• Journal of Microbiology and Biotechnology
• /
• v.4 no.3
• /
• pp.215-221
• /
• 1994

Two strains of yeast (RA-74-2 and RA-912) showing superior fermenting ability at a high temperature were isolated from soils and wastewaters by an enrichment culture method. Based on the morphological and physiological charateristics, the two strains were identified as Saccharomyces cerevisiae and Kluyveromyces marxianus, respectively. RA-74-2 was able to grow upto $43^{\circ}C$ and sustain similar fermenting ability in the temperatures range from 30 to $40^{\circ}C$. In addition, the sugar- and ethanol-tolerance of RA-74-2 were 30% (w/v) glucose and 10% (v/v) ethanol, which appeared to be higher than those of nine other industrial yeast strains currently being used in the alcohol factories. The thermotolerant ethanol fermenting yeast RA-912 showed identical growth in the temperatures range from 35 to $45^{\circ}C$ and was resistant to various heavy metals. The quality and quantity of byproducts of the isolated yeast strains in fermentation broth after fermentation at $40^{\circ}C$ and $45^{\circ}C$ were similiar with those obtained at $30^{\circ}C$. These results show that RA-74-2 can be adopted for the ethanol fermentation process where the expenses for cooling system is significant, and suggest that RA-912 may be applied in either SSF(simultaneous saccharification and fermentation) or Flash-fermentation process and RA-912 may be used as a gene donor for the development of thermotolerant ethanol-fermenting yeasts.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.147-158
• /
• 2008

In this study, fermentation characteristics of waste agricultural and forest biomass for production of heat energy were focused to be used in agricultural farm households. The purpose of this study was focused on seeking practical utilization of agricultural and forest biomass wastes in agricultural farm households in the form of thermal energy by means of simple fermentation process. Fermentation process was performed in terms of different raw-materials and their mixture with different ratios. Urea, lime, and bioaids were added as fermenting aids. Moisture contents of fermenting substrates were adjusted to 55~65%. In order to optimize the fermentation process various factors, such as raw-materials, moisture contents, amount of fermenting aids, and practical measurement of hot-water temperature during fermentation were carefully investigated. The optimum condition of fermenting process were obtained from hardwood only and hardwood: softwood (50 : 50) beds. In case of hardwood only the highest temperature was recorded between 60 to $90^{\circ}C$ the lowest temperature was determined to more or less $40^{\circ}C$ and the average temperature was ranged to $50{\sim}60^{\circ}C$ and this temperature ranges were maintained up to 20~30 days. The optimum amount of additives were estimated to ca. 15 kg of urea, 20 kg of bioaids, and 10 kg of lime for 1 ton of substrate. To reach the highest temperature the optimum moisture content of fermenting substrate was proved to 55% among three moisture content treatments of 45%, 55% and 65%. The temperature of hot-water tank installed in fermenting bed of hardwood : grass (50 : 50) showed very different patterns according to measuring positions. In general, temperatures in the mid- and upper-parts of substrate piling were relative higher than lower and surface parts during 45-day fermentation process. The maximum temperature of fermenting stage was determined to $65^{\circ}C$, minimum temperature, more or less $40^{\circ}C$, and average temperature was $60^{\circ}C$. The water temperature of tank exit was ranged to $33{\sim}48^{\circ}C$ during whole measuring periods. It could be concluded that fermentation process of waste agricultural and forest biomass produces a considerable amounts of heat, averaging about $50{\sim}60^{\circ}C$ for maximum 3 months by using the heat exchanger (HX-helical type).

• Journal of Practical Agriculture & Fisheries Research
• /
• v.10 no.1
• /
• pp.169-181
• /
• 2008

The purpose of this study was to produce Pleurotus ostreatus using fermenter with bag cultivation. These results are as follows. 1. While mushroom composts were being fermented in a fermenter, the physical property of the fermented composts was getting better when there isn't any screw or revolving flies in the fermenter and the strength of pressing the composts was getting less. 2. The composts were fermented well as slaked lime of 1% density added to the composts. 3. According to the result of examining our fermenting ways, composts were in the best condition after being fermented for 48 hours since the temperature in a fermenter has come to 60℃, which could be reached by heating the fermenter by 40℃ after putting compost materials and water into it. 4. The good condition of fermenting could be maintained by controlling the speed of revolving flies, therefore the speed be down when the temperature is above 60℃ and up bellow 60℃. 5. Since the composts had been added with 1.5~2% of cottonseed meal or rice bran, the fermented composts were in good condition and also the quantity and quality of the mushroom produced on the fermented composts were satisfied. 6. There were needed 7 hours of labour for 3days from the first day of putting composts into a fermenter for fermenting 3.5M/T(10,000~12,000bags of 750~800g per bag) of composts to the third day of finishing the fermenting work, and also the cost was 112,066￦(130$) including 52,066￦(60$) of electric charge and fuel expense.

• Fashion & Textile Research Journal
• /
• v.15 no.4
• /
• pp.635-641
• /
• 2013

This study examined the dye-properties of natural fabrics dyed with Coptis chinensis and Curcuma longa root fermented with fungi. The optimum culture conditions for the fermentation of microorganisms, the relationship between natural dye color and fermentation conditions were investigated. Two different medical herbs (ground to 80-100 mesh in size) were used as a natural dyeing source. Phellinus linteus (P. linteus), which can grow in different media, such as Agarmedium (only agar containing medium), maltose extract agar (MA) and potato dextrose extract agar (PDA) culture media, were isolated from the medium. P. linteus was confirmed to be the optimum microorganism for the fermentation of Coptis chinensis and Curcuma longa, and the MA medium was confirmed to be the best for culturing. When using the microorganism as the fermenting agent, $32^{\circ}C$ was found to be the optimum fermenting temperature for both natural colorants. Regarding the dyeing property of the fermented natural dye, silk was dyed quite darkly in an appearance by naked eye estimation and the K/S value in the color strength of silk reached a high level of 16 after the fermenting process. The washing fastness of dyed silk after treatment washing was reduced from 4 to under4 and indicates that dyed silk with fermented plant was not unsubstantial. The light fastness was 1 to 2, showing intended to maintain due to the fermentation process.

• Food Science and Biotechnology
• /
• v.16 no.4
• /
• pp.526-530
• /
• 2007

The objective of this study was to establish the optimum alcohol fermenting conditions for the processing of kiwi wine and vinegar products. Six yeast strains were examined for their alcohol production from kiwi at $30^{\circ}C$ for 72 hr with continuous shaking at 100 rpm. Under these conditions, Saccharomyces kluyveri DJ97 produced the highest alcohol content of 10.2%. As the fermentation time extended to 96 hr, the alcohol content reached a maximum of 12.75%. The optimum alcohol fermenting conditions for kiwi fruit were accomplished when kiwi was added to an equal amount of water, inoculated with S. kluyveri DJ97 and fermented at $30^{\circ}C$ for 96 hr with continuous shaking. The content of soluble solids decreased as the alcohol concentration increased, whereas little change was observed in the pH and titratable acidity during the low temperature aging process. Other alcoholic compounds, such as methanol, isopropanol, n-propanol, isobutanol, and isoamylalcohol, tended to increase as fermentation progressed.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.6 no.2
• /
• pp.95-112
• /
• 1998

For the effective disposal of organic food wastes, we seleted 4 strains of microorganism from 186 microbial candidate via enzyme activity test, salt tolerance, food decomposition rate, stability and safety of strains. The identity of these 4 strains are as follows : Fungi is Rhizopus sp., yeasts are Galactomyces sp., Pichia sp. and Hyphopichia sp., In the 50L fermenter scale, we tested various fermenting factor for the optimization of conditions of food waste decomposition using 4 selected strains. The optimum fomenting conditions were as follows : BIO-CHIP Volume 25-30 L, BIO CHIP size 2.0-6.0mm, air flow 200-280L/min, mixing intensity 2-4rpm, temperature $30-45^{\circ}C$. In these fermenting conditions, the efficiency of decomposition(rate of weight loss of food wastes) were 93%. Also the quality of fermenting output were assayed at the basis of fertilizer, and the results were as good as general compost.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.4
• /
• pp.666-674
• /
• 2016

