• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.7
• /
• pp.980-987
• /
• 2012

In order to investigate the effect of physical forms of starter diets on performance, weaning age, nutrient digestibility and rumen biochemical factors, 24 female of neonatal Brown Swiss calves (average body weight of $39.5{\pm}1.2kg$) were randomly assigned to three treatments. Dietary treatments were mashed (MS), pelleted (PS), and texturized (TS) starter using 8 calves from birth till 90 days of age in each treatment. Diets were formulated to be iso-nitrogenous with 21% crude protein. Based on the experimental results, calves that received PS and TS diets, had significant higher average daily gain (ADG) than those receiving MS (p<0.01). Dry matter intake in calves fed PS and TS was greater than calves fed MS (p<0.05), but there was no significant difference in feed efficiency. Treatments had no effect on initiation of rumination. Weaning age of calves in MS was longer than the other two treatments (p<0.05). Crude protein and organic matter digestibility in MS treated calves were lower than other treatments (p<0.05). No differences were observed in neutral detergent fiber (NDF) and ash digestibility among treatments (p>0.05). Ruminal pH was higher (p<0.01) in MS than the other groups, but ruminal ammonia (g/dl) concentration was not different among the treatments. Body measurements such as body length, pin width, hip width, pin to hip length, size of metacarpus and metatarsus bones, hip height, wither height, stomach size and heart girth were not significantly different among the treatments. Overall, it is concluded that starter diets in the form of pellet and texture can improve performance in neonatal Brown Swiss calves compared to the mashed form.

• Ocean Science Journal
• /
• v.40 no.3
• /
• pp.177-182
• /
• 2005

The process of embryogenesis and larval development of the asteroid sea star Asterias amurensis $(U{\ddot{u}}tken)$ was observed, with special attention paid to morphological change and larval duration. In reproductive season, mature sea stars were collected under floating net cages, located in Tongyeong, southern Korea. The mature eggs are $138\;{\mu}m$ in average diameter, semi-translucent and orange in color, sperms in good condition appear light cream to white-gray in color. Embryos develop through the holoblastic equal cleavage stage and a wrinkled blastula stage that lasts about 9 hours after fertilization. Gastrulae bearing an expanded archenteron hatch from the fertilization envelope 22 hours after fertilization. At the end of gastrulation, rudiments of the left and right coelom are formed. By day 2, larvae possess complete alimentary canal and begin to feed. At this stage, the larva is called early bipinnaria. In 6-day-old larvae, the pre- and post- oral ciliated bands form complete circuits and the bipinnarial processes start to develop. By day 12, the lateral and anterior projection of the larval wall processes along the ciliated bands begins to thicken and curl, and the ciliated bands become more prominent. By day 32, early brachiolaria are presented with three pairs of brachiolar arms. Advanced brachiolaria with a well-developed brachiolar complex (three pairs of brachia and central adhesive disc) occur 6 weeks after fertilization. In the field, spawning of the sea star was observed in April to May, settlement form larvae and just settlements seem to occur from June to July, and early juveniles occur from August to September. Although we had not described the end of brachiolaria stage, it can be tentatively estimated that the duration of the pelagic stage of A. amurensis is 40 to 50 days.

• Journal of KIBIM
• /
• v.5 no.4
• /
• pp.53-62
• /
• 2015

Korea has been at the forefront of green growth initiatives. In 2008, the government declared the new vision toward 'low-carbon society and green growth'. The government subsidies and Feed-in Tariff (FIT) increased domestic usage of solar power by supplying photovoltaic housing and photovoltaic generation systems. Since 2000, solar power industry has been the world's fastest growing source with the annual growth rate of 52.5%. Especially, BIPV(Building Integrated Photovoltaic) systems are capturing a growing portion of the renewable energy market due to several reasons. BIPV consists of photovoltaic cells and modules integrated into the building envelope such as a roof or facades. By avoiding the cost of conventional materials, the incremental cost of photovoltaics is reduced and its life-cycle cost is improved. When it comes to atypical building, numerous problems occur because PV modules are flat, stationary, and have its orientation determined by building surface. However, previous studies mainly focused on improving installations of solar PV technologies on ground and rooftop photovoltaic array and developing prediction model to estimate the amount of produced electricity. Consequently, this paper discusses the problem during a planning and design stage of BIPV systems and suggests the method to select optimal design of the systems by applying the national strategy and economic policies. Furthermore, the paper aims to develop BIM tool based on the engineering knowledge from experts in order for non-specialists to design photovoltaic generation systems easily.

• Convergence Security Journal
• /
• v.22 no.1
• /
• pp.135-140
• /
• 2022

This study aims to analyze exercise cases and issues using smart devices and technologies, and to present the development direction of a smart exercise environment suitable for the wellness life of active seniors with high activity and economic power unlike the existing silver generation. In the fitness industry, the subscription economy that regularly receives or uses necessary exercise tools, services, and digital content is expanding, and business models based on hardware sales and content subscription continue to emerge. In order to have value competitiveness as a platform that provides active seniors with integrated exercise services for health care, not only fitness centers, but also home training exercise equipment, fitness-related applications, and smart wearable device markets should be organically connected to form an expanded total platform. In order to have value competitiveness as a platform that provides active seniors with integrated exercise services for health care, not only fitness centers, but also home training exercise equipment, fitness-related applications, and smart wearable device markets should be organically connected to form an expanded total platform. The linkage of the digital healthcare function, which provides real-time changes to exercise programs based on continuous monitoring and feed back through wearable devices before, after, and during exercise by receiving and selecting exercise programs suitable for individual health status, is the differentiating factor in the smart fitness model.

• Animal Bioscience
• /
• v.37 no.7
• /
• pp.1255-1262
• /
• 2024

Objective: The present study evaluated the effect of flaxseed meal degraded by a protease, Lactobacillus plantarum, or both on the growth performance, nutrient digestibility, and health status of broilers. Methods: There were four diets containing flaxseed meals in its non-degraded form (control, CON), degraded with 3,000 U/kg of protease (enzymatic, ELM), 1.0×10⁹ CFU/kg of Lactobacillus plantarum (fermented, FLM), or both (dual-degraded, DLM). Each form of flaxseed meals was added at 15% of diet. A total of 480 yellow-feathered broilers at 22 d of age were distributed into 4 groups with 6 replicates of 20 chickens each. The feeding trial lasted for 42 d. Growth performance, apparent fecal digestibility (dