• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.10
• /
• pp.1450-1459
• /
• 2001

These experiments were conducted to investigate the effects of different feeding and processing methods of diets on performance, morphological changes in the small intestine and nutrient digestibility of growing-finishing pigs. One-hundred fifty growing pigs ($Yorkshire{\times}Landrace{\times}Duroc$; initial body weight of $23.33{\pm}0.75kg$) and one-hundred twenty finishing pigs ($Yorkshire{\times}Landrace{\times}Duroc$; initial body weight of $59.22{\pm}0.56kg$) were used in Exp. 1 and Exp. 2, respectively. Pigs were grouped on the basis of body weight and gender, and randomly allotted into 6 different treatments with 5 replications in each treatment in a $2{\times}3$ factorial arrangement. Treatments were 1) dry feeding with a mash diet (DM), 2) dry feeding with a pelleted diet (DP), 3) dry feeding with an expanded crumble diet (DEC), 4) dry/wet feeding with a mash diet (WM), 5) dry/wet feeding with a pelleted diet (WP), and 6) dry/wet feeding with an expanded crumble diet (WEC). In Exp. 1 (growing phase), there was no significant difference in average daily gain (ADG) and average daily feed intake (ADFI) among treatments during the entire experimental period, but feed conversion ratio (FCR) was significantly (p<0.05) improved in pigs fed pelleted diets regardless of feeding method. FCR was best in pigs fed a DP diet and worst in pigs fed a WM diet. Pigs fed a pelleted diet showed a 6.2% or 4.0% improvement in FCR compared with those fed a mash diet or an expanded crumble diet. Water disappearance was not significantly affected by dry/wet feeding or feed processing. Significant differences in villus height were not found among treatments, but villus height tended to be improved by dry/wet feeding. Dry/wet feeding or feed processing did not affect crypt depth. Digestibilities of calcium and phosphorus were significantly (p<0.05) improved in pigs fed an expanded crumble diet compared with pigs fed mash diets. Especially, pigs fed a WEC diet digested 8.1% more P than those fed a DM diet. Feed cost per kg weight gain (FCG) tended to be increased by dry/wet feeding rather than dry feeding. In Exp. 2 (finishing phase), ADG and ADFI were not significantly different among treatments, but a significant difference in FCR was found among feed processing forms. The best FCR was obtained in pigs fed a pelleted diet. Pigs fed a DP diet showed a 11.3% improvement compared with those fed a DEC diet. Water disappearance was significantly (p=0.0408) decreased by feeding the mash diet. However, water disappearance was not affected by dry/wet feeding during the finishing period. The villus height and crypt depth were not significantly different among treatments. However, crypt depth tended to be decreased by dry/wet feeding at the mid part of the small intestine. Fat digestibility was improved by dry feeding rather than dry/wet feeding, and was improved by 4.8% by feeding pellet diets compared with expanded crumble diets. Except for carcass grade, carcass characteristics were not significantly (p<0.05) different among treatments. Carcass grade was the best in pigs fed a WP diet. Feed cost per kg weight gain (FCG) was significantly decreased in pigs fed a pelleted diet compared with those fed an expanded crumble diet, and tended to be decreased by dry/wet feeding. In conclusion, these studies suggest that feeding the pelleted diet to growing-finishing pigs can be beneficial in terms of FCR and production cost. Dry/wet feeding can be helpful for the maintenance of villus height, but may not be reflected in improved growth performance or reduction of production costs.

• Korean Journal of Poultry Science
• /
• v.21 no.4
• /
• pp.257-266
• /
• 1994

Three protein feeding systems for egg-type pullets involving conventional step-down protein 18-15-12%), step-up protein(12-15-18%) and single-stage low protein (13-13-13%) with an iso-energy level of 2,900 ME kcal /kg were compared to examine the effect on pullet growth and subsequent laying performance. During the growing period, pullets subjected to the step-up and single-stage low protein feeding systems were lighter in body weight and consumed less feed and netabolizable energy than those on the conventional step-down protein feeding system(P<0.05). 3ut the pullets on the step-up protein diet consumed more protein, and those on the single-stage low protein diet consumed less protein than those on the step-down protein diet(P<0.05). Also, he feed cost was less in pullets on the single-stage low protein diet than in those on the other systems(P<0.05). During the laying period, sexual maturity was later in hens reared on the step-up and single-stage low protein diets than in those on the step-down protein diet(P<0.05), however, average hen-day egg production and egg weight were not significantly affected by the protein feeding systems in the growing period. Daily feed intake and feed required per egg were significantly reduced in hens on the single-stage low protein diet compared to those on conventional protein feeding system(P<0.05). It was concluded that the 13% single-stage low protein feeding system produced smaller pullets with less feed, energy, protein, and feed cost during the growing period, and hens reared on that system consumed less feed during the laying period without any impairment of production compared to the conventional rearing system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.10-14
• /
• 2005