The bacterial strains were screened as potential starters for fermenting low-salt doenjang (a Korean traditional fermented soybean paste) using Korean doenjang based on proteolytic and antipathogenic activities under 6.5-7.5% NaCl conditions. Phylogenetic analysis based on 16S rRNA gene sequences showed that they all belonged to the genus Bacillus. Proteolytic and antipathogenic activities against Escherichia coli, Bacillus cereus, Staphylococcus aureus, Listeria monocytogenes, and Aspergillus flavus, as well as fibrinolytic, amylase, and cellulase activities of the 10 strains were quantitatively evaluated. Of these, strains D2-2, JJ-D34, and D12-5 were selected, based on their activities. The functional, phenotypic, and safety-related characteristics of these three strains were additionally investigated and strains D2-2 and D12-5, which lacked antibiotic resistance, were finally selected. Strains D2-2 and D12-5 produced poly-γ-glutamic acid and showed various enzyme activities, including α-glucosidase and β-glucosidase. Growth properties of strains D2-2 and D12-5 included wide temperature and pH ranges, growth in up to 16% NaCl, and weak anaerobic growth, suggesting that they facilitate low-salt doenjang fermentation. Strains D2-2 and D12-5 were not hemolytic, carried no toxin genes, and did not produce biogenic amines. These results suggest that strains D2-2 and D12-5 can serve as appropriate starter cultures for fermenting low-salt doenjang with high quality and safety.

• Food Science of Animal Resources
• /
• v.38 no.1
• /
• pp.189-202
• /
• 2018

This study was conducted to evaluate the effects of fermenting temperature on the applicability of Lactobacillus plantarum for production of fermented sausages as starter cultures, and its applicable efficiency was also compared with those inoculated with commercial starter culture or non-inoculated control. The L. plantarum isolated from a naturally-fermented meat, identified by 16S rDNA sequencing and again identified by de novo Assembly Analysis method was used as a starter culture. Six treatments: 3 with L. plantarum at different fermenting temperatures (20, 25 and $30^{\circ}C$), and other 3 treatments (1 with commercial starter culture, 1 with its mixture with L. plantarum and 1 non-inoculated control) fermented under the same conditions ($25^{\circ}C$) were prepared. Results revealed that the fermenting temperature considerably affected the pH change in samples added with L. plantarum; the highest pH drop rate (1.57 unit) was obtained on the samples fermented at $30^{\circ}C$, followed by those at $25^{\circ}C$ (1.3 unit) and $20^{\circ}C$ (0.99 unit) after 4 days fermentation. Increasing the temperature up to $30^{\circ}C$ resulted in significantly lower spoilage bacteria count (5.15 log CFU/g) and lipid oxidation level in the products inoculated with L. plantarum. The sensory analysis also showed that the samples added with L. plantarum at $30^{\circ}C$ had significantly higher odor, taste and acceptability scores than those fermented at lower temperatures. Under the same processing condition, although the L. plantarum showed slightly lower acidification than the commercial starter culture, however, it significantly improved the eating quality of the product.

• Journal of the Korean Home Economics Association
• /
• v.8 no.1
• /
• pp.100-119
• /
• 1970

In finding an improved and generalized method of making Jung-pyun, a type of scientific experimental cookey has been attempted with the use of yeast in place of Korean native rice wine named "Takju" The result is shown as follows; 1. Starta prepared with yeast and rice powder was mixed again with fresh rice powder as fermenting and aging agents in Jung-pyum making. 2. Recommendable methods of starta making are shown as follows; a. Recipe Rice powder--Certain amount Yeast--1% Sugar--10% Water--65%(by volume) b. Temperature and Time of Fermentation Temperature--30$^{\circ}C$ Time--20 hrs. 3. Recommendable method of dough making are shown as follows; a. Recipe Starta--Certain amount Rice powder--Two times the starta(2-3 times) Sugar--10% Water--50%(by volume) b. Temperature and Time of Aging Temperature--35$^{\circ}C$ Time--3 hrs. (3-4 hrs) 4. Steaming Time 25-30 min.

• Microbiology and Biotechnology Letters
• /
• v.14 no.5
• /
• pp.365-369
• /
• 1986

The activity of glucoamylase and pullulanase, properties of glucoamylase and ethanol productivities of fusants were studied. Glucoamylase and pullulanase activity of fusants were higher than parents. The optimal pH and temperature of glucoamylase of fusants were very similar to the those produced by S. diastaticus. In alcohol fermentation. fermenting ability and fermentation rate of fusants were higher and faster than either of its parental strain. The maximum of alcohol yield in 15% of liquefied potato starch was 7.8% (v/v)