• 한국통신학회논문지
• /
• 제17권9호
• /
• pp.918-926
• /
• 1992

본 논문에서는 이동 통신용 소형 무선기기에 사용가능한 소형 Ferrite-core Loop 안테나를 설계 제작하고 그 특성을 고찰하였다. 안테나는 $10{\times}6{\times}15mm^3$의 크기를 갖는 loop 안테나 내부에 Ferrite core를 삽입하여 제작하였고 제작된 안테나는 $50\Omega$ 정합시 대역폭 (SWR 1.5이하)은 0.55 MHz, Q값은 280으로 동일 크기를 갖는 Loop 안테나 (BW=1.9 MHz, Q=81.4)에 비해 주파수 선택 특성이 우수하였다. 8 방향 방사특성시험 및 TEM Cell을 이용한 수신특성시험에서도 기존의 loop안테나에 비해 11dB이상 이득이 증가됨을 알 수 있었다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1993년도 추계연구발표회 논문개요집
• /
• pp.60-61
• /
• 1993

• 한국전자파학회논문지
• /
• 제18권8호
• /
• pp.977-983
• /
• 2007

최근 근거리에서 수신 모듈에 무선으로 전력을 전달하는 시스템이 많아지고 있다. 무선으로 전력을 공급할 때, 수신 공간의 효율적인 사용을 위하여 ferrite core 주변에 코일을 감아 유도기 전력을 얻는다. 본 논문에서는 100kHz 균일한 단방향의 자계 환경 내에 위치한 페라이트 코어 내부의 자계 분포를 분석한다. 수치 분석을 위 한 시뮬레이터는 유한요소 기법을 적용한 Ansoft사의 Maxwell Tool을 사용하였다. 페라이트 코어의 비투자율의 변화에 따라 집속되는 자속 밀도의 변화를 알아보고, 코일의 권선을 위해 코어의 일부를 잘라내었을 시 총자속의 변화량을 알아보았다. 계산 결과, 100 kHz 자계 환경 내에서 작은 페라이트 코어를 이용하면 코어 내에 약 $3.5{\sim}4$배의 자속 밀도가 증강됨을 확인하였다. 비투자율이 800이면서 반지름의 길이가 4.75 mm인 페라이트 코어의 가장자리에 0.5mm를 도려내었을 때 총 자속은 23% 감소함을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제22권12호
• /
• pp.1078-1083
• /
• 2009

Generally Lighting system consists of lamp and luminaire. When a fluorescent lamp is installed in luminaire, power and light output is changed by ambient temperature. Particularly electrodeless lamp depends on the changes that are mercury pressure with amalgam temperature and magnetic properties with ferrite temperature. It has finally influence on optical efficiency. In this study, the temperature change of ferrite and cold spot, vessel are measured at transitional state and then same characteristics are measured with increase of ambient temperature. At transitional state, luminous flux is related to temperature change of cold spot that compare with behavior of mercury pressure and light output. At increase of ambient temperature, we analyzed change that efficiency and electrical, optical characteristics of elecrodeless lamp are related to ferrite core and cold spot temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.465-466
• /
• 2007

In electrode-less lamp, The key point in creating an efficient light source based on RF discharge is to minimize the RF power loss in the RF coupler which for Anderson's type of RF lamp is due to losses in the ferrite core. This loss depends on the particular ferrite material, its size, geometry, frequency in this kind of inductive lamp shows that the correct choice of discharge current has a crucial effect on the core loss. In this study, we measured Ferrite temperature in normal state, then analyzed electrical and optical characteristics according to ferrite shape. We were able to know that was ferrite of the antenna had relate closely with temperature and luminous of the lamp. Also we appraised temperature and electrical, optical properties during turn on the lamp.

• 한국세라믹학회지
• /
• 제43권11호
• /
• pp.700-702
• /
• 2006

We prepared a Ni-ferrite encapsulated Mo-permalloy powder through simple electroless plating and heat treatment. It was observed that Ni-ferrite particles formed in a spherical form on each Mo-permalloy grain. The microstructure and the magnetic characteristics of the encapsulated powders depended strongly on oxidation time in the heat-treatment. When the powder was oxidized for 60 min, a dense Ni-ferrite layer covered the Mo-permalloy grain, which in turn exhibited high saturation magnetization of 85.8 emu/g. The magnetic core prepared additionally with the encapsulated powder exhibited a resonant frequency of 12 kHz.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 추계 학술대회
• /
• pp.197-202
• /
• 2005

Due to high permeability of the ferrite core, the characteristics of the ICP are expected to be greatly improved. We investigated the effect of the ferrite cores on conventional inductively coupled plasma. It was observed that the current and voltage in ike ICP antenna are slightly decreased and the power transfer efficiency is increased. However, due to eddy current and hysterisis loss, plasma density in the ICP with the ferrite cores is not increased. It seems that the ICP with the ferrite cores at low frequency (${\~}$100kHz) will be greatly improved since the losses at the low frequency can be negligible.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권10호
• /
• pp.652-658
• /
• 2000

In many cases, ferrite magnets of ferrite bonded magnets used in inner-rotor type small brushless DC(BLDC) motors do not have rotor core. The magnetization directions of permanent magnets do not have only parallel or radial direction. In this case, the characteristics of magnets are different from cored type ones which have uniform magnetization direction. In this paper, the magnetization directions and intensities of a ferrite magnet and a ferrite bonded magnet are analyzed by finite element analysis for magnetization procedure. The characteristics of inner-rotor type BLDC motor are analyzed by using the analyzed results. The validity of the method is verified by comparing the analyzed results with measured ones.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.65-69
• /
• 2009

Generally Lighting system consists of lamp and luminaire. When a fluorescent lamp is installed in luminaire, power and light output is changed by ambient temperature. Particularly electrodeless lamp depends on the changes that are mercury pressure with amalgam temperature and magnetic properties with ferrite temperature. It has finally influence on optical efficiency. In this study, the temperature change of ferrite and cold spot, vessel are measured at transitional state and then same characteristics are measured with increase of ambient temperature. At transitional state, luminous flux is related to temperature change of cold spot that compare with behavior of mercury pressure and light output. At increase of ambient temperature, we analyzed change that efficiency and electrical, optical characteristics of electrodeless lamp are related to ferrite core and cold spot temperature.

• 전기학회논문지
• /
• 제57권5호
• /
• pp.833-838
• /
• 2008

Generally Lighting system consists of lamp and luminaire. When a fluorescent lamp is installed in luminaire, power and light output is changed by ambient temperature. Particularly electrodeless lamp depends on the changes that are mercury pressure with amalgam temperature and magnetic properties with ferrite temperature. It has finally influence on optical efficiency. In this study, the temperature change of ferrite and cold spot, vessel are measured at transitional state and then same characteristics are measured with increase of ambient temperature. At transitional state, luminous flux is related to temperature change of cold spot that compare with behavior of mercury pressure and light output. At increase of ambient temperature, we analyzed change that efficiency and electrical, optical characteristics of elecrodeless lamp are related to ferrite core and cold spot temperature. Additionally, spectrum, color temperature and coordination are measured to check that is relation with ambient temperature.