• Asian-Australasian Journal of Animal Sciences
• /
• 제6권4호
• /
• pp.591-595
• /
• 1993

A trial involving 200 day-old 288 Shaver chicks in a randomized experimental design tested the effects of using diets based on local feed materials (LF). Commercial imported counterpart feeds (CF) served as control diets. Birds were raised from 0-6 w on Chick Starter feed, from 7-17 w on Pullet Developer feed and from 18 to 72 w on Layer feed. The results obtained indicated that there were no significant differences in the performance of birds fed LF and CF diets during the Chick Starter and Pullet Developer phases. During the Laying phase, there were also no differences in laying percentage, (66 vs 65) and in egg size (62 vs 63 g) between LF and CF diets. Feed cost was lower on LF diet had a better egg yolk colour score, (4 vs 1) than those fed on CF diet. Feed cost was lower on LF than CF diets and the feed cost for producing eggs was approximately 50 percent lower on LF compared to CF (P$ 0.06 vs P$ 0.12). It was concluded that the use of locally available feed resources produces comparable performance to that obtained using commercial imported feeds. Secondly, using local materials markedly reduces feed cost and cost of producing eggs.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권9호
• /
• pp.1262-1275
• /
• 2013

Awamori is produced by fermenting steamed indica rice. Awamori-pressed lees is a by-product of the Awamori production process. Tofu lees is a by-product of the Tofu production process. Research was conducted to test if dried Awamori-pressed lees and Tofu lees can be used as a mixed feed ingredient for raising male goats. Eighteen male kids were divided into three groups of six animals (control feed group (CFG), Awamori-pressed lees mixed feed group (AMFG), Tofu lees mixed feed group (TMFG)). The CFG used feed containing 20% soybean meal as the main protein source, while the AMFG and TMFG used feed mixed with 20% dried Awamori-pressed lees or dried Tofu lees. The groups were fed mixed feed (volume to provide 100 g/d increase in body weight) and alfalfa hay cubes (2.0 kg/d) twice a day (10:00, 16:00). Klein grass hay and water was given ad libitum. Hay intake was measured at 10:00 and 16:00. Body weight and size measurements were taken once a month. At the end of the experiment, a blood sample was drawn from the jugular vein of each animal and the carcass characteristics, the physical and chemical characteristics of loin were analyzed. DCP and TDN intakes in AMFG and TMFG showed no significant difference to the CFG. Cumulative measurements of growth in body weight and size over the 10 mo period in the AMFG and TMFG were similar to the CFG. Blood parameter values were similar to those in normal goats. Dressing carcass weight and percentages, and total weight of meat in the AMFG were similar to that in the CFG, but smaller in the TMFG. The compressed meat juice ratio was higher in both the TMFG and AMFG than the CFG. While the fat in corn, Awamori-pressed lees, and Tofu lees contains more than 50% linoleic acid, the loin fat in both the AMFG and TMFG was very low in linoleic acid due to the increase in the content of oleic acid, stearic acid, and palmitic acid. This indicates that feeding on AMF and TMF does not inhibit hydrogenation by ruminal microorganisms. As in the CFG, the total essential and non-essential amino acids in the loin of the AMFG and TMFG were well balanced. Compared to the CFG, the AMFG and TMFG were high in taurine and carnosine. The results indicate dried Awamori-pressed lees and Tofu lees can be used as a feed ingredient for raising male goats.

• 한국양식학회지
• /
• 제18권3호
• /
• pp.154-159
• /
• 2005

동일연령군의 넙치 치어를 개체 크기별 4개의 group (small group, 체중 $1.3{\pm}0.23g;$ medium group, 체중 $3.1{\pm}0.45g;$ large group, 체중 $4.9{\pm}0.57g;$ ungraded group, 체중 $3.3{\pm}1.66g$)으로 나누어 8주동안 사육하면서 크기 선별이 어류의 성장, 사료효율 및 생존율에 미치는 영향을 조사하였다. 실험종료시 체중의 분포에 따른 소형 개체(체중 10 g)의 빈도는 크기 선별한 small group에 비해 ungraded group에서 매우 높게 나타났다. 실험 전기간동안의 일일성장률은 small group 및 large group에서 각각 최고치 및 최저치를 보였으며, medium group과 선별 group (small group; medium group; large group)의 pooled data는 ungraded group에 비해 높은 수치의 일일성장률을 나타내었다. (P<0.05). 사료섭취율은 ungraded group이 medium group 및 선별 group의 pooled data에 비해 높았던 반면, 사료효율에 있어서는 ungraded group이 이들에 비해 낮게 나타났다(P<0.05). 그리고 ungraded group의 생존율은 93.3%로 99.3% 이상으로 나타난 다른 실험구들에 비해 유의적으로 낮게 나타났다(P<0.05). 결론적으로 크기가 작은 넙치는 큰 넙치가 없는 곳에서 유의하게 빠른 성장과 높은 생존율을 나타내었다. 따라서 크기 선별은 넙치 치어(체중 1-5 g)의 성장과 생존율을 향상시키기 위해서 중요한 작업이 될 수 있다.

