• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.1
• /
• pp.10-15
• /
• 2004

We present a state-space approach to make non-square linear systems strictly passive by using an input-dimensional parallel feedforward compensator. A necessary and sufficient condition for the existence of the parallel feedforward compensator is given by the static output feedback formulation, which enables to utilize linear matrix inequality. By modifying the structure of the compensator the additional technical assumption in the previous result [1] is removed. The effectiveness of the proposed method is illustrated by some numerical examples which can be stabilized by the proportional-derivative (PD) and proportional-derivative-integral (PID) control laws. The proposed control scheme can successfully replace the measurements of derivative terms in the control laws.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1996.10a
• /
• pp.319-322
• /
• 1996

Automatic gauge control algorithm in rolling process is composed of several functions. Among them feedforward control method is used to compensate irregularity of input strip thickness before rolling process. Since it's very difficult to get an explicit relation between the degree of irregularity of input strip and manipulated variables, approximate linear equation like straight line is used in real system. Furthermore parameters included in such static equation should be changed by characteristics of input strip and modified by roll states. Despite this problem, rolling process use variables in feedfroward controller as a constant. Therefore this problem increases the possibilities of irregularity of thickness control. This paper presents an algorithm which can properly infer present states of process and intelligently manipulate the parameter of feedforward controller.

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.1
• /
• pp.28-33
• /
• 2007

최근 Hard Disk Drive(HDD)는 컴퓨터 산업의 발달과 함께 멀티미디어 어플리케이션의 요구에 따라 대용량화 추세에 있다. 이러한 대용량 HDD 는 고밀도, 고정밀의 track 정보가 필요하게 되고, 이는 HDD 생산에 고속, 고정밀의 Servo Track Writer(STW)를 필요로 하게 되었다. 그러나, 기존의 STW 는 PID 제어기에 공진 모드 제거를 위한 notch filter 를 사용하기 때문에 고속화에는 한계가 있어 track 정보를 기록하는 생산시간의 단축이 어렵다. 본 논문에서는 이를 위하여 기존의 STW 에 공진 모드의 여기를 최소화하기 위해 제어 입력의 profile 을 설계하는데 convex optimization 을 이용한 최적화 기법을 사용하였다. 이렇게 설계된 제어 입력은 플랜트의 공진 모드가 존재하는 주파수 대역에 에너지를 최소화시켜 공진 모드의 영향을 적게 받는다. 그 결과로 빠른 settling time 과 위치 정밀도가 향상된다. 그 효과는 모의 실험을 통해 검증하였다.

• Journal of IKEEE
• /
• v.17 no.1
• /
• pp.83-88
• /
• 2013

This paper presents the output feedback control design for feedforward nonlinear systems with input and output delay. The proposed output feedback controller is composed of a linear observer and a linear controller. It is shown that by using Lyapunov-Krasovskii theorem, the proposed controller ensures a global asymptotic stability for arbitrarily large delay. Finally, an illustrative example is given in order to show the effectiveness of our design method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.11
• /
• pp.2049-2055
• /
• 2011

In this paper a new current control method is proposed for the discontinuous conduction mode of boost converter. The proposed method using a current gain feedforward compensation adjusts a measured inductor current value and then, calculated an average current precisely in the discontinuous conduction mode as well as continuous conduction mode. By applying the proposed method, the current measurement error is significantly reduced to 2% regardless of the operating points. The proposed method is analyzed and its performance is investigated in simulation. To verify the feasibility of the proposed scheme, a 10kW 3-phase interleaved boost converter was built and experimental results are matched to the simulation results.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.261-264
• /
• 1993

This paper proposes an adaptive generalized predictive control with feedforward algorithm for steam generator level control in nuclear power plant. The proposed algorithm is shown that the parameters of N-step ahead predictors can be obtained using the parameters of one-step ahead predictor which is derived from plant model with feedforward. Using this property the proposed scheme is an adaptive algorithm which consists of GPC method and the recursive least squares algorithm for identifying the parameters of one-step ahead predictor. Also, computer simulations are performed to evaluate the performance of proposed algorithm using a mathematical model of PWR steam generator Simulation results show good performances for load variation. And the proposed algorithm shows better responses than PI controller does.

• The Journal of Korea Robotics Society
• /
• v.11 no.2
• /
• pp.92-99
• /
• 2016

An electro-hydraulic actuator (EHA) is widely used in industrial motion systems and the increasing bandwidth of EHA position control is important issue. The model-inverse feedforward controller is known to extend the bandwidth of system. When the system has non-minimum phase (NMP) zeros, direct model inversion makes system unstable. To overcome this problem, an approximate model-inverse method is used. A representative approximate model inversion method is zero phase error tracking control (ZPETC). However, if zeros locate right half plane of z-plane, the approximate inverse model amplifies the high-frequency response. In this paper, to solve the problem of ZPETC, an adaptive model-inverse control is proposed. The adaptive algorithm updates feedforward term in real-time. The effectiveness of the proposed adaptive model-inverse position control strategy is verified by comparison with typical proportional-integral (PI) control and feedforward control by experiments. As a result, the proposed adaptive controller extends the bandwidth of EHA position control.

• Journal of Power Electronics
• /
• v.15 no.4
• /
• pp.1066-1073
• /
• 2015

This paper proposes a control strategy based on the frequency detection method, comprising a current control and a feed-forward voltage control loop, is proposed for grid-interactive power conditioning systems (PCS). For continuous provision of power to critical loads, PCS should be able to check grid outages instantaneously. Hence, proposed in the present paper are a frequency detection method for detecting abnormal grid conditions and a controller, which consists of a current controller and a feedforward voltage controller, for different operation modes. The frequency detection method can detect abnormal grid conditions accurately and quickly. The controller which has current and voltage control loops rapidly helps in load voltage regulation when grid fault occurs by changing reference and control modes. The proposed seamless transfer control strategy is confirmed by experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.736-739
• /
• 1997

In recent years, there has been a renewed interest in the BLDC motor as a research subject. In this paper we inspect sources of the torque ripple, which is one of the elements causing performance depreciation of BLDC motors. Based on the inspected sources of the torque ripple, feedforward compensation methods are proposed to reduce the size of torque ripple. The effectiveness of the proposed methods is verified with experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.151.2-151
• /
• 2001

In this paper, the design of a two-degree-of-freedom(TDF) controller is proposed to track the reference model, as well as to reject an influence of measurable disturbance for descrpitor system. The TDF controllers based on the Youla parametrization reveals that the design of the feedforward controller and the regulator can be done independently. First, to solve this problem, we will change descriptor system into regular state space system using a state feedback. And then, the feedforward controller is determined by solving a full information approach for augmented system with a nominal control constraint, and the regulator is designed by means of the loop-Shaping method.