• Journal of Plant Biotechnology
• /
• 제37권2호
• /
• pp.205-211
• /
• 2010

Yield productivity of staple crops must be increased at least 50% by 2050, in order to feed the world population which is expected to reach 90 billions. Photosynthetic carbon assimilation and carbohydrate metabolism leading to the production of starch would be the final frontier to quest for new sources of technology enabling such a drastic increase of crop productivity. In this review, attempts to genetically engineer plant photosynthetic carbon reduction cycle and metabolic pathways to increase starch production are introduced.

• Journal of Biosystems Engineering
• /
• 제42권3호
• /
• pp.155-162
• /
• 2017

Purpose: The objective of this study was to evaluate the biogas productivity of agricultural by-products (ABPs) based on their proximate composition. Specifically, the effects of proximate composition were investigated, and a new mixing method was developed using various ABPs that are difficult to digest for biogas production. Methods: Experiments were conducted to compare the biogas productivity between a single ABP and a mixture of ABPs that had the same proximate composition as the single ABP. To match the proximate compositions of radish waste and corn distiller's dried grains with solubles (DDGS), mixed ABPs were made from various ABPs. Biogas potential tests (BMP tests) were performed at an organic loading rate (OLR) of 2.5 g VS/L and a feed to microorganism ratio (F/M) of 0.5 under the mesophilic condition. Results: The individual ABPs (radish and corn DDGS) and the mixed ABPs (cabbage waste with skim milk waste, bean-curd waste with skim milk waste, and some others) produced similar amounts of biogas. Conclusions: The new mixing method based on proximate composition can be applied to other ABPs and organic wastes from factories and municipal waste treatment plants to develop renewable energy and effective waste treatment methods.

• 한국압력기기공학회 논문집
• /
• 제7권3호
• /
• pp.40-47
• /
• 2011

KSNPs(Korea Standard Nuclear Power Plant) have been applied the break exclusion criteria to the high energy lines passing through containment penetration area to ensure that piping failures would not cause the loss of containment isolation function, and to reduce the resulting dynamic effects. Systems with the criteria are the Main Steam system, Feed Water system, Steam Generator Blowdown system, and Chemical & Volume Control system. In accordance with FSAR(Final Safety Analysis Report), a 100% volumetric examination by augmented in-service inspection of all pipe welds appled the break exclusion criteria is required for the break exclusion application piping. However, it is difficult to fully satisfy the requirements of inspection because 12", 8" and 6" weldolet weldments of Main Steam pipe line have complex structural shapes. To resolve the difficulty on the application of conventional UT(Ultrasonic Testing) technique, realistic mock-ups and UT calibration blocks were made. Simulations of conventional UT were performed utilizing CIVA, a commercial NDE(Nondestructive Examination) simulation software. Phased array UT experiments were performed through mock-up including artificial notch type flaws. A phased array UT technique is finally developed to improve the reliability of ultrasonic test at main steam line pipe to 12", 8" and 6" branch connection weld.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2018년도 춘계학술발표회
• /
• pp.36-36
• /
• 2018

Soybean is the important crop in Asian countries as protein source, oil production and animal feed. Improving soybean using genetic transformation is the principal tool in nowadays. Developing herbicide resistant transgenic soybean plants through Agrobacterium-mediated transformation has been worked in many previous studied. However, the transformation efficiency is still low. Many attempts try to find the optimum media condition for plant regeneration after infection. After transformation, the plant regeneration is very important condition to promote growth of transgenic plant. In this study, we optimized a regeneration condition for two Korean soybean cultivar, Dawonkong and Pungsannamulkong using cotyledon, cotyledonary nodes and hypocotyl as explant. The results showed that shoot regeneration of cotyledonary nodes on B5 medium containing 2 mg/L 6-benzylaminopurine showed the highest percentage of regeneration in Dawonkong (75.8%) while Pungsannamulkong presented high number of shoots 2.12 shoots per explant. For transformation condition, co-cultivation in 7 days showed a high number of GUS positive expression. Most of explants can survived under media including 5 mg/L of glufocinate which refers phosphinotricin for 2-week selection. Washing with 400 mg/L of cefotaxime in several times and selection in plant regeneration media with 400 mg/L of cefotaxime can prevent bacteria growth, effectively.

• Nuclear Engineering and Technology
• /
• 제40권5호
• /
• pp.365-374
• /
• 2008

Dependability-critical systems, such as digital instrumentation and control systems in nuclear power plants, necessitate engineering techniques and tools to provide assurances of their safety and reliability. Determining system reliability at the architectural design phase is important since it may guide design decisions and provide crucial information for trade-off analysis and estimating system cost. Despite this, reliability and system engineering remain separate disciplines and engineering processes by which the dependability analysis results may not represent the designed system. In this article we provide an overview and application of our approach to build architecture-based, dynamic system models for dependability-critical systems and then automatically generate dynamic fault trees (DFT) for comprehensive, tool-supported reliability analysis. Specifically, we use the Architectural Analysis and Design Language (AADL) to model the structural, behavioral and failure aspects of the system in a composite architecture model. From the AADL model, we seek to derive the DFT(s) and use Galileo's automated reliability analyses to estimate system reliability. This approach alleviates the dependability engineering - systems engineering knowledge expertise gap, integrates the dependability and system engineering design and development processes and enables a more formal, automated and consistent DFT construction. We illustrate this work using an example based on a dynamic digital feed-water control system for a nuclear reactor.

