• Journal of Communications and Networks
• /
• v.15 no.6
• /
• pp.589-600
• /
• 2013

In this paper, we propose a new feedback scheme called mode selection-based feedback by scheduling probability prediction (SPP-MF) for channel state feedback in OFDMA downlink system. We design the scheme such that it determines the more desirable feedback mode among selective feedback by scheduling probability prediction (SPP-SF) mode and bitmap feedback by scheduling probability prediction (SPP-BF) mode, by calculating and comparing the throughputs of the two modes. In both feedback modes, each user first calculates the scheduling probability of each subchannel (i.e., the probability that a user wins the scheduling competition for a subchannel) and then forms a feedback message based on the scheduling probability. Specifically, in the SPP-SF mode, each user reports the modulation and coding scheme (MCS) levels and indices of its best S subchannels in terms of the scheduling probability. In the SPP-BF mode, each user determines its scheduling probability threshold. Then, it forms a bitmap for the subchannels according to the scheduling probability threshold and sends the bitmap along with the threshold. Numerical results reveal that the proposed SPP-MF scheme achieves significant performance gain over the existing feedback schemes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.466-471
• /
• 1994

To make a dynamic system a given desired motion trajectory, a new feedback error learning scheme is proposed which is based on the repeatability of dynamic system motion. This method is composed of feedforward and feedback control laws. A benefit of this control scheme is that the input pattern that generates the desired motion can be formed without estimating the physical parameters of system dynamics. The numerical simulations show the good performance of the proposed scheme

• Proceedings of the KIPE Conference
• /
• 2001.12a
• /
• pp.115-118
• /
• 2001

This paper presents a new sensorless control scheme using simple duty signal feedback technique in DC-DC converters. The proposed sensorless control scheme (DFC) has the characteristics that they show the same as operation performance of current mode control by using duty feedback technique without current sensor as well as present better dynamic response performance than conventional sensorless current mode control (SCM) in case that input source is perturbed by step change or DC input source includes the . harmonics. Also, the proposed control scheme has good noise immunity and simple control circuits since they have one feedback loop, and can be applied to all DC-DC converters. The concept and control principles of the proposed control scheme are explained in detail and the validity of the proposed control scheme is verified through several interesting simulated results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1253-1256
• /
• 1996

In this paper, a new nonlinear feedback linearization control scheme for induction motors is developed. The control scheme employs a fuzzy nonlinear identification scheme based on fuzzy basis function expansion to adoptively compensate the parameter variations, i.e. rotor resistance, mutual and self inductance etc. An important feature of the proposed control scheme is to incorporate the sliding mode controller into the scheme to speed up convergence rate. Simulation tests show the robust behavior of the proposed controller in the presence of the parameter uncertainties of the machine.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.787-793
• /
• 2015

In order to support reliable medium access control (MAC) layer multicast services in Broadband Wireless Access (BWA) networks, we here propose spreading codes (Cumulative ACK (CA) code and ARQ Feedback Request (AFR) code) based reliable multicast feedback scheme. The status indications based on the automatic repeat request (ARQ) mechanism are needed in some multicast services. In accordance with various wireless channel environments, we demonstrate the performance excellency of our proposed scheme with respect to required uplink resources compared with the original feedback scheme based on unicast ARQ feedback messages. In addition, we analyze packet error rate (PER) against the various wireless channel environments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.4
• /
• pp.692-710
• /
• 2013

Conventional interference alignment (IA) for a MIMO interference channel (IFC) requires global and perfect channel state information at transmitter (CSIT) to achieve the optimal degrees of freedom (DoF), which prohibits practical implementation. In order to alleviate the global CSIT requirement caused by the coupled relation among all of IA equations, we propose an IA scheme with a single feedback link of each receiver in a limited feedback environment for a three-user MIMO IFC. The main feature of the proposed scheme is that one of users takes out a fraction of its maximum number of data streams to decouple IA equations for three-user MIMO IFC, which results in a single link feedback structure at each receiver. While for the conventional IA each receiver has to feed back to all transmitters for transmitting the maximum number of data streams. With the assumption of a random codebook, we analyze the upper bound of the average throughput loss caused by quantized channel knowledge as a function of feedback bits. Analytic results show that the proposed scheme outperforms the conventional IA scheme in term of the feedback overhead and the sum rate as well.