This report deals with a feeding system of the Coaxal grinding machine, processing optical ferrule. This report also examines the applicability of using the feeding system for the Coaxial grinding machine, by mean of conducting performance estimation. The results are as follow; Repeatability of regulating wheel is $17{\mu}m$, R/W rotation accuracy is between $30\;\~\;40{\mu}m$. This means 'Rotation accuracy' is lower than the concentricity level. Backlash generation level at the feeding system of the grinding wheel is under $1{\mu}m$, thereby positioning accuracy is controlled within $2{\mu}m$ In terms of repeatability, you can find occasional error at the returning process from the starting point. This error is resulted from the measurement tolerance of the starting point sensor. We will get the repeatability level under control by $1{\mu}m$, through improving the soft-ware used and up-grading the sensor at the starting point.

• Journal of the Korean Dietetic Association
• /
• v.2 no.1
• /
• pp.81-91
• /
• 1996

Customer satisfaction concerning foodservice quality characteristics were evaluated by using importance performance analysis(IPA) techniques in employee feeding operations. The purpose of this study were to survey employees' health condition and their food habits, to examine employees' perception of the importance and performance concerning foodservice quality charactertics and to analyze attributes for quality improvement in employee feeding operations. A questionaire for survey was developed and mailed to 1,700 employees and the response rate was 60.8%. Statistical data analysis was done using the SAS programs for descriptive analysis, $x^2$-test, F-test and Fisher's LSD. The results of this study were as follows 1. Most of employees responded that their health condition were generally good. 2. 17.8% of surveyed employees responded that they usually skipped their breakfast. 3. Main reasons of using employee feeding facilities identified were convenience and cheap price of meals. 4. Dissatisfied quality attributes identified were taste of food, atmosphere and location d dinning room, and the quality of food served for breakfast and dinner, 5. Satisfied quality attributes identified were nutritionally balanced meal with variety, competitive managerial skills of dietetian, and quality of food served for lunch.

• Journal of Animal Science and Technology
• /
• v.52 no.3
• /
• pp.205-212
• /
• 2010

Two experiments were conducted to study the effects of dietary protein level and phase feeding regimens on performance, carcass characteristics and pork quality in growing-finishing pigs. In both experiments, growing pigs (n=90; barrows; Landrace $\times$ Yorkshire $\times$ Duroc) were allotted to 3 treatments. Each treatment had 3 replicate pens comprising 10 pigs in each. In Exp. 1, pigs (average body weight $25.06{\pm}0.57\;kg$) were fed diets having low (17.50-14.50-12.51%), medium (19.49-17.50-13.87%) or high (22.47-19.49-16.36%) CP concentration (LP, MP and HP diets, respectively) diets during grower-finisher I-finisher II phases, respectively. Feeding of MP diet resulted in higher (P<0.05) ADG and better FCR than pigs fed LP diet. Pigs fed HP diet had lower (P<0.05) pork color and marbling score. Meat of pigs fed LP diet had higher (P<0.05) Thiobarbituric acid reactive substances (TBARS), while meat of pigs fed HP and LP diets had greater drip loss than pigs fed MP diet. In addition, meat from pigs fed LP diet was darker while meat of pigs fed HP and MP diets was paler and redder. In Exp. 2, pigs (average body weight $10.40{\pm}0.61\;kg$) were subjected during 126 days to three or four phase regimes of different duration. The treatments T1 and T2 were subjected to four phase feeding regimens (grower I, grower II, finisher I and finisher II) for 22, 42, 32 and 30 days (T1) and 40, 40, 25 and 21 days (T2), respectively, while T3 was subjected to three phase feeding regimen (grower I, grower II and finisherI) for 40, 56 and 30 days, respectively. Duration of phase feeding regimens had no effect (P>0.05) on the performance, carcass traits and meat quality of pigs. These results suggest that both high and low levels of CP have a negative effect on performance and pork quality; however, alterations in the phase feeding regimens do not have any discernible effect on the performance and pork quality in growing-finishing pigs.

