• Journal of Biosystems Engineering
• /
• 제26권1호
• /
• pp.11-20
• /
• 2001

Experiments under the stationary and harvesting condition, were performed in order to investigate the vibration characteristics of a head-feeding combine. 6 degrees of freedom components of acceleration at the location of the center of the gravity, and 3 degrees of freedom components of acceleration at the location of the operator seat were measured independently. The vibration characteristics of the combine were estimated with the power spectral density of the time series data of accelerations. From this research, the following results were obtained. 1. Vibration of a head-feeding combine under the stationary condition(engine, thresher and cutter are driven without harvesting) is mainly influenced by the engine. Further, 1/3, 1/2 (sub-harmonic) frequency components of the engine are observed besides engine driving frequency component(45Hz). 2. Vibration of a head-feeding combine under the harvesting condition is influenced by the engine, threshing unit and driving unit. Namely, some kinds of vibration frequency components in harvesting are observed compared with stationary condition. Further, sub-harmonic frequency components of the engine are observed besides engine driving frequency component as same as stationary condition. From these results, it may be concluded that vibration of a head-feeding combine is characteristics of semi-periodic and nonlinear vibration.

• Child Health Nursing Research
• /
• 제22권2호
• /
• pp.79-86
• /
• 2016

Purpose: The purpose of this study was to identify breastfeeding practice with late preterm infants (LPIs), and to determine predictors of exclusive breastfeeding at the 12th week after discharge. Methods: The participants were 106 mothers of LPIs hospitalized in neonatal intensive care units at two university hospitals. Data were collected between February and October, 2013. Questionnaires included characteristics of LPIs, their mothers, and feeding-related characteristics. Feeding methods were exclusive breastfeeding, mixed feeding, and formula feeding. Results: Exclusive breastfeeding steadily increased from 5.7% at the 1st week to 19.8% at the 12th week, as did formula feeding from 27.3% to 67.9%. Contrarily, mixed feeding decreased from 67.0% at the 1st week to 12.3% at the 12th week. The ratio of formula feeding was higher than that of exclusive breastfeeding over time. Predictors for exclusive breastfeeding were the following: type of delivery (OR=2.96, 95%CI=1.07-8.14), feeding intolerance (OR=3.03, 95%CI=1.26-7.25) and feeding method during hospitalization (OR=7.84, 95%CI=3.15-19.53). Conclusion: In order to increase breastfeeding opportunities for LPIs, educational programs for gestational age-appropriate breastfeeding should be developed. The focus of breastfeeding education needs to be on mothers who delivered their LPIs through Cesarean-section and LPIs who had feeding intolerance or were fed only formula during hospitalization.

• Child Health Nursing Research
• /
• 제6권1호
• /
• pp.78-88
• /
• 2000

The purpose of this study was to investigate the mother's knowledge level of breast feeding and nursing activities related to breast feeding perceived by mothers. The subjects were 77 mothers who within 3 days after child birth in 2 Obstetric Clinic in Seoul and P city from Dec 1 to 31, 1999. Data were collected by a questionnaire developed Jung et al.(1994). This study was statistically analyzed according to Frequency, t-test and ANOVA. The results are as follows : 1) The characteristics of subjects : The majority of subjects were aged 30-34 years(44.2%), high school & college graduate(93.6%), had one child(51.9%), had no religion(42.9%), jobless(72.7%) and had no experience of breast feeding(59.7%). 2) Mean score of mother's knowledge level of breast feeding was ranged from 7-16. Mean score of breast feeding was 11.56 points out of possible 20 points meaned that it was a low level. 3) General characteristics were significantly related to mother's knowledge level of breast feeding as follow : age(F= 3.99, P < 0.001) and religion(F= 4.30, P < 0.05). 4) Mean score of nursing activities related to breast feeding by mothers was ranged from 30-146. Mean score of nursing activities related to breast feeding perceived by mothers was 100.05 points out of 150 points meant that it was a high level.

• 대한지역사회영양학회지
• /
• 제10권4호
• /
• pp.462-470
• /
• 2005

The purpose of this study was to determine the characteristics of infants' temperaments, maternal feeding behaviors and feeding practices in picky eaters. Participants were 83 infants (aged 12 - 24 months) from 'A' hospital (Seoul) and 'B' public health center (Kyunggido). Mothers completed questionnaires that assessed their own feeding behavior, feeding practices, infants' temperament and infants' feeding behavior. Picky eaters' demographics were not significantly different from non-picky eaters after adjusting sex and age. The average of thiamin, niacin and vitamin E intakes of picky eaters were below $75\%$ Korean RDA, whereas vitamin A intakes exceed $120\%$ RDA in both groups. Activity level of infants' temperament and disinhibition of maternal feeding behavior in picky eaters were significantly higher than those in non-picky eater. All constructs of infants feeding behavior were significantly associated with certain constructs of infants' temperament, maternal feeding practice and maternal feeding behavior. The pickiness of infants feeding behavior was positively correlated with activity level of infants' temperament, pickiness and disinhibition of maternal feeding behavior and negatively correlated with adaptability of infants' temperament. Findings suggest that maternal feeding behavior and feeding practices as well as infants' temperament should be addressed in nutrition education for picky eaters.

• 한국식생활문화학회지
• /
• 제23권2호
• /
• pp.268-272
• /
• 2008

The breast feeding habits of 507 college students were evaluated between March 27 to April 26 (2006). Data were collected from self-administered questionnaires and analyzed using SPSS for Windows V.12.0. The study population consisted of 245 (48.3%) male and 262 (51.7%) female college students that answered ‘yes’ when asked whether they had been breast feed. A total of 52.7% of the study population were fed with breast milk (most frequent answer), as opposed to 11.0% that were fed with infant formula (least frequent answer) during their infancy. When asked whether they ever got educated on breast feeding, 78.1% of the college student subjects answered ‘no’. A total of 95.1% of the female college students replied ‘yes’ when asked if they intended to breast feed their child. Moreover, 62.2% of the college student subjects indicated that their parents had an influence on their decision to breast feed. A comparison between male and female college students indicated that female college students had a superior knowledge level of the general characteristics of breast feeding over the male subjects (p<0.05) . Moreover, a comparison of the different levels of college attained suggest that freshman college students had the highest knowledge level, followed by senior, sophomore and junior college students in terms of advantage, BF Tabu (p<0.05). Also, students provided with education on breast feeding had a higher knowledge level than college students with no formal education. In summary, the results suggest that the knowledge on breast feeding in college students were different by general characteristics such as gender, major and school year, and education on breast feeding in advance was appeared to be an important factor, therefore nutritional education course on breast feeding is recommended for the college students.

• 한국직업건강간호학회지
• /
• 제17권2호
• /
• pp.155-165
• /
• 2008

Purpose: The purpose of this study was to investigate the condition, recognition of breast feeding of 273 nurses. Method: Data was collected using a structured questionnaire form April to June 2007. The subjects were 273 nurses in Kyunggido. The data analysis was done with descriptive statistics, $x^2$-test procedures using SPSS/WIN 12.0 PC. Result: There are 23.9% of child day care center, 5.2% of rest room for women, 16.8% of breast feeding room in workplace. Rate of breast-feeding practice was 78.4% of nurses. The reasons why they could not perform the breast-feeding include mother's job(45.4%), lacking breast milk(25.8%). The characteristics of nurses found to be related breast-feeding include age, number of employers. Conclusion: The results showed that the rest supports of the work environment was insufficient to perform breast-feeding in the workplace. These results suggest that nursing intervention for employed mother's breast-feeding practice behavior promotion should focus on characteristics influencing factors on workplace. Also, efficient breast-feeding education program for employed mothers should be developed by continuous qualitative researches based on breast-feeding experiences of employed mothers.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.75-78
• /
• 2004

In an optical disk drive, a feeding system which is used to move the optical pick-up system to the target position and the proper control scheme of it are important in random access performance. Since the effect of control is directly affected by the modeling precision of the real system, the precise modeling to the real system should be acquired. Although a simple linear order modeling to the feeding system of an optical disk drive is useful in understanding of the overall dynamic characteristics, the dynamic characteristics which are belongs to the nonlinear area cannot be predicted correctly. Furthermore, the feeding system of an optical disk drive has many nonlinear characteristics such as a nonlinear friction and backlash. For this reason, the understanding of the nonlinear properties in the feeding system is very important. In this paper, the nonlinear items of the feeding system, friction and backlash, are introduced and the effect of it are investigated. Finally, the mathematical model considering the nonlinear properties is compared to the real system, and some comments of it are given.

• 한국생산제조학회지
• /
• 제22권3호
• /
• pp.380-387
• /
• 2013

In this study, two finite element (FE) models were developed to evaluate the thermal characteristics of a feeding axis of a CNC lathe. One was used for analysis of heat transfer to identify the temperature distribution of the feeding axis and then, the other was used for analysis of thermal deformation to evaluate its structural behavior based on the temperature distribution. The FE models were based on the test standard for the axial thermal displacement. The feeding velocity was composed of three steps: the ascending, constant, and descending velocities. Therefore, the heat generation and convection coefficient were calculated for each velocity and applied to the thermal FE model. The convection coefficient for the ball screw rotation was based on an experimental equation. The result of the analytical thermal displacement was compared with that of the experimental displacement to verify the finite element models.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권11호
• /
• pp.1643-1648
• /
• 2006

To investigate the effects of feeding restricted on growth, carcass characteristics and plasma profiles in an attempt for optimum responses, a total of 108 cross-bred finishing barrows [(Landrace${\times}$Yorkshire)${\times}$Duroc]weighing an average of $46.88{\pm}0.52kg$ were assigned in a randomized complete block (RCB) design to one of four treatments with three replicates and nine pigs per pen. Feeding regimens were, 1) ad libitum from 50 kg to market weight (Ad 3/3), 2) restricted feeding from 90 kg to market weight (Ad 2/3), 3) restricted feeding from 70 kg to market weight (Ad 1/3), and 4) restricted feeding from 50 kg to market weight (Ad 0/3). During the experimental period, average daily feed intake (ADFI) was decreased from 2.53 kg (AD 3/3) to 2.09 kg (AD 0/3) with increasing restricted feeding duration of (p<0.05). Average daily gain (ADG) of AD 3/3 (0.79 kg) was significantly higher (p<0.05) than those of AD 1/3 (0.74 kg) or AD 0/3 (0.72 kg). Feed efficiency was not influenced by restriction regimens. Blood IGF-I concentrations were increased from 74.14 to 134.25 (167.36-115.66) ng/ml as body weight increased. Blood leptin concentrations were affected by feed intake level and coincided with blood IGF-I concentrations. Most of carcass characteristics were not significantly affected by restricted feeding, however cooking losses in AD 1/3 and Ad 0/3 treatment diet were higher than those in Ad 3/3 and Ad 2/3. In addition, there was a trend that backfat thickness was lowered in proportional to decreasing feed intake (p>0.05). In conclusion, restricted feeding improved feed efficiency after 50 kg body weight without deteriorating the pork quality of barrows.

• 한국연소학회지
• /
• 제10권2호
• /
• pp.26-34
• /
• 2005

The performance of oxygen combustion with $CO_2$ feeding was investigated in a pyrex tube furnace. The inverse type multi-hole burner was used for improving mixing and wide operating range. It introduced oxygen, fuel, and oxygen, respectively, from center tube to outer tubes. Oxygen combustion characteristics with excess oxygen ratio, oxygen feeding ratio, and $CO_2$ feeding flow rate were studied to optimize the operating condition and to apply the oxygen combustion with recirculation of flue gas to a real furnace. This paper presents results on the effect of $CO_2$ feeding flow rate on the structure of the flames and concentrations of NO and CO emissions. The visible flame length was shortest due to well mixing between fuel and oxygen when the oxygen feeding ratio was 0.25. The NO emission was reduced drastically regardless of excess oxygen ratio when the $CO_2$ feeding flow rate was larger than 15 lpm. The CO emission is varied by changing the $CO_2$ feeding flow rate but the CO emission characteristics is highly affected by excess oxygen ratio. When the excess oxygen ratio is below $\lambda=1.1$, the CO emission increased as the $CO_2$ feeding flow rate increased.