• 복식문화연구
• /
• 제25권2호
• /
• pp.175-191
• /
• 2017

The purpose of this study is to analyze the body mass index(BMI) and foot characteristics of senior-generation women and to use those values to develop a standard shoe last for producing shoes that best fit the foot of senior-generation women. In order to develop a standard shoe last that reflects the BMI and foot characteristics of senior-generation women, I analyzed the morphometric characteristics of feet by conducting descriptive statistics for each item. The foot characteristics based on BMI were analyzed by conducting ANOVA and Duncan's tests via the foot's measured values. Subsequently, I developed a standard shoe last reflecting the BMI and the foot characteristics of senior-generation women by applying all those values. Senior-generation women showed significant differences among three groups based on BMI-normal weight, overweight, and obese-in all the items except for medial ball width and toe 5 angle. Through these values, I realized that as the value of the BMI becomes higher, the size of the foot becomes larger. This suggests that as a woman's weight increases or decreases, her shoes need to be replaced as well as her clothes. Deviations in the toe-side parts of the shoe could cause deformation of the foot. If someone keeps wearing shoes produced using a shoe last with a large deviation, she risks developing foot conditions like hallux valgus. This situation points to the need for shoe manufacture that utilizes a standard shoe last that reflects the BMI and foot characteristics of the senior generation.

• The Journal of Korean Physical Therapy
• /
• 제29권4호
• /
• pp.223-226
• /
• 2017

Purpose: This study examined two trunk strategies - medio-lateral ramp and anterior-posterior ram - and their effects on pelvis and trunk movements, providing basic material for safe ramp utilization. Methods: The present study included 20 asymptomatic males recruited from a local university. Participants were asked to stand with their feet shoulder-width apart. Their dorsal side faced the camera, and measurements were performed while standing in a neutral double stance, one leg stance, $15^{\circ}$ of medial and lateral ramp, and $15^{\circ}$ of anterior and posterior ramp. Participants were allowed to practice for 3 minutes, and each participant had a 30 seconds rest between the two ramp conditions. One-way repeated measures analysis of variance was used to determine the effects the ramp conditions on spinal alignment. In all analyses, p<0.05 was used to indicate statistical significance. Results: The trunk-inclination angle on the posterior ramp was significantly lower than that of the double stance position (p<0.05). The trunk imbalance angle was significantly higher on the medial ramp, than that on the double stance position (p<0.05). The pelvic position and pelvic torsion angles were significantly higher in the medial, lateral, and anterior ramp positions than that of the double stance position (p<0.05). The pelvic rotation angles on the medial, lateral, and anterior ramps were significantly lower than that of the double stance position (p<0.05). Conclusion: These findings suggest that when people are exposed to the same form of ramp for an extended period, posture modifications may be triggered.

• 한국의류학회지
• /
• 제12권3호
• /
• pp.277-284
• /
• 1988

The purpose of study was to measure to body Surface area and the rational rate of Korean adult's women. The subjects are 20 years old to 49 years old women (Their bust width ranges from 74.5 to 101.5 cm, the height from 144.6 to 163.3 cm, the weight from 44.2 to 74.0 kg, Rohrer Index from 1. 02 to 1. 89). As the experimental method, both the gypsum method, by which the shape of body can be copied as it is, and weighing method, from which planed body surface area can be measured with consistant thickness of polypropylene film used. The results were obtained as follows. 1. After dividing the Korean adult's women into four groups (single and married women in their twenties, those in their thirties, those in their fourties). The change of body surface area was reviewed in accordance with age groups. No great difference among age group was showed in whole body surface area. 2. average value of body surface area is 1, 514m^2 and the part of trunk shows the biggest difference to the age groups. 3. After dividing the middle of body into two groups, the relation of symmetry of each parts is reviewed with difference in body surface area. The results shows that the part of head & neck and lower limbs are symmetrical. The part of trunk and upper limbs are unsymmetrical. 4. Regional rates of each part of whole body surface area are follows. head $4.98\%$, each-lobes $0.46\%$, neck $2.01\%$, face$2.48\%$, upper trunk $19.64\%$, lower trunk $13.91\%$, upper armpits $1.76\%$, lower armpits $12.52\%$, hands $4.64\%$, thighs $18.89\%$, lower legs$13.10\%$, feet $6.01\%$.