• 산업식품공학
• /
• 제13권4호
• /
• pp.269-274
• /
• 2009

습식분쇄의 최적조건을 얻고자 부형제 종류, 농도, 습식 분쇄시 rotor speed, bead size, feed rate, 분쇄회수를 달리하여 분쇄한 결과, 부형제로는 gum arabic을 사용하여 5%의 농도로 첨가할 때 가장 좋은 분쇄효과를 나타내었다. Rotor speed를 달리하여 습식분쇄한 결과, rotor speed가 증가할수록 좋은 결과를 나타내어 4,000 rpm에서 가장 우수한 것으로 나타났다. 원료와 직접 부딪혀 분쇄를 하게 되는 bead는 0.4 mm의 크기를 사용하였을 때 가장 작은 사이즈로 분쇄되는 것으로 나타났다. 분쇄가 이루어지는 chamber내에 원료를 공급하는 비율에 따른 결과에서는 40 L/h 의 속도로 공급했을 때 가장 작은 입도분포를 보였다. 분쇄회수에 따른 영향은 횟수에 따라서는 8회 이상으로 분쇄하였을때 0.6 $\mu$m이하의 입도분포가 90% 이상으로 나타나 10회를 분쇄하였을때 가장 좋은 효과를 나타내었다. 연속운전과 비연속운전의 비교에서는 연속운전이 더 효율적이었으며 부형제 종류에 따른 영향은 gum arabic을 첨가하여 분쇄하였을때 가장 우수한 결과를 나타내었다. 따라서 적절한 농도와 종류의 부형제 사용과 rotor speed, bead size, feed rate, 용매와의 혼합비의 최적공정을 수립한 습식 분쇄기술로 초미세액상칼슘의 제조가 가능하였고, 습식분쇄기술을 식품가공기술로 활용할 수 있는 가능성을 확보하였다.

• 환경위생공학
• /
• 제13권2호
• /
• pp.82-87
• /
• 1998

The opening temperature of emit heat, caloric value and decomposition hear were investigated by DSC & TGA in order to find the hazard of sanitary feed-stuff, also explosion hazard of dust was observed with electrical ignition after fodder dispersion by compressed air. Then opening temperature of emit heat of supporting gas. $O_{2}$ was much lower than inert gas. Ar. and caloric value increased 20. and the particle size of sanitary feed-stuff were appeared fire or explosion at 50/60 mesh and 60/80 mesh.

• 상하수도학회지
• /
• 제19권5호
• /
• pp.632-638
• /
• 2005

Membrane fouling index such as Silt Density Index (SDI) and Modified Fouling Index (MFI) is an important parameter in design of the integrated RO/NF membrane processes for drinking water treatment. In this study, the effect of particle, membrane and feed water characteristics on membrane fouling index were investigated systematically. Higher fouling index values were observed when filtering suspensions with smaller particle size and higher feed particle concentration. Larger membrane resistance due to smaller pore size resulted in an increased membrane fouling index. The variations of feed water hardness and TDS concentrations did not show any impact on fouling index, suggesting that there were no significant colloidal interactions among particles and thus the porosity of particle cake layer accumulated on the membrane surface could be assumed to be 0.36 according to random packing density. Based on the experimental observations, fundamental membrane fouling index model was developed using Happel Cell. The effect of primary model parameters including particle size ($a_p$), particle concentration ($C_o$), membrane resistance ($R_m$), were accurately assessed without any fitting parameters, and the prediction of membrane fouling index such as MFI exhibited very good agreement with the experimental results.

