• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.353-359
• /
• 1988

In this paper, the design and implementation of a multi-processor based die bonder machine for the semiconductor will be described. This is a final research results carried out for two years from June, 1986 to July, 1988. The mechanical system consists of three subsystems such as bonding head module, wafer feeding module, and lead frame feeding module. The overall control system consists of the following three subsystems each of which employs a 16 bit microprocessor MC 68000 : (i) supervisory control system, (ii) visual recognition / inspection system and (iii) the display system. Specifically, the supervisory control system supervises the whole sequence of die bonder machine, performs a self-diagnostics while it controls the bonding head module according to the prespecified bonding cycle. The vision system recognizes the die to inspect the die quality and deviation / orientation of a die with respect to a reference position, while it controls the wafer feeding module. Finally, the display system performs a character display, image display ans various error messages to communicate with operator. Lead frame feeding module is controlled by this subsystem. It is reported that the proposed control system were applied to an engineering sample and tested in real-time, and the results are sucessful as an engineering sample phase.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.248-251
• /
• 2007

블로우다운 산화제 공급 방식은 부품 수가 적어 신뢰도가 높고, 별도의 가압 탱크가 존재하지 않아 발사체의 총 중량을 감소시킨다는 측면에서 효과적이지만, 일정한 추력 성능을 보장하지 않는 단점을 내재하고 있다. 따라서 본 연구에서는 각 부품의 수학적 모델링을 통해 블로우다운 산화제 공급방식 하이브리드 로켓의 성능 해석 모델을 제안하여, 고유의 성능 특성에 대하여 고찰하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.272-273
• /
• 2015

This paper analyze scenario of feeder wire fault that occurs in the AC feeding system considering train position. The fault location of AC feeding system is calculated by measuring impedance. However, in this way, estimation error can be occurred because of tie connection, boosting current, etc. Therefore, it's hard to find fault location, so that it is required to detailed circuit analysis according to fault location. We analyze the short circuit impedance values with respect to feeder wire fault according to a train position. In this paper, PSCAD is used for modeling and analysis of AC railway feeding system.

• 한국자동차공학회논문집
• /
• 제4권1호
• /
• pp.86-95
• /
• 1996

This study was on the pollution emissions of the Ultrasonic fuel feeding system in gasoline injection vehicle. This work measured th SMD of the fuel, and compared the characteristics through chassis dynamometer and highway road test by the conventional vehicle. And this work measured vacuum degree, turbulence intensity and the rate of fuel consumption according to intake air velocity with swirler. The results are as followed; The effects of the vehicle installed the ultrasonic fuel feeding system are better than those of the conventional vehicle.

• 대한가정학회지
• /
• 제33권2호
• /
• pp.151-157
• /
• 1995

This is a study on types of foodservice system, the menu, role of the Dietitian, management of the facilities and utensil through the survey conducted at 105 enterprises located in Seoul industrial foodservices which were evenly divided into three groups ; large size of feeding group, medium size of feeding group, small size of feeding group. The sresults are below, 1. Most institutional foodservice was enterprise under direct management. 2. Selective menu was set for the large size of feeding group than small size of feeding group. At budget making, personal management and purchansing management, the dietition role was not important in the large size of feeding group than in the small size of feeding group. 3. Equipped rate of facilities and utensil were greater volume for the large size of feeding group.

• 유변학
• /
• 제11권2호
• /
• pp.97-104
• /
• 1999

본 연구에서는 전기장의 인가 유무에 따라 유체의 유변성질이 가역적으로 변화하는 ER(electro-rheological) 유체를 이용하여 CD-ROM(compact disc-read only memory) 마운트를 구성한 후 피딩 시스템의 진동제어를 수행하였다. 이를 위하여 우선 특수화학처리된 전분계 ER유체를 조성하였으며, 전단모드 및 유동모드하에서 전기장에 따른 항복응력을 실험적으로 도출하였다. 도출된 ER유체의 항복응력에 근거하여 복합모드형 CD-ROM 마운트를 설계, 제작하였다. 제작된 ER CD-ROM 마운트의 진동절연 특성을 주파수 영역에서 고찰하였으며 기존의 고무마운트 성능과 비교하였다. 나아가서 제안된 마운트를 장착한 정보저장기기 드라이브 피딩 시스템의 동적 모델링을 수행하였으며, 진동제어를 위한 스카이훅 제어기를 설계하였다. 컴퓨터 시뮬레이션을 통하여 여러 외란(가진) 조건에 따른 피딩 시스템의 진동제어 성능을 주파수 및 시간 영역에서 고찰하였다.

• 한국기계가공학회지
• /
• 제17권1호
• /
• pp.23-33
• /
• 2018

In the general manual feeder of an LED lighting assembly system, many workers are needed to supply parts to the main conveyor. The automatic feeder for modern automation lighting assembly systems consists of a completely automated feeding system and a magazine system that supplies the parts automatically. A standardized LED panel and diffusion cover is stacked in the cartridge of the magazine system. The structural safety of the automatic feeding system with regard to handling the load from the panels and covers stored in the cartridge should be guaranteed. LED convergency lighting modules are assembled using two LED panels and one diffusion cover in an automatic feeder. In this study, the structural safety and fatigue life of the automatic feeder and magazine were analyzed by considering the load generated in the automatically assembled LED convergency lighting system. In addition, the dynamic behavior of each auto-feeding system and magazine delivery system was visualized, and the working process was evaluated via dynamic simulation using a virtual engineering method. A tack time table for automatic feeding systems was derived by developing a virtual prototype.

• 대한영양사협회학술지
• /
• 제3권2호
• /
• pp.169-181
• /
• 1997

In this study, I made researches of 510 mothers who breed their infants in total (256 boys & 254 girls), among which 410 in urban area and 100 in the rural area, as an object of the investigation so as to make an intensive examination and analysis of the actual state of feeding nutritive method, grasp several related factors, and finally suggest the elementary data for both campaign encouraging breast feeding and the infant feeding education. 1. Mothers showed the meaningful local differences as in an education and income level at 1% and as in a delivery type at 5%. 2. To have decided the feeding conditions according to the residences by the Kaup index distribution (P<0.05) resulted in a meaningful difference according to regions and also made us be more thoughtful of the overnutrition in the urban area than in the rural area, and it didn't showed a meaningful difference the nutritive state according to the infant feeding method thought desirable (P<0.01). 3. The feeding methods consist of breast feeding at 21.8%, artificial feeding at 48.8%, and the mixed one at 29.4%. As for the feeding method thought desirable, breast feeding was 52%. Even though they were thinking that breast feeding is better, the breast feeding case didn't go beyond 32.5% only and as for the actual feeding methods it showed a meaningful difference according to the feeding method thought desirable (P<0.01). 4. Regarding the reasons why they chose breast milk, it was 64%, the most because mother's milk contains the immune system, 63.1% for the baby's health, 52.3% because of its most because breast milk is of little quantity, 37.8% because of the mother's occupation, 14.1% because they have fed the baby artificially from the beginning and so on. Considering the reasons why they chose the mixed feeding, it was 70.7%, the most because the amount of breast milk a little, 27.3%, the next one, because of the mother's occupation and so on. 5. The respondents who answered that how to increase the number of breast feeding population depends on the reinforcement of breast feeding education for the women were 190 (37.3%), the most among all 150 persons and those who had the opinion that they should spread and actualize the temporary childcare rest (from office) system for the women who have jobs were the secondly most, 107 (21%).

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2001년도 춘계학술대회
• /
• pp.267-268
• /
• 2001

• 한국정밀공학회지
• /
• 제20권5호
• /
• pp.22-28
• /
• 2003