• Journal of Animal Science and Technology
• /
• v.46 no.5
• /
• pp.773-782
• /
• 2004

The objective of this work was to establish an approaching method for TMR feeding system in the farm situation by testing the effects of herd-mix feeding system on the performance of lactating cows. Fifty six Holstein cows were fed for the experimental period of 16 months. Prior to test the herd-mix feeding system, animals were kept on conventional feeding system for 4 months, separate feeding of forage with concentrate, then provided 3 types of herd-mix rations formulated by mean level of energy concentration requirement of higher 1/2 ranker in each herd for remaining 12 months to compare the effect on milk yield performance of animals with conventional feeding system by using a switch-over method. The herd-mix feeding system influenced substantially upon the improvements of milk yield(P<0.01) and milk fat percentage(P<0.05). In all of lactational ages, milk yield and milk fat were enhanced by the herd-mix feeding system. Especially, actual milk yield(AMY) and milk fat in the 1st lactating cows, and AMY and 4.0% fat corrected milk yield(FCM) in the 2nd lactating cows were increased signiticantly by the herd-mix feeding system(P<0.05). In the early and mid-stage of lactation, the herd-mix feeding system showed higher AMY and FCM compared with the conventional feeding system although the milk fat was not different. AMY, milk fat and FCM in the late-stage of lactation were increased generally by the herd-mix feeding system. Especially, milk fat and FCM obtained by the herd-mix feeding system were significantly higher than those by the conventional feeding system(P<0.01). The herd-mix feeding system showed a good type of milking curve with a higher persistency of FCM(93.24%) than in conventional one(92.69%). The income over feed cost with the herd-mix feeding system was lA-fold higher than that with the conventional feeding method. In conclusion, the results of this work suggest that the herd-mix feeding system based on a correct level of energy concentration of TMR and well-determined feed ingredients increases not only milk yield of dairy herd by enhancing the performance of cows in early to mid stage of lactation with improved milk persistency but also gross income of dairy farm.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.2
• /
• pp.164-169
• /
• 1997

The present experiment was conducted to evaluate the effects of feed processing and feeding methods on growth performance and carcass characteristics of growing-finishing pigs. A total of 72 pigs (LYD, 22.24 kg BW) were employed for a 90-d feeding trial. Treatments were 1) mash dry feeding (MD), 2) mash wet feeding (MW), 3) pellet dry feeding (PD), and 4) extruded pellet dry feeding (EPD). Corn, soybean meal and wheat bran in the basal diets were extruded before mixing and pelleting for EPD diet production. Ileal or fecal digestibility and carcass traits including lean meat percentage and weights of stomach ulcer were also examined. During the growing period, pigs fed PD showed improved (p < 0.05) average daily gain (ADG) and feed conversion (F/G) over those fed MD, whereas no significant differences in average daily feed intake (ADFI) were found among dietary treatments. Finisher pigs fed MD showed lover, but not significant, ADG and F/G than those fed MW, PD or EPD. For the overall period, pigs fed PD grew faster (p < 0.05) than those fed MD or EPD. Feed intake was different between the two feeding methods (MD vs MW), and between the two processed feeds (PD vs EPD). The digestibility of crude fat was higher (p < 0.05) in pigs fed EPD than in pigs fed mash feeds. NFE digestibility of EPD treatment was also higher (p < 0.05) than that of PD. Back fat (10th rib area) was thicker (p < 0.05) tn pigs fed MD than in pigs fed EPD. other carcass traits including incidence of esophagogastric ulcers were not different among treatments. In conclusion, pelleting appeared to bo the desirable processing methods and wet feeding could also be recommended for growing-finishing pigs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.11
• /
• pp.1643-1648
• /
• 2006

