• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.256-259
• /
• 1987

In this paper, a servo controller for a robot manipulator is developed. It consists of a conventional MRAS controller for each joint together with a feedback control to Dynamics compensation. To generale the control torque effectively a currant drive method is adopted. The speed of the actuator is measured by using a tachometer and the position of the link is measured by using a potentiometer. To show the effectiveness of the proposed control algorithm the proposed controller is tested in real time.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.6
• /
• pp.600-606
• /
• 1992

The series connection of power switching semiconductor elements is essential when a high voltage converter is made, so researches are being conducted to further develop this technology. In the series connection of power switching semiconductor elements, the main problem is that simultaneous conduction at turn-on and simultaneous blocking at turn-off together with voltage balancing are unattainable because of the difference of their switching characteristics. In this paper a novel series connection algorithm is proposed, which can implement not only the synchronization of the points of turn-on and turn-off time but the dynamic voltage balancing in spite of the difference of each switching characteristics. The proposed method is that the compensated control signal is attained from the voltage feedback signal and applied to the series-connected power transistors independently. Computer simulation and experimental results verify its validity.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2061-2063
• /
• 2003

This paper presents a method to compensate the drift of solid-state inertial sensors for control applications. A solid-state gyroscope is evaluated via both theoretical and experimental analyses. From the analytical results, a heuristic compensation method for the drift of the gyroscope is proposed. Experimental results on inverted pendulum control show that the proposed method is feasible since compensated signals from the gyroscope are successfully used in the feedback loop to control the inverted pendulum system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.05a
• /
• pp.383-388
• /
• 1998

이동통신에서, 신호의 페이딩을 보상하기 위하여 pilot symbol assisted modulation(PSAM)에 대한 많은 연구가 진행 되어왔다. 본 논문에서는 최대비합성다이버시티를 사용하는 PSA-QAM에서 전력증폭기 비선형성의 효과를 분석하였다. 먼저, PSAM성능의 한계를 구하기 위하여, 페이딩에 대한 완벽한 정보가 주어진 상태에서 최대비합성다이버시티를 갖는 QAM의 이론적 성능을 분석하였다. 실제 PSAM에서, 페이딩에 대한 정보는 파일럿 심볼의 보간에 의하여 얻어진다. 오차의 평균전력을 최소화하는 보간필터를 사용하여 필터의 탭수, 파일럿 심볼프레임 주기, 도플러 주파수가 성능에 미치는 영향을 분석하였다. 비선형 전력증폭기 AB, B, C급의 AM/AM, AM/PM 특성을 성능분석에 고려하였다. 비선형 보상기술인 Cartesian Feedback Loop (CFB) 이용하여 AWGN 채널과 Rayleigh 페이딩 채널에서 비선형 전력증폭기 종류에 따른 성능변화를 나타내었다.

• Journal of Power Electronics
• /
• v.13 no.6
• /
• pp.991-999
• /
• 2013

In this paper, a fast transient buck converter using hysteresis PWM control is presented. The proposed control method is based on hysteresis control of the capacitor C voltage. This offers a faster transient response to meet the challenges of the power supply requirements for fast dynamic input and load changes. It also provides better stability and solves the compensation problem of the error amplifier in conversional voltage PWM control. Finally, the steady-state and dynamic operation of the proposed control method are analyzed and verified by simulation and experimental results.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.770-772
• /
• 1993

This paper is a study of a reactive-power compensator. It make using Power-MOSFET that be little quantity driving-power, easy to control, and be passible to highspeed wich be capable to achieve a reactive power compensator, to get rid of harmonics. On account of having no particular control circuit, composing not need to energy storage element and feedback control compered the previous power transformer in the system organization. It efficiqntly ueed to be in power factor compensation variable load.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.864-867
• /
• 2003

In this study, a controller which has a feedforward controller and two additional PI integrators was designed. But if a controller is used by only the integration of a feedforward controller and two additional PI integrators, the capability of a controller will decrease because the decoupling terms of current is feedback as the disturbance. Therefore the feedforward method with the decoupling compensation was proposed. The two additional PI integrators were replaced by two decoupling terms to simplify the calculation. The simulation and experimental using SynRM driving system were performed to verify the design of a improved decoupling feedforward controller.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.1
• /
• pp.1-12
• /
• 1991

In this paper the design and construction of discrete model following servo dontroller on the position control system is proposed. The operational time delay of the plant in the controller which is proposed, is considered and the system which is added by the integral compensation in first order difference equation is constructed. By applying the optimal regulator method to the system, the method which find the optimal state feedback gain is developed theoretically. The output of a model which is correspond to a DC Servo motor follow quickly the speed response of a DC Servo motor and the velocity error in ansteady-state is reduced in zero and the position response is controlled correctly, the performance of the controller is contoller is confirmed by Computer Simulation.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.181-182
• /
• 2018

본 논문에서는 전압 피드백 보상에 의한 동적 과변조 기법의 성능 향상 방법을 제안한다. 전동기 구동 시스템에서 인버터는 선형 변조 영역에서 동작할 경우 단순히 전압 이득이 1인 전압 증폭기로 볼 수 있다. 그러나 과변조 영역에서는 기존의 동적 과변조 기법 적용 시 지령 전압에 대한 인버터 출력 전압의 비선형성으로 인해 전압 이득이 1보다 작아진다. 따라서 과변조 성능이 저하되는데 본 논문에서는 제한된 전압을 피드백 보상하여 과변조 성능을 향상시켰다. 이로 인해 구동 전동기의 출력 토크 성능 및 전류 제어 동특성이 향상될 수 있다. 제안된 방법을 800W PMSM(Permanent Magnet Synchronous Motor)의 약자속 제어에 적용하여 그 효용성을 확인하였다.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.2_2
• /
• pp.193-198
• /
• 2022

In this paper, we introduce the improved control method are communicated between a master and a slave robot in the teleoperation systems. When the master and slave robots are located in different places, time delay is unavoidable under the network environment and it is well known that the system can become unstable when even a small time delay exists in the communication channel. The time delay may cause instability in teleoperation systems especially if those systems include haptic feedback. This paper presents a control scheme based on the estimator with virtual master model in teleoperation systems over the network. As the behavior of virtual model is tracking the one of master model, the operator can control real master robot by manipulating the virtual robot. And LQG/LTR scheme was adopted for the compensation of un-modeled dynamics. The approach is based on virtual master model, which has been implemented on a robot over the network. Its performance is verified by the computer simulation and the experiment.