• Journal of the Korean Ceramic Society
• /
• v.29 no.11
• /
• pp.870-876
• /
• 1992

Lead lanthanum zirconate titanate (PLZT, 6/65/35) powders, crack-free and dense thin films have been prepared by polymeric sol-gel process. Pyrolysis of the gel, crystallization and optical transmittance behavior of the PLZT thin film onto sapphire substrate have been studied. Esterification occurs during synthesis of PLZT complexation. Crystalline Pb phase was transiently formed near 450$^{\circ}C$. Content of perovskite phase in the films were increased with increasing thickness of film, but the kinetics of formation of perovskite phase in films was slower than that of powders. Transmittance of the films was decreased with increasing the temperature of heat treatment. Ferroelectric hysteresis loop measurements indicated increments of remanent polarization and coercive field for plenty more of perovskite phase.

• Journal of the Korean Ceramic Society
• /
• v.35 no.3
• /
• pp.294-302
• /
• 1998

$Pb_{1+x}$($Fe_{0.5}$$Nb_{0.5}$)$O_3$ films have been synthesized on Pt/Ti/$SiO_2$/Si substrates using rfmagnetron sputtering Concentration of Fe and Nb in the deposited films was adjusted to near stoichiometry through the control of target composition, Films deposited with adjusted to near stoichiometry showed better electrical properties such as dielectic and leakage characteristics. Crystallinity and dielectric constant increased with increasing excess PbO upto 9 mol% This study also showed that dielectric constant and leakage current characteristics improved by optimum content of $O_2$ flow during deposition.

• Journal of the Korean Ceramic Society
• /
• v.33 no.6
• /
• pp.623-630
• /
• 1996

A Sol-gel derived ferroelectric PbTiO3 thin film was synthesized by using diethanolamine (DEA) as a comple-xing agent. Surface chemical analyses were examined in order to study the effect of heating temperature on the composition of thin film by EPMA and XPS. A rapid volatilization of lead was observed in the films fired at $700^{\circ}C$ or higher and the ratio of Pb:Ti was found to be 34:66. A depth profile by Ar+ showed that the Ar sputtering decreased Pb amount of inner part of the film resulting in Ti-rich phase near the surface of the film.

• Journal of the Korean Ceramic Society
• /
• v.31 no.10
• /
• pp.1115-1122
• /
• 1994

ZT/PZT/ZT multi-layered thin films were deposited on silicon substrate by co-sputtering method for FEMFET device application. Effects of Pb/(Zr+Ti) ratio, films thickness, annealing conditions and substrate temperature on the ferroelectric behavior of the multi-layered films were studied. The best memory device characteristics with leakage current of 2$\times$10-8 A/$\textrm{cm}^2$ and breakdown field of about 1 MV/cm could be obtained with ZT(250 $\AA$) / PZT(1000 $\AA$)/ZT(750 $\AA$) multi-layered thin film deposited at 35$0^{\circ}C$ and post-annealed at $700^{\circ}C$ for 120 sec by RTA(Rapid Thermal Annealing).

• Journal of the Korean Ceramic Society
• /
• v.38 no.5
• /
• pp.474-478
• /
• 2001

유기 화학 기상 증착법(MOCVD)을 이용하여 반응기체 $O_2$의 양 및 Y와 Mn의 운반기체 비(Y/Mn)를 변화시켜가며 Si(100) 기판 위에서 MFSFET(metal-ferroelectric-semiconductor field effect transistor) 구조의 YMnO$_3$박막을 증착하였다. 반응기체 $O_2$의 양이 150sccm일 때 Y/Mn=2와 3인 경우 단일상의 육방정계 YMnO$_3$박막이 형성되었다. YMnO$_3$박막의 전기적 특성은 사방정계 YMnO$_3$박막에서는 나타나지 않았으나, 육방정계 YMnO$_3$박막의 경우 결정립 크기에 영향을 받아 단일상의 육방정계 YMnO$_3$박막 중 결정립 크기가 150nm~200nm(Y/Mn=2)인 경우에는 잔류분극이 100nC/$ extrm{cm}^2$인 P-E 이력곡선의 특성을 나타내었다.

• Journal of the Korean Ceramic Society
• /
• v.25 no.6
• /
• pp.694-698
• /
• 1988

Pb(Zr, Ti)O3-Pb(Co, Nb)O3 systems were investigated by x-ray diffraction method. System contains rhombohedral, tetragonal, and pseudocubic structures at room temperature. Crystal symmetry was changed from 4-fold symmetry to 3-fold symmetry by substituting Pb(Co1/3, Nb2/3)O3 ; PCN, to Pb(Zr0.52, Ti0.48)O3 ; PZT. As the substituted PCN concentration was increased, an increase in a-axis direction and a decrease in c-axis in the perovskite structure were occurred simultaneously, so that the crystal symmetry was changed into such way. In the higher sinteringtemperatures, the unit cell distortions occurred rather in the lower substitution range of PCN. The ferroelectric properties were maximized at the region that tetragonal and rhombohedral or pseudocubic structures were coexist.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11A
• /
• pp.904-908
• /
• 2009

The PZT(lead, zirconium, titanium) based ceramics which, are reported to be ferroelectric materials have their important applications in the areas of surface acoustic waves (SAW), filters, infrared detectors, actuators, ferroelectric random acess memory, speakers, electronic switches etc. Moreover, these PZT materials possess the large electromechanical coupling factor, large spontaneous polarization, low dielectric loss and low internal stress etc. Hence, keeping in view the unique properties of PZT piezoelectric ceramics we also tried to synthesize indigenously the small sized PZT ceramic powder in the laboratory by using the modified sol-gel approach. In this paper, Propyl alcohol based sol-gel method was used for preparation of PZT piezoelectric ceramic. The powder obtained by this sol-gel process was calcined and sintering to reach a pyrochlore-free crystal phase. The characterization of synthesized material was carried out by the XRD analysis and the surface morphology was determined by high resolution scanning electron microscopy.

• Journal of the Korean Ceramic Society
• /
• v.37 no.1
• /
• pp.6-11
• /
• 2000

Electron emission from the Pb(ZrxTi1-x)O3 ferroelectrics by pulsed electric field has been investigated as a function of Zr/Ti ratios such as 35/65, 50/50 and 65/35 below 250kV/cm. Electrons were emitted regardless of the applied field polarity to the rear electrode. When the negative field was applied to the rear electrode, the electron emission charge was more stable. It was proved that the electrons were emitted at the edge of the upper electrode. The emission charge increased in order of 65/35>50/50>35/65. The electron emission characteristics were dependent on the ferroelectric properties such as polarization and coercive field. The emission charge and emission threshold field were affected by the polarization change and the coercive field, respectively. This result explains that the electron emission is a field emission with polarization induced surface potential by a modified Fowler-Nordheim plot of emission charge.

• Journal of the Korean Ceramic Society
• /
• v.44 no.5 s.300
• /
• pp.141-143
• /
• 2007

Nanotubes and microtubes of ferroelectric lead zirconate titanate (PZT) were synthesized by means of a simple and convenient process called a template-wetting process. Nanoporous alumina and macroporous Si were used as template materials to fabricate the corresponding tubes. For the improvement of the wetting properties of the wetting solution, the PZT solution was mixed with a polymer. The polymer was removed completely during annealing. The grain growth processes of the PZT nanotubes during baking and furnace annealing were examined by means of field emission electron microscope (FE-SEM) and X-ray diffractometry (XRD).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.574-577
• /
• 2002

In recent year, BLT$(Bi_{3.25}La_{0.75}Ti_3O_{12})$ has been one of promising substitute materials at the ferroelectric random access memory applications. We manufactured $(Bi_{3.25}La_{0.75}Ti_3O_{12})$ Target with a ceramic process. The BLT target was sintered at $1100^{\circ}C$ for 4 hours. Using RF magnetron sputtering, a deposited BLT thin films were estimated about ferroelectric property as a functions of post annealing time. The BLT thin films showed a promoted ferroelectric characteristics at the post annealied sample for 30 minutes. This sample exhibited the (117) preferred crystal orientation, current density of $2{\times}10^{-8}A/cm^2$, a remanent polarization of $10{\mu}C/cm^2$ and a coercive field of 62.1 KV/cm respectively.