To investigate the effects of feeding restricted on growth, carcass characteristics and plasma profiles in an attempt for optimum responses, a total of 108 cross-bred finishing barrows [(Landrace${\times}$Yorkshire)${\times}$Duroc]weighing an average of $46.88{\pm}0.52kg$ were assigned in a randomized complete block (RCB) design to one of four treatments with three replicates and nine pigs per pen. Feeding regimens were, 1) ad libitum from 50 kg to market weight (Ad 3/3), 2) restricted feeding from 90 kg to market weight (Ad 2/3), 3) restricted feeding from 70 kg to market weight (Ad 1/3), and 4) restricted feeding from 50 kg to market weight (Ad 0/3). During the experimental period, average daily feed intake (ADFI) was decreased from 2.53 kg (AD 3/3) to 2.09 kg (AD 0/3) with increasing restricted feeding duration of (p<0.05). Average daily gain (ADG) of AD 3/3 (0.79 kg) was significantly higher (p<0.05) than those of AD 1/3 (0.74 kg) or AD 0/3 (0.72 kg). Feed efficiency was not influenced by restriction regimens. Blood IGF-I concentrations were increased from 74.14 to 134.25 (167.36-115.66) ng/ml as body weight increased. Blood leptin concentrations were affected by feed intake level and coincided with blood IGF-I concentrations. Most of carcass characteristics were not significantly affected by restricted feeding, however cooking losses in AD 1/3 and Ad 0/3 treatment diet were higher than those in Ad 3/3 and Ad 2/3. In addition, there was a trend that backfat thickness was lowered in proportional to decreasing feed intake (p>0.05). In conclusion, restricted feeding improved feed efficiency after 50 kg body weight without deteriorating the pork quality of barrows.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.6
• /
• pp.607-613
• /
• 2009

In this paper, we made a simple paper feeding system which is one of MTS (media transport system) and controllers. The plant has a flexible paper and two driving rollers and two driven rollers. The control system has two conventional PID controllers. Skew angle and feeding speed of MTS deteriorate the quality of feeding system. In order to control a feeding speed and skew of feeding paper, we control rotational velocity of two driving rollers. Therefore, this controller has two inputs and two outputs as MIMO (multi-input and multi-output) system. The control inputs were the feeding speed and the skew displacement of the paper. The control outputs were the rotational velocity to each driving roller. To find appropriate PID gains of two controllers, we proposed an optimization technique. We assume the system variables and performance of a whole system as follows. PID gains of two controllers for skew and feeding speed are system variables. System performance is both skew and feeding speed. We simulates to making mathematical correlation using global Kriging interpolation. To find appropriate value of system variables, optimization method is simulation in sequence as following method. First, the optimization solver simulates with DOE (design of experiment) tables to find correlation equation of both system variable and performances. Then, the solver guesses the appropriate values and simulates if the system variables are appropriate or not. If the result of validation doesn't satisfy the convergence and iteration tolerance, the solver makes a new Kriging models and iterates this sequence until satisfy the tolerances.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.1
• /
• pp.61-65
• /
• 2002

The experiment was conducted to find out the effect of four feeding systems namely; stall feeding, tethering, restricted grazing and grazing on carcass characteristics of Black Bengal goat. Twenty four does of approximately 1 year of age were randomly selected for four treatments of feeding systems having 6 replications in each. Stall fed goats were kept into house all time and adequate amount of natural grass were supplied for ad libitum feeding. Goats of tethering group were tethered for eating natural grass from 8 a.m. to 4 p.m. and were transferred after one hour interval for changing the grazing place. Goats of restricted grazing group were allowed for grazing from 8 a.m. to 1 p.m. Goats of grazing group were grazed for 8 a.m. to 4 p.m. Concentrate supplement was given at the rate of 150 g per day per goat for all of the treatment groups. Goats were slaughtered after the experiment of 219 days. Body length and height at wither were significantly higher in stall feeding group than others. Average dressing percentage were 42.18, 39.0, 36.79 and 34.0 for stall feeding, tethering, restricted grazing and grazing groups, respectively. Dressing percentage varied significantly (p<0.05) among feeding groups. Caul fat and empty gut weight differed significantly (p<0.05) in all of the feeding systems but others non-carcass parameters did not differ significantly. Percentage of dry matter and ether extract were also significantly (p<0.05) higher in stall fed groups. In conclusion, among four treatment groups, performance of stall fed goats were most satisfactory and then tethering showed better performance than any other groups.