• 한국군사과학기술학회지
• /
• 제21권4호
• /
• pp.508-519
• /
• 2018

This paper concerns on stabilization control of a gyro-stabilized 2-axes gimbal system which is mounted on a moving vehicles such as automobiles, armored vehicles, ships, flying vehicles, etc. A target image acquisition system is attached on the inner gimbal, and the gimbal systems are required to retain high stabilization accuracy in the absolute coordinate in order to provide fine target image while vehicle is moving. The stabilization control performance is hardly depended upon disturbance rejection ability of control, and disturbance feedforward compensation is effective because feedforward compensation reduce the amount of disturbance before the disturbance disturbs the systems. This paper suggests an experimental method which can estimate system parameters and disturbance torques by using 3-axes accelerometer mounted on the inner gimbal. Furthermore, a simple disturbance identification method which can be applied to any slanted base conditions has been suggested to identify mass unbalance vector and friction torques of each gimbal simultaneously. By using the estimated parameters, a feedforward compensation has been applied to the gyro-stabilized 2-axes gimbal system. The experimental results showed that the feedforward compensation based on the identification method suggested is effective to improve stabilization performances.

• 산업기술연구
• /
• 제20권B호
• /
• pp.175-182
• /
• 2000

In this paper, a novel speed control strategy using an acceleration feedforward compensation by the estimation of the system inertia is proposed. With the proposed method, the enhanced speed control performance can be achieved and the speed response against the disturbance torque can be improved for the vector-controller induction motor drive systems in which the bandwidth of the speed controller cannot be made large enough. The experimental results confirm the validity of the proposed strategy.

• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1833-1842
• /
• 2016

In grid-connected converter control, grid voltage feedforward is usually introduced to suppress the influence of grid voltage distortion on the converter's grid-side AC current. However, owing to the time-delay in control systems, the suppression effect of the grid voltage distortion is seriously affected. In this paper, the positive effects of the grid voltage feedforward control are analyzed in detail, and the time-delay caused by the low-pass filter (LPF) in the voltage filtering circuits and digital control are summarized. In order to reduce the time-delay effect on the performance of the feedforward control, a voltage feedforward control strategy with time-delay compensation is proposed, in which, a leading correction of the feedforward voltage is used. The optimal leading step used in this strategy is derived from analyzing the phase-frequency characteristics of a LPF and the implementation of digital control. By using the optimal leading step, the delay in the feedforward path can be further counteracted so that the performance of the feedforward control in terms of suppressing the influence of grid voltage distortion on the converter output current can be improved. The validity of the proposed method is verified through simulation and experiment results.

• 전자공학회논문지 IE
• /
• 제45권3호
• /
• pp.36-41
• /
• 2008

실제 프로세스 제어 중의 3개의 탱크 액체가 이 결합 시스템을 통제하는 작업 원리에 근거하여 두 개의 입력과 두 개의 출력 시스템의 수학적 모델을 제시하였다. 귀로 사이의 결합 작용을 한 종류의 형식의 요소로 간주하고 Feedforward 보상에 근거하여 정형화한 형태의 통제 분리 방법을 제시하였다. 그리고 두 개의 입출력 결합 시스템에 대해 통제 분리를 진행하고 마지막으로 프로그래밍을 통해 이 통제 분리 프로세스의 실험을 수행하였다. 또한 시뮬레이션 결과는 그 방법이 양호한 통제 분리 효과를 얻을 수 있다는 것을 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.68-71
• /
• 1988

The purpose of this paper is to compare with the simulated results of two control algorithms control algorithm in the real time, based upon the model. These control schemes are "Computed-torque" and "Feedforward-Dynamics compensation", and have been simulated on the CMU DD Arm II.

• 전력전자학회논문지
• /
• 제26권1호
• /
• pp.46-52
• /
• 2021

This study proposes a feedforward compensation control method to reduce 120 Hz output voltage ripple in a single-phase AC/DC rectifier system composed of PFC and LLC resonant converters. The proposed method compensates for the voltage ripple of the DC-link by using the AC input and DC output power difference, and then reduces the final output voltage ripple component of 120 Hz through feedforward compensation based on the linearized frequency gain curve of the LLC resonant converter. Through simulation and experimental results, the validity of the ripple reduction performance was verified by comparing the conventional PI controller and the proposed feedforward compensation method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.736-739
• /
• 1997

In recent years, there has been a renewed interest in the BLDC motor as a research subject. In this paper we inspect sources of the torque ripple, which is one of the elements causing performance depreciation of BLDC motors. Based on the inspected sources of the torque ripple, feedforward compensation methods are proposed to reduce the size of torque ripple. The effectiveness of the proposed methods is verified with experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.24-24
• /
• 2000

This paper proposes a design method of sliding mode observer for SISO linear systems with a disturbance input. We first construct an observer with a constant gain matrix, a feedforward injection map and an external feedforward compensation signal input. Using the second Lyapunov method, we present a sufficient condition for the existence of sliding mode observer. The proposed observer guarantees that the state error trajectories enter a certain region in finite time and remain inside thereafter.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.83-91
• /
• 2004

This paper illustrates the feasibility and the effectiveness of the disturbance feedforward compensation control proposed in the previous paper. The compensator is designed experimentally by means of the Multiple Filtered-x Least Mean Square algorithm. A 2-DOF active magnetic bearing system subject to base motion is built and the compensation control is applied. The experimental results demonstrate that the compensation control reduces the air-gap responses within 10$%$ of those by the feedback control alone without increasing the control inputs.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제14권1호
• /
• pp.26-33
• /
• 2014

This study addresses the control problem of an unmanned aerial vehicle (UAV) during the transition period when the flying mode changes from hovering to translational motion in the horizontal plane. First, we introduce a compensation algorithm that improves height stabilization and reduces altitude drop. The main principle is to incorporate pitch and roll measurements into the feedforward term of the altitude controller to provide a larger thrust force. To further improve altitude control, we propose the fuzzy logic controller that improves system behavior. Simulation results presented in the paper highlight the effectiveness of the proposed controllers.