• 한국미생물·생명공학회지
• /
• 제3권3호
• /
• pp.117-122
• /
• 1975

Activated sluge를 폐수처리와 사료로 이용하기 위하여 고구마와 소맥 전분폐수에서 채집한 32종의 균원을 선별한 결과 2종의 우수한 균원을 확인하고 N-9균원으로부터 7종의 세균J-3으로부터 6종의 세균을 분리하여 최종 선별 결과 3종의 세균 J-3-1, J-3-2, J-9-2를 선별하였다. 1. N-9의 혼합 배양의 경우 J-3보다는 floc형성능이 좋았으며 N-9로부터 Eugelena속의 원생동물 1종이 J-3에서는 Bodo 속의 원생동물 1종이 동정되었다. 2. 3종의 선별된 균에 대한 형태학적 생리학적 특성을 검사했다. 3. Sample N-9의 혼합균 배양에 의해 99％의 폐수의 B.O.D가 제거되었으며 세균 단독 배양일 경우 92％ 이상의 B.O.D.가 제거되었다. 4. 원료소맥 전분폐수의 B.O.D가 8,000 ppm이하에서도 B.B.D. 제거율과 sludge에서 생산된 protein 량은 폐수의 B.O.D. 와 처리하는 균에 따라 상이하였다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제38권2호
• /
• pp.31-37
• /
• 2019

Silkworm larval mortality specifically during spinning stage leading to non-spinning with specific morphological symptoms was frequently complained by sericulturists in Karnataka, India during 2015. Survey was conducted and information collected through questionnaire from the identified farmers who faced the problem of non-spinning in both traditional and non-traditional areas of Karnataka. Survey results indicate that the problem is specific to the silkworm crop of those farmers' who shifted from other crops of agriculture/ horticulture/olericulture/ floriculture to Sericulture. Silkworm rearing performance of the batches fed with these leaves confirmed that the pesticide sprayed to the crops previous to mulberry, remain in the soil and when mulberry plantation is taken up in these gardens, the pesticide is absorbed by the roots of mulberry plants and transported to the leaves. Silkworms that feed on these mulberry leaves, grow and ripen normally but during spinning stage, larvae die with external symptoms like regurgitation, body shrinkage, rectal protrusion later become hook shaped leading to non-spinning or partial metamorphosis into pupa and death or spin flimsy cocoons. Larval mortality ranged from a minimum of twenty five percent to a maximum of hundred percent. The problem was noticed from the first harvest of leaves and lasted for a maximum period of 36 months. Cocoon crop loss depends on the concentration, duration and type of pesticides used previously for other crops.

• 신재생에너지
• /
• 제17권4호
• /
• pp.9-27
• /
• 2021

Floating solar power markets are rapidly growing worldwide. The main policy instrument utilized to expand renewable energy use in foreign countries with many floating solar power installations is Feed-in-Tariffs (FITs). Foreign countries apply FIT to projects that have a secured grid connection, and lately, there has been a change in the direction of introducing or expanding auction systems. Vietnam and Taiwan give higher FIT to floating solar installations than land solar ones, and China, Vietnam, and Taiwan have higher FITs for certain regions. Compared to foreign countries where large-scale floating solar power installations have been installed, Korea has utilized Renewable Energy Certificate (REC) weights for residents' participation are provided additionally under the Renewable Portfolio Standard (RPS). In contrast to Korea, where residents' participation and benefit profit sharing are emphasized, the Netherlands provides opportunities for local residents to participate in floating solar power projects through cooperatives to improve the residents' acceptance.

• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.896-908
• /
• 2022

As a part of probabilistic risk (or safety) assessment (PRA or PSA) of nuclear power plants (NPPs), the primary role of human reliability analysis (HRA) is to provide credible estimations of the human error probabilities (HEPs) of safety-critical tasks. In this regard, it is vital to provide credible HEPs based on firm technical underpinnings including (but not limited to): (1) how to collect HRA data from available sources of information, and (2) how to inform HRA practitioners with the collected HRA data. Because of these necessities, the U.S. Nuclear Regulatory Commission and the Korea Atomic Energy Research Institute independently developed two dedicated HRA data collection systems, SACADA (Scenario Authoring, Characterization, And Debriefing Application) and HuREX (Human Reliability data EXtraction), respectively. These systems provide unique frameworks that can be used to secure HRA data from full-scope training simulators of NPPs (i.e., simulator data). In order to investigate the applicability of these two systems, two papers have been prepared with distinct purposes. The first paper, entitled "SACADA and HuREX: Part 1. The Use of SACADA and HuREX Systems to Collect Human Reliability Data", deals with technical issues pertaining to the collection of HRA data. This second paper explains how the two systems are able to inform HRA practitioners. To this end, the process of estimating HEPs is demonstrated based on feed-and-bleed operations using HRA data from the two systems.

• ALGAE
• /
• 제37권2호
• /
• pp.85-103
• /
• 2022

Korea is one of the most advanced countries in kelp aquaculture. The brown algae, Undaria pinnatifida and Saccharina japonica are major aquaculture species and have been principally utilized for human food and abalone feed in Korea. This review discusses the diversity, population structure and genomics of kelps. In addition, we have introduced new cultivar development efforts considering climate change, and potential carbon sequestration of kelp aquaculture in Korea. U. pinnatifida showed high diversity within the natural populations but reduced genetic diversity in cultivars. However, very few studies of S. japonica have been conducted in terms of population structure. Since studies on cultivar development began in early 2000s, five U. pinnatifida and one S. japonica varieties have been registered to the International Union for the Protection of New Varieties of Plants (UPOV). To meet the demands for seaweed biomass in various industries, more cultivars should be developed with specific traits to meet application demands. Additionally, cultivation technologies should be diversified, such as integrated multi-trophic aquaculture (IMTA) and offshore aquaculture, to achieve environmental and economic sustainability. These kelps are anticipated to be important sources of blue carbon in Korea.