• Korean Journal of Poultry Science
• /
• v.34 no.1
• /
• pp.53-56
• /
• 2007

An experiment was conducted to investigate the effect of ME and crude protein (CP) content of diet on the performance and production cost of white semibroiler chickens. Three hundred sixty hatched white semibroiler chickens (Hy-Line $female\;{\times}\;Ross^{(R)}$ male) were assigned to low dietary treatments of different metabolizable energy (ME) value and crude protein (CP) content: T1; ME 3,040 and 3,070 kcal/kg, CP 21.40 and 20.86%, T2; ME 2,950 and 3,000 kcal/kg, CP 20.62 and 19.70%, T3; ME 2,950 and 3,000 kcal/kg, CP 19.90 and 18.70% and T4; ME 2,900 and 2,920 kcal/kg, CP 18.50 and 18.00% for starter diet ($0{\sim}1st$ wk) and power diet ($2{\sim}5th$ wk), respectively There were significant (P<0.01) differences among treatments in weight gain, feed intake and feed conversion ratio. T1 was significantly higher in weight gain and feed intake and love. in feed conversion ratio than other treatments. Production index of T1 (153.42) was far greater than T2 (112.13), T3 (108.40) and T4 (100.95). It was concluded that semibroilers required similar ME and CP to those of regular commercial broilers (highbro).

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.427-428
• /
• 2004

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.265-277
• /
• 2003

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.7
• /
• pp.1006-1013
• /
• 2015

Heat-stress remains a costly issue for animal production, especially for poultry as they lack sweat glands, and alleviating heat-stress is necessary for ensuring animal production in hot environment. A high ${\gamma}$-aminobutyric acid (GABA)-producer Lactobacillus strain was used to investigate the effect of dietary GABA-producer on laying performance and egg quality in heat-stressed Hy-line brown hens. Hy-Line brown hens (n = 1,164) at 280 days of age were randomly divided into 4 groups based on the amount of freeze-dried GABA-producer added to the basal diet as follows: i) 0 mg/kg, ii) 25 mg/kg, iii) 50 mg/kg, and iv) 100 mg/kg. All hens were subjected to heat-stress treatment through maintaining the temperature and the relative humidity at $28.83{\pm}3.85^{\circ}C$ and 37% to 53.9%, respectively. During the experiment, laying rate, egg weight and feed intake of hens were recorded daily. At the 30th and 60th day after the start of the experiment, biochemical parameters, enzyme activity and immune activity in serum were measured. Egg production, average egg weight, average daily feed intake, feed conversion ratio and percentage of speckled egg, soft shell egg and misshaped egg were significantly improved (p<0.05) by the increasing supplementation of the dietary GABA-producer. Shape index, eggshell thickness, strength and weight were increased linearly with increasing GABA-producer supplementation. The level of calcium, phosphorus, glucose, total protein and albumin in serum of the hens fed GABA-producing strain supplemented diet was significantly higher (p<0.05) than that of the hens fed the basal diet, whereas cholesterol level was decreased. Compared with the basal diet, GABA-producer strain supplementation increased serum level of glutathione peroxidase (p = 0.009) and superoxide dismutase. In conclusion, GABA-producer played an important role in alleviating heat-stress, the isolated GABA-producer strain might be a potential natural and safe probiotic to use to improve laying performance and egg quality in heat-stressed hens.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.10
• /
• pp.1386-1390
• /
• 2009

A dose-response experiment with five lysine levels (0.65, 0.80, 0.95, 1.10, and 1.25%) was conducted to evaluate the lysine requirement of male White Pekin ducklings from 7 to 21 days of age. Two hundred and eighty, 7-day-old, male White Pekin ducklings were allocated to 5 experimental treatments, each containing 8 replicate pens with 7 birds per pen. Feed and water were provided ad libitum from 7 to 21 days of age. At 21 days of age, weight gain, feed intake, feed/gain, breast meat weight, and breast meat yield relative to body weight of ducklings from each pen were all measured. As dietary lysine level increased, weight gain, feed intake, feed/gain, breast meat weight, and breast meat yield of ducklings were all improved significantly (p<0.05). According to broken-line regression analysis, the lysine requirement of male White Pekin ducklings from 7 to 21 days of age for weight gain, feed/gain, breast meat weight, and breast meat yield was 0.84, 0.90, 0.97, and 0.98%, respectively. Considering that Pekin duck production is directed to meat production, the lysine requirement of male starter Pekin ducklings during this period is suggested to be 0.98%.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.5
• /
• pp.413-420
• /
• 2009

We propose a novel feed network for a $2{\times}2$ array antenna to form a sectoral conical beam. The proposed feed network, which is a symmetrical structure, consists of four $90^{\circ}$ hybrids, a crossover, and four $90^{\circ}$ delay lines. To verify the performance of the feed network a $2{\times}2$ array antenna and the feed network are fabricated on a microstrip structure, and the radiation patterns are measured at the center frequency of 2.57 GHz. The maximum radiation is measured at the $45^{\circ}$ elevation angle and at the $45^{\circ}$, $135^{\circ}$, $225^{\circ}$, and $315^{\circ}$ azimuth angles depending on the choice of the input port of the feed network.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.634-640
• /
• 2015

