• 제목/요약/키워드: Ferrite Beads

검색결과 16건 처리시간 0.029초

페라이트 비드를 이용한 다등용 전자식 안정기 설계 (The Design of Electronic Ballast for Multiple Lamps Using the Ferrite Bead)

  • 고석철;이재;임성훈;최명호;한병성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
    • /
    • pp.589-592
    • /
    • 2001
  • In this paper, Electronic ballast for multiple fluorescent lamps based on the use of ferrite beads are presented. The use of this system in place of the conventional electromagnetic ballast results in lower power consumption and reduced maintenance cost, because the electronic system has higher efficiency and longer lamp lifetime than the electromagnetic ballast. In comparison with the conventional electronic ballast. The proposed system presents a significant reduction of cost. This reduction becomes were meaningful with the growing of the lamp number. The description of the lighting system, We show that the proposed model can be applied to multiple lamps electronic ballast by simulation processes.

  • PDF

페라이트 비드를 이용한 다등용 전자석 안정기 설계 (The Design of Electronic Ballast for Multiple Lamps Using the Ferrite Bead)

  • 고석철;이재;임성훈;최명호;한병성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 추계학술대회 논문집
    • /
    • pp.589-592
    • /
    • 2001
  • In this paper, Electronic ballast for multiple fluorescent lamps based on the use of ferrite beads are presented. The use of this system in place of the conventional electromagnetic ballast results in lower power consumption and reduced maintenance cost, because the electronic system has higher efficiency and longer lamp lifetime than the electromagnetic ballast. In comparison with the conventional electronic ballast. The proposed system presents a significant reduction of cost. This reduction becomes were meaningful with the growing of the lamp number. The description of the lighting system, We show that the proposed model can be applied to multiple lamps electronic ballast by simulation processes.

  • PDF

전원선에서의 광대역 EMC 필터의 설계 및 제작 (Design and Fabrication of Broad-Band EMC Filter for Power Line)

  • 김동일;구동우;양은정;김도연;예병덕
    • 한국항해항만학회지
    • /
    • 제26권5호
    • /
    • pp.525-528
    • /
    • 2002
  • 제안된 EMC 필터는 높은 투자율의 페라이트 비드와 관통형 콘덴서로 구성하여 제작하였고, 10 MHz ~ 1.5 GHz에서 전원선에서 광대역 노이즈 신호에 대한 EMC 요구를 만족시킨다. 최적의 필터를 설계하기 위하여 페라이트 비드의 임피던스를 계산하여 찾았다. 그 결과, 광대역 EMC 필터는 차동모드 노이즈와 공통모드 노이즈에 대해 10 MHz ~ 1.5 GHz대역에서 30 dB 이상의 필터 특성을제안된 EMC 필터는 높은 투자율의 페라이트 비드와 관통형 콘덴서로 구성하여 제작하였고, 10 MHz ~ 1.5 GHz에서 전원선에서 광대역 노이즈 신호에 대한 EMC 요구를 만족시킨다. 최적의 필터를 설계하기 위하여 페라이트 비드의 임피던스를 계산하여 찾았다. 그 결과, 광대역 EMC 필터는 차동모드 노이즈와 공통모드 노이즈에 대해 10 MHz ~ 1.5 GHz대역에서 30 dB 이상의 필터 특성을 나타내었다. 그리고, DC ~ 1.8 GHz 주파수 대역에서 10 ~ 30 dB이상의 내성 특성을 향상시켰다. 나타내었다. 그리고, DC ~ 1.8 GHz 주파수 대역에서 10 ~ 30 dB이상의 내성 특성을 향상시켰다.

Development of Improved EMC Power Line Filter in New Type

  • Kim, Dong-Il;Kim, Eun-Mi;Ahn, Young-Sup;Jeon, Mi-Hwa
    • Journal of electromagnetic engineering and science
    • /
    • 제8권4호
    • /
    • pp.153-157
    • /
    • 2008
  • Most of malfunctions in electronic equipment or systems controlled by processors is occurred by the differential- and common-mode noises, and the electrical fast transient (EFT). The International Electrotechnical Commission (IEC) has prepared the dummy signal to test the immunity level of the equipment. For the countermeasure against the differential- and common-mode noises, and the EFT, we designed, fabricated, and tested a new electromagnetic compatibility (EMC) filter, which is composed of feed-through capacitors and ferrite beads with high permeability. As a result, the filter showed excellent differential- and common-mode noises filtering, and immunity improving characteristics over the frequency band from 30 MHz to 1.5 GHz and 1.8 GHz, respectively.