• 천문학논총
• /
• 제26권3호
• /
• pp.115-127
• /
• 2011

Since the thirteenth century, large scale facilities and various instruments for astronomical observation were built and installed in East Asia. During the Yuan Dynasty, S. ti.ntai (Beijing astronomical observatory in the Yuan Dynasty, 司天臺) was built in Beijing in 1279. Various astronomical instruments, including Ganui (Jianyi, simplified armillary sphere, 簡儀), Yang-yi (upward hemisphere, 仰儀) and Gyupyo (gnomon, 圭表) were installed in this observatory. These astronomical instruments were modified and improved by researchers of the Joseon Dynasty. Ganuidae (Joseon astronomical observatory, 簡儀臺) was built in Gyeongbokgung (or Gyeongbok palace, 景福宮), Seoul. Its scale was 31 Cheok (Korean feet in the Joseon Dynasty, 尺) in height, 47 Cheok in length and 32 Cheok in width. Lee, Cheon (李蕆, 1376~1451), a responsible leader of Ganuidae project, set up various astronomical instruments with his colleagues. Ganui and Jeongbangan (direction-determining board, 正方案) were installed at the top of this observatory. Gyupyo was installed at the west side of this observatory and Honui (armillary sphere, 渾儀) and Honsang (celestial globe, 渾象) were installed in a small pavilion which was located next to Gyupyo. A decade after installation, this observatory was moved to the north-west side of the palace but almost destroyed during Japanese invasion of Korea in 1592 except Ganuidae. We have analyzed documents about Ganuidae and investigated Chinese remains of astronomical observatories and artifacts of astronomical instruments. In this paper, we suggest the appearance, structure, arrangement and scale of Ganuidae, which are expected to be used for the restoration of Ganuidae at some day in the near future.

• 대한인간공학회지
• /
• 제31권6호
• /
• pp.773-783
• /
• 2012

Objective: The aim of this study is to identify foot shapes of Korean male farmers by classifying their foot types using 3D scan data and analyzing the characteristics of each type. Background: The increasing demands for anthropometric information for the design of machinery and personal protective equipment to prevent occupational injuries has necessitated an understanding of the anthropometric differences to be found among occupations. Static stooped posture and squatting posture are so common in Korean farmers that anthropometric deformation in foot especially seems to occur easily. Method: 366 Korean male farmers volunteered for this study from 16 different farming villages nationwide from 2009 to 2011. Subjects were categorized into 4 age groups from 40s to 70s. Their right feet were measured by using 3D foot scanner, the anthropometric dimensions were composed of 40 items. Results: The 8 major factors affecting the foot shapes were extracted. From these factors the foot shape of Korean male farmers was classified into 3 Foot types. Foot type 1 showed severe deformation in toe 1, type 2 had a narrow shape and type 3 had a wider width for its length. Conclusion: There were some differences in foot shape and types between farmers and the public. The most characteristic foot type in Korean male farmers was type 3. Application: The results of identifying foot shapes of Korean male farmers might provide the useful information for designing ergonomic farm work shoes.

• 대한통합의학회지
• /
• 제8권2호
• /
• pp.97-107
• /
• 2020

Purpose : The purpose of this study is to investigate the effect of squat exercise using a ball on the gap between knees and Q angle of a subject with a genu-varum, and to prove the effect, to provide a clinical basis for developing into a knee correction exercise program. Methods : As a result of posture measurement through GPS, 26 female with genu-varum with a knee length of 5 cm or more were studied. The group was randomly assigned to 13 squat exercise group using ball (experimental group) and 13 general squat exercise groups (control group). The experimental group placed the ball between both knees in a position where the distance between both feet was slightly wider than the shoulder width on a flat support surface, and fixed the ball, and then squat with the start signal. The control group squats without a ball. Each group performed three sets of exercise three times a week for six weeks. Before their exercise, after three and six weeks, EMG, GPS, digital goniometer measurement, the vastus medialis (VM), the vastus lateralis (VL), and the Q-angle were measured in the squat exercise posture. EMG was measured in squat exercise posture. Results : The distance between the knees was reduced. EMG is activated in group A, the group B experimental results showed the high activity of the VL. Q-angle had increased. But the experimental group increased more than the control group. Conclusion : We have confirmed through our experiments that the distance interval between the knees during squat exercises using a ball can be reduced. Furthermore, it would also be helpful to ensure the treatment of genu-varum.