This paper deals with the design of a microstrip line feed toppled T shaped microstrip patch antenna that gives dualband characteristics at 4 GHz and 6.73 GHz respectively. The simulation of proposed antenna geometry has been performed using method of moment based IE3D simulation software. A radial basis function neural network (RBFNN) is used for the estimation of bandwidth for dualband at 4 GHz and 6.73 GHz respectively. In RBFNN model, antenna parameters such as dielectric constant, height of substrate, and width are used as input and bandwidth of first and second band is considered as output of the network. To validate the RBFNN output, an antenna has been physically fabricated on glass epoxy substrate. The fabricated antenna can be utilized in S and C bands applications. RBFNN results are found in close agreement with simulated and experimental results.

• Journal of Welding and Joining
• /
• v.15 no.1
• /
• pp.116-124
• /
• 1997

A scope of this study is to establish the optimum plasma spray conditions for fine ($5\mu\textrm{m}$) $Al_2O_3$ powder. However, the flowability of the $Al_2O_3$ powder is not so good because of irregular particle shape and fine particle size. Therefore, powder feeding system was modified by 1) change of powder feeding line material from polymer to copper 2) shorten the powder feeding tube length 3) heating the powder feeding system to $80^{\circ}C$4) vibrating the powder feeding line continuously, in order to feed the fine powder homogeneously. The homogeneous powder feeding conditions were obtained with the modified powder feeding system by controlling the powder carrier gas flow and the powder flow rate indicator. The best plasma spraying conditions for the fine $Al_2O_3$ powder were found out as 40kw gun power, 80 g/min. powder feed rate and 50 mm working distance after characterizing the microstructure, hardness and wear loss of the $Al_2O_3$ coating layer.

• Journal of ILASS-Korea
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2007

The low frequency combustion instability phenomena generated by pressure drop oscillation such as propellant shake in feed line are studied. To generate the flowrate oscillation by the pressure pulsation up to 400Hz without flow discontinuities and cavitations, a hydrodynamic mechanical pulsator of rotating disk type was produced. Injection pressure conditions are 5, 7 and 9 bar and pressure fluctuation frequency conditions are 0, 4, 6 and 8 Hz. When the injection pressure was oscillated by a mechanical pulsator, the spray shape was pulsated regularly. During the pulsated state of the spray with a mechanical pulsator, the spray characteristics, such as spray angle and liquid film thickness in orifice exit, were measured and compared with those in steady state without a mechanical pulsator. Though the mean injection pressure was fixed in the steady and fluctuating state, there were some differences in all measured values, i.e. liquid film thickness and spray cone angle, between both states.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.181-184
• /
• 2002

본 논문에서는 600Hz 무선 LAN 시스템에 탑재를 위한 600㎓ 대역 전력증폭기 모듈을 개발 하였다. 600㎓ 대역 전력증폭기 모듈에 실장된 600㎓ 대역 전력증폭기 MMIC는 ETRI에서 설계 및 제작한 것으로 칩의 크기는 2.80 × 1.75㎟이며, on-wafer측정을 하여 얻은 결과는 동작 주파수 58~620Hz에서 소신호 이득은 12.4dB이고, 최대 소신호 이득은 59~60G보z에서 ISdB이며, 출력전력(Pldn)은 16.3~16.7dBm을 얻었다. 이와 같은 특성을 갖는 전력증폭기 MMIC를 사용하여 모듈을 제작하였으며, RF feed line을 위해 Rogers 사의 R03003 기판을 사용하였다. 모듈의 입출력은 동작 주파수 대역에 적합한 WRl5라는 waveguide 형태를 사용하였고, DC 바이어스 공급을 위해 3.5㎜ K-connector를 사용하였다 제작한 모듈의 크기는 40 × 30 × 15㎣이며, 최적의 성능을 얻고자 tuning bar를 상하로 이동하여 최적점을 찾았으며 나사로 고정하여 상태를 유지하도록 하였다. DC 바이어스 및 RF feed line과 칩의 연결은 본딩에 의한 인덕턴스를 최소화하기 위하여 3mil 두께의 리본 본딩을 하였다 전력증폭기 모듈을 측정한 결과, 동작주파수 600㎓ 대에서 소신호 이득은 6dB 이상, 입력 정합은 -lOdB 이하, 출력 정합은 -4dB 이하로 측정되었긴, 출력전력은 SdBm 이상으로 측정되었다. 동국대에서 제작한 600Hz 무선 LAN 시스템에 전력증폭기 모듈을 시스템 송신부에 탑재 시험한 결과, 동영상을 실시간으로 전송하는데 성공하였다.