국산 플럭스 코어드 와이어 용접에서 입열량이 용접부의 미세조직과 인성에 미치는 영향 (A Study on the Effect of Heat Input on the Microstructure and Toughness of Weldments Made by Domestic Flux Cored Wires.)

  • 고진현;국정한
    • Journal of Welding and Joining
    • /
    • 제11권4호
    • /
    • pp.57-69
    • /
    • 1993
  • In the present study, the microstructure and Charpy V notch toughness of multipass $CO_2$ FCA weldment in three different heat inputs(1-3KJ/mm)were investigated. The weldments using two different domestic FCAW wires(AWS E71T-1 and E71T-5 equivalent) in C-Mn steel were chemically analysed. The following conclusions can be inferred. 1. T-1 wire Showed a stable arc transfer, less spatter and harsh, a better bead spreading and easy slag removal, whereas T-5 wire suffered from the arc stability, which tended to increase spatter and produce a more convex bead. 2.The microsturctures of the top beads of the weldments in three different heat inputs consisted of coarse-grained boundary ferrite and Widmanstatten ferrite side plate with increasing heat inputs. The modest fraction of acicular ferrite in the two wire weldments was observed in the 2KJ/mm heat input. 3.The fine-grained reheated zones of both welds consisted of a duplex microstructure of polygonal ferrite and second phases. 4. The basic flux weldment of T-5wires showed a higher Charpy impact property than that of T-1 wires because of a higher fraction of acicular ferrite in the weld microstructure.

  • PDF

3.0 T MRI 환경에서 마이크로비드를 이용한 서브복셀 추적에 관한 수치해석적 연구 (Numerical Study on the Sub-Voxel Tracking Using Micro-Beads in a 3.0 T MRI)

  • 한병희;이수열
    • 대한의용생체공학회:의공학회지
    • /
    • 제28권1호
    • /
    • pp.102-107
    • /
    • 2007
  • In molecular imaging studies via magnetic resonance imaging, in vivo cell tracking is an important issue for the observation of cell therapy or disease behavior. High resolution imaging and longitudinal study are necessary to track the cell movement. Since the field inhomogeneity extends over several voxels, we have performed the numerical analysis using the sub-voxel method dividing a voxel of MR image into several elements and the information about the field inhomogeneity distribution around the micro-beads. We imbedded ferrite-composite micro-beads with the size of $20-150{\mu}m$ in the subject substituted for cells to induce local field distortion. In the phantom imaging with the isotropic voxel size of $200{\mu}m^3$, we could confirm the feasibility of sub-voxel tracking in a 3.0 T MRI.

PDP용 광대역 EMC 필터의 설계 및 제작에 관한 연구 (A Study on Design and Fabrication of Broad-Band EMC filter for PDP)

  • 김동일;구동우;양은정;김도연
    • 한국전자파학회논문지
    • /
    • 제14권5호
    • /
    • pp.437-443
    • /
    • 2003
  • 정밀 전기.전자기기들이 외부의 전원장해와 과도 전압에 의하여 오동작되거나 부품이 파괴되어 기기의 기억장치가 지워지기도 하며, 전도성 노이즈의 형태로 다른 기기에 장해원이 될 수도 있는 등 그 피해가 늘고 있어 이에 대한 보호대책이 요구되고 있다. 따라서 본 논문에서는 디지털 영상기기인 PDP를 측정대상기기(EUT)로 하여 임피던스에 적합한 노이즈 저감 필터를 제작하고, 더불어 관통형(Feed-through) 커패시터 와 높은 투자율을 가진 페라이트 비드로 이루어 진 필터를 함께 적용한 PDP용 광대역 EMC 필터를 제작하고, 그 특성을 평가하였다. 본 연구에서 제작한 필터의 삽입손실은 10 MHz~l.5 GHz에서 40 dB 이상 감쇠되어 CISPR Pub. 22규격과 IEC 61000-4-4의 level 4까지 만족하는 우수한 필터임을 확인하였다.