• 제어로봇시스템학회논문지
• /
• 제11권5호
• /
• pp.435-444
• /
• 2005

This paper presents a lane-departure identification (LDI) algorithm for a traveling vehicle on a structured road. The algorithm makes up for the weak points of the former method based on EDF[1] by introducing a Lane Boundary Pixel Extractor (LBPE), the well known Hough transform, and liner regression. As a filter to extract pixels expected to be on lane boundaries, the LBPE plays an important role in enhancing the robustness of LDI. Utilizing the pixels from the LBPE the Hough transform provides the lane-related parameters composed of orientation and distance, which are used in the LDI. The proposed LDI is based on the fact the lane-related parameters of left and right lane boundaries are symmetrical as for as the optical axis of a camera mounted on a vehicle is coincident with the center of lane; as the axis deviates from the center of lane, the symmetrical property is correspondingly lessened. In addition, the LDI exploits a linear regression of the lane-related parameters of a series of successive images. It plays the key role of determining the trend of a vehicle's traveling direction and minimizing the noise effect. Except for the two lane-related parameters, the proposed algorithm does not use other information such as lane width, a curvature, time to lane crossing, and of feet between the center of a lane and the optical axis of a camera. The system performed successfully under various degrees of illumination and on various road types.

• 대한정형도수물리치료학회지
• /
• 제17권2호
• /
• pp.19-24
• /
• 2011

Background: The elderly are likely to fall due to physical and mental atrophies, and experiencing falls may result in fear of falls and lack of self-confidence, which also leads to hesitation to physical activities and changes in walk and balance, the major variables in independent daily life. Methods: In three senior citizen centers located in D city, 22 elderly women aged 65 or older were chosen, and they filled in the questionnaire which included their agreement to voluntarily participate in the survey and medical histories. As to whether they had falls experience, the medical history items in the questionnaire asked them if they had falling down or falls once a year, twice for the three years. The objects were divided to NFE (non-falls experience) and FE (falls experience). Results: 1. As to walking abilities, significant difference was found between NFE and FE regarding walk width, stepping with two feet, and stride length while there was no significant different in terms of cadence. 2. As to balancing abilities, was significant difference between NFE and FE in terms of the physical body center area. As to the sit-to-stand, tandom gait test, no significant difference was found, and neither in the timed up and go test. Conclusions: The elderly with falls experience has inferior walking and balancing abilities to those without falls experience, and thus they are more exposed to the risks of falls.

• 한국의류학회지
• /
• 제15권2호
• /
• pp.127-138
• /
• 1991

The aim of the present stud)r has been to obtain new and additional data allolwing a better design of sports garments as well as a better choice among some materiales, through measure-ment of body surface changes in the upper trunk in movement, measurement on the effects of local heating on other parts of the body and measurement of the thermal resistance of 6 types of materials applied on a manikin. In the first experiment, the upper trunk was divided in 32 Parts, the surface of which was measured by the tape method for two upper limb positions: extension at $90^{\circ}$ and $180^{\circ}$. In the second experiment, skin temperature, local thermal sensations and whole body thermal sensation were measured every 5 minutes during 40 minutes. The four areas of the shoulder, abdomen, hande and feet were heated with the hot pack at $50^{\circ}C$. In the third experiment, the regional thermal resistance of the various materials selected, in two different cases of clothing ease, have been measured by using a thermal manikin. Resultes of experiments were: 1. Extensions cause the upper front part of the trunk surface to lengthen vertically while the back tends to stretch in width. 2. Skin temperatures of the upper limbs are influenced by the abdomen and shoulder boatings. The correlation between the whole body thermal sensation and the upper trunk thermal sensation is significantly asserted. 3. Ceramic and aluminium coated materiales offer the most effective thermal resistance; ease in clothing increases the thermal resistance at the breast and the abdomen as well as the clo value of the materials.

• Physical Therapy Rehabilitation Science
• /
• 제3권2호
• /
• pp.101-106
• /
• 2014

Objective: To investigate the appropriate position for abdominal drawing-in maneuver (ADIM) exercise by rehabilitative ultrasound image. Design: Cross-sectional study. Methods: Twenty-eight young adults with no history of low back pain participated in the study. Three positions compared were crook lying position with hip $60^{\circ}$ flexion, standing position with the feet hip width apart and knees straight, and saddle standing positionunsupported with the knees $20^{\circ}$ flexed. Once in the appropriate position, the subjects were verbally cued to draw in their abdominal wall, with the intention of pulling their navel inward toward their lower back. The thickness of each transversus abdominis (TrA), internal oblique (IO), and external oblique (EO) muscles were measured via ultrasound and recorded at the end of inspiration. Results: When compared to the TrA thickness of rest, the TrA thickness was significantly increased in all three positions (crook lying, standing, and saddle standing) during the ADIM (p<0.05). IO thickness was significantly greater in standing and saddle standing than in crook lying (p<0.05). EO thickness was constant in all the three positions. Conclusions: The present study suggests that standing and saddle standing positions could be recommended for the ADIM to maximize recruitment of the TrA and IO activation. Specifically, the saddle standing position with knees flexed to $20^{\circ}$ was observed to increase the TrA activation more than the standing position. These findings should be considered when core stability exercises such as the ADIM are conducted.