• Journal of Power Electronics
• /
• v.9 no.2
• /
• pp.288-299
• /
• 2009

This paper proposes a feedback linearization control scheme of AC/DC PWM converters with LCL input filters using no damping resisters. Feedback linearization techniques use a transformation from nonlinear system models into equivalent linear models in a simpler form. The feedback linearization scheme in this work has cascade structures unlike usual feedback linearization, therefore it has an advantage that it is possible to limit the capacitor current to a certain level. The performance of the proposed controller is validated with simulation and experimental results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.1
• /
• pp.108-122
• /
• 2014

Massive antenna array is an attractive candidate technique for future broadband wireless communications to acquire high spectrum and energy efficiency. However, such benefits can be realized only when proper channel information is available at the transmitter. Since the amount of the channel information required by the transmitter is large for massive antennas, the feedback is burdensome in practice, especially for frequency division duplex (FDD) systems, and needs normally to be reduced. In this paper a novel channel feedback reduction scheme based on the theory of distributed compressive sensing (DCS) is proposed to apply to massive antenna arrays with spatial correlation, which brings substantially reduced feedback load. Simulation results prove that the novel scheme is better than the channel feedback technique based on traditional compressive sensing (CS) in the aspects of mean square error (MSE), cumulative distributed function (CDF) performance and feedback resources saving.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.29-38
• /
• 1998

This ppaer suggests a congestion control scheme for CL(ConnectionLess) overlay network using the feedback loops getween CL werver, between CL servers, and the header translation table of CL server. The CL overlay network for CBDS(Connectionless Broadband Data Service) defined by ITU0T(International Telecommunication Union-Telecommunication) consists of CL servers which route frames and links which connect between CL user and CL server or between CL servers. In this CL overlay network, two kinds of congestions, link congestion and CL server congestion, may occur. We suggest a scheme that can solve the congestion using ABR(Available Bit Rate) feedback control loop, the traffic control mechanism. This scheme is the link-by-link method suing the ABR feedback control loops between CL user and CL server or between CL servers, and the header translation table of CL server. As CL servers are always endpoints of ABR connections, the congestion staturs of the CL server can be informed to the traffic sources using RM(Resource Management) cell of the ABR feedback loops. Also CL server knows the trafffic sources making congestion by inspecting the source address field of CLNAP-PDUs(ConnectionLess Network Access Protocol - Protocol Data Units). Therefore this scheme can be implemeted easily using only both ABR feedback control loop of ATM layer and the congestion state table using the header translation table of CL server because it does not require separate feedback links for congestion control of CL servers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.12
• /
• pp.1208-1218
• /
• 2012

Disseminating broadcast information stably and reliably in IEEE 802.11-like CSMA wireless networks requires that a source should seek collision-free transmission to multiple receivers and keep track of the reception state of the multiple receivers. We propose a simple yet efficient feedback scheme for stable reliable broadcast in wireless networks, called 2-polling feedback, where the state of two receivers are checked by a source before its broadcast transmission attempt We present a performance analysis of the class of reliable broadcast feedback schemes in terms of two performance metrics (packet transmission delay and packet stable time). The analysis results show that the proposed 2-polling feedback scheme outperforms the current existing classes of feedback schemes in the literature, i.e., all-polling feedback and 1-polling feedback. The 2-polling feedback scheme has lower asymptotic complexity than the all-polling feedback, and has the same asymptotic complexity as the 1-polling feedback but exhibits almost 50 % reduction in packet stable time.