• 한국생산제조학회지
• /
• 제20권1호
• /
• pp.101-107
• /
• 2011

Analytical solution of micro-scale milling process is presented in order to suggest available machining conditions. The size effect should be considered to determine cutting characteristics in micro-scale cutting. The feed per tooth is the most dominant cutting parameter related to the size effect in micro-scale milling process. In order to determine the feed per tooth at which chips can be formed, the finite element method is used. The finite element method is employed by utilizing the Johnson-Cook (JC) model as a constitutive model of work material flow stress. Machining experiments are performed to validate the simulation results by using a micro-machining stage. The validation is conducted by observing cutting force signals from a cutting tool and the conditions of the machined surface of the workpiece.

• Journal of Biosystems Engineering
• /
• 제19권4호
• /
• pp.329-342
• /
• 1994

In order to reduce the production cost and improve the quality of dairy feed, several dairy feed mill models suitable for Korean farm size were developed. 6 TMR models were developed for the 1000, 600, 200 head of dairy cattle, and evaluated for capital investments and production costs to suggest the best model. Followings are summary of this study : 1. TMR terminal models were designed that dairy production capacity of TMR1000 models are 40 ton/day, TMR600 model is 20 ton/day and TMR200 models are 10 ton/day. Also, they can be extended their capacity up to twice. 2. Capital investment of TMR terminal models is 145 million won for TMR200-1,205 million won for TMR600 and 609 million won for TMR1000-3 model. 3. The bigger TMR terminal model has the more advantage in production cost. The best model for 1000 head of dairy cattle farm was TMR1000-3 with 10,849 won/ton of production cost, TMR600 for 600 head of dairy cattle farm with 13,829 won/ton, TMR200-1 for 200 head of dairy cattle farm with 16,943 won/ton of production cost, so feed production cost for the 200 head farm was 50% higher than 1,000 head size farm.

• 광물과산업
• /
• 제26권
• /
• pp.13-21
• /
• 2013

본 연구는 저품위 회중석을 최종 선별처리 하기에 앞서 비교적 조립자에서 많은 양의 맥석을 제거하여 경제적이며 효율적인 선별기술을 개발하는데 있다. 일반적으로 저품위 회중석의 경우 1차 조선정광을 얻기 위해 지그나 스파이랄 등의 비중선별기가 사용되지만, 본 연구에서는 KC3 Knelson Concentrator를 이용한 연구를 수행하였다. 시료는 파쇄와 분쇄과정을 거쳐 1mm 이하로 준비하였으며, 주요 실험변수로 처리횟수, 시료 급광량, Bowl의 회전속도(G Force), 급수량, 자성산물 사전제거, 시료입도 그리고 시료품위 변화 등이 1차 조선정광 회수에 미치는 영향을 관찰하였다. KC3 Knelson Concentrator를 이용한 비중선별 실험결과 처리횟수, 급광량, 시료입도 그리고 원 시료의 품위($WO_3%$) 등이 선별효율에 영향을 미치는 주요 실험변수임을 확인하였다. 실험결과 최적실험 조건에서 텅스텐의 품위와 회수율이 각각 $3.0%WO_3$와 90%인 1차 조선정광을 얻었다.

• 한국분무공학회지
• /
• 제6권4호
• /
• pp.14-21
• /
• 2001

Rotary atomizer is widely used in practical application ranging from combustion, cooling, spray drying, agriculture, chemical system. Rotary cup atomizer has some advantages such as extreme versatility and liquid atomization successfully varying widely in viscosity. In rotary atomization, the feed liquid is centrifugally accelerated to high velocity and the liquid extends over the rotating surface as a thin film before being discharged into an atmosphere. The degree of rotary atomization depends upon peripheral speed, feed rate, liquid properties and atomizer design. An important asset is that thickness and uniformity of the liquid sheet can readily be controlled by regulating the liquid flow rate and the rotational speed. LDPA(Laser Diffraction Particle Analyser) and image aquisition system are used to measure drop size distribution and spray pattern. The atomization characteristics of the rotary cup atomizer is investigated experimentally by varing the liquid feed rate, rotary cup speed and air velocity for atomization. As a results, the effect of air velocity on the atomization characteristics such as drop size and spray uniformity is considerably greater than variation of those with liquid feed rate.