PC용 광대역 EMC 필터의 설계 및 제작에 관한 연구 (A Study on Design and Fabrication of Broad-Band EMC Filter for PC)

  • 김동일;정상욱;김민정;전중성
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2004년도 춘계학술대회 논문집
    • /
    • pp.11-15
    • /
    • 2004
  • 본 논문은 개인용 컴퓨터(PC)에 적합한 EMC 필터의 제작에 대해서 다룬다. PC는 CPU를 포함한 여러 소자들이 모여 있어 각 장치들간에 서로 많은 간섭이 일어날 수 있고, PC와 연결되는 여러 외투 장치들에 영향을 받아 불요 전자파가 많이 발생될 수 있다. 따라서 본 연구에서는 PC를 측정대상기기(EUT)로 하여 임피던스에 적합한 노이즈 저감 필터를 제작하였다. 관통형(Feed-through) 컨덴서와 높은 투자율을 가진 페라이트 비드로 구성된 필터를 제작한 필터와 함께 적용하여 PC용 EMC 필터를 제작하였다. 실험을 통해서 제작한 필터가 10 MHz ∼ 1.5 GHz에서 삽입손실이 40 dB 이상 감쇠되며, CISPR Pub. 22 규격과 IEC 61000-4-4의 level 4까지 만족함을 알 수 있었다.

  • PDF

PC용 광대역 EMC 필터의 설계 및 제작에 관한 연구 (A Study on Design and Fabrication of Broad-Band EMC Filter for PC)

  • 김동일;정상욱;김민정;전중성
    • 한국항해항만학회지
    • /
    • 제28권8호
    • /
    • pp.715-719
    • /
    • 2004
  • 본 논문은 개인용 컴퓨터(PC)에 적합한 EMC 필터의 제작에 대해서 다룬다. PC는 CPU를 포함한 여러 소자들이 모여 있어 각 장치 간에 서로 많은 간섭이 일어날 수 있고, PC와 연결되는 여러 외부 장치들에 영향을 받아 불요 전자파가 많이 발생필 수 있다. 따라서 본 연구에서는 PC를 측정대상기기(EUT)로 하여 임피던스에 적합한 노이즈 저감 필터를 제작하였다. 관통형(Feed-through) 컨덴서와 높은 투자율을 가진 페라이트 비드로 구성된 필터를 제작한 필터와 함께 적용하여 PC용 EMC 필터를 제작하였다. 실험을 통해서 제작한 필터가 10 MHz~1.5 GHz에서 삽입손실이 40 dB 이상 감쇠되며, CISPR Pub. 22 규격과 IEC 61000-4-4의 level 4까지 만족함을 알 수 있었다.

선박 탑재 전자기기용 EMC 필터 개발 (Development of EMC filter for electronic equipments mounted on ships)

  • 김동일;김은미;전미화
    • 한국항해항만학회지
    • /
    • 제34권1호
    • /
    • pp.33-37
    • /
    • 2010
  • 본 논문에서는 선박 탑재 전자기기들이 외부의 전자파에 의한 장해와 과도 전압에 의해 전자파 간섭 또는 오동작을 방지하기 위한 목적으로 EMC 필터를 설계 및 제작하였다. 먼저 필터를 구성하는 인덕터의 경우 높은 투자율을 가진 Ni-Zn계열 페라이트 비드와 컨덴서의 경우 공진현상을 최대한 억제하기 위해 공진점이 없는 관통형 컨덴서를 이용하여 EMC 필터를 설계 제작하고, 그 특성을 평가하였다. 그 결과 0 kHz~1.5 GHz 광대역에서 25~70 dB의 우수한 감쇠특성을 얻을 수 있었으며, 과도진압의 경우, IEC 61000-4-4에서 규정하는 level 4에서 4 kV를 인가 시 600 V로 과도전압이 감쇠되는 특성을 얻음으로써, 선박 탑재 전자기기들 간의 전자파 간섭을 억제할 수 있음을 확인하였다.