 2004
  • The aim of this study was to predict the energy value and dynamic degradation of roughage in Taiwan using the $Daisy^{(R)}$. in vitro fermentation method to provide information on one of the very important nutrients for ration formulation. The second objective was to study the effects of Aspergillus oryzae (AFE) inclusion on nutrient utilization. Three ruminal fistulated dry dairy cows were used for rumen fluid and fifteen conventional forages used in dairy cattle were collected around this island. The degradability of these feedstuffs with and without AFE ($Amaferm^{(R)}$.) treatment was measured using the $Daisy^{(R)}$. in vitro method. The roughage energy values, including TDN and NEL, were calculated according to Robinson (2000). Results from the 30 h in vitro neutral detergent fiber (NDF) degradability and predicted energy evaluations showed that alfalfa (among the forages) contained the highest degradability and energy values, Bermuda straw having the lowest. Peanut vines and corn silage contained higher energy values and the lowest value found in Pangola and Napier grasses among the locally produced forages. Pangola and Napier grasses had lower values than most imported forages except Bermuda straw. Among the by-products, wheat middling contained the highest NDF degradability, while rice bran contained the richest energy value due to its high oil content. From the dynamic dry matter (DM), organic matter (OM), acid detergent fiber (ADF) and neutral detergent fiber (NDF) degradation, corn silage contained the highest effective degradation among the local forages; wheat middling (among the by-products) degraded the fastest in DM, OM, ADF and NDF and showed the highest effective degradability. AFE inclusion was inconsistent among the forages. Alfalfa hay showed significantly increased 30 h NDF degradability and energy values, Pangola hay, Napier grass and brewer's grains showed decreased degradability and energy values. AFE inclusion increased the DM, OM and NDF degradation rate in most forage, but only increased the DM degradation rate in sorghum distiller's grains, the OM degradation rate in bean curd pomace and the NDF and ADF degradation rates in soy pomace (among the by-products).

Feeding Value of Ammoniated Rice Straw Supplemented with Rice Bran in Sheep: II. In Situ Rumen Degradation of Untreated and Ammonia Treated Rice Straw

  • Orden, E.A.;Yamaki, K.;Ichinohe, T.;Fujihara, T.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제13권7호
    • /
    • pp.906-912
    • /
    • 2000
  • The effect of ammonia treatment and rice bran supplementation on the in situ rumen degradation of rice straw was determined using three Japanese Corriedale wethers fitted with permanent rumen cannula. About 4 g samples of diets containing 100% untreated rice straw (URS); 100% ammonia treated rice straw (ARS); 65% URS+30% rice bran (RB)+5% soybean meal (SBM) (T1); and 85% ARS+15% RB (T2) were incubated at 0, 4, 8, 16, 24, 48, 72, and 96 hours in the rumen of sheep to measure dry matter (DM), crude protein (CP) and neutral detergent fiber (NDF) degradability. The DM disappearance of ARS based diets were about 20% higher than that of URS based diets. Rice bran supplementation improved DM disappearance of URS but not on ammoniated straw. Degradation parameters showed that ammoniation increased rate (c) of straw degradation resulting to higher DM and fiber degradability but RB supplementation did not. ARS gave similar DM and CP solubility and effective rumen degradability (ED) with that of the supplemented groups indicating that ammoniation alone can give the same effect on rumen degradability of sheep receiving low quality roughage. All degradation parameters for NDF were consistently higher in ARS based-diets indicating improved fiber solubility. Rice bran supplementation did not affect degradation characteristics of the diets except on soluble DM and CP fraction (A) of URS but not on ARS.

The Dual-frequency (20/40 kHz) Ultrasound Assisted Photocatalysis with the Active Carbon Fiber-loaded Fe3+-TiO2 as Photocatalyst for Degradation of Organic Dye

  • Xiong, Shaofeng;Yin, Zhoulan;Zhou, Yuanjin;Peng, Xianzhong;Yan, Wenbin;Liu, Zhixiong;Zhang, Xiangyu
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권10호
    • /
    • pp.3039-3045
    • /
    • 2013
  • Dual-frequency ultrasound assisted photocatalysis (DUAP) method was proposed to degrade a stable organic model effluent, cresol red (CR), using the prepared $Fe^{3+}$-doped $TiO_2$ with active carbon fiber loading ($Fe^{3+}-TiO_2/ACF$) as photocatalyst. The influence of key factors, including Fe doping amount and power density of dual-frequency ultrasounds (20/40 kHz), on the degradation efficiency was investigated. The degradation efficiency rises to 98.7% in 60 min accompanied by the color removal of CR liquid samples from yellow to colorless transparent at optimal conditions. A synergy index of 1.40 was yielded by comparison with single ultrasound assisted photocatalysis (SUAP) and the photocatalysis without ultrasound assisted (UV/$TiO_2$), indicating that a clear synergistic effect exists for the DUAP process. Obvious enhancement of degradation efficiency for the DUAP process should be attributed to production of large amount of free radicals by strong cavitational effects of dual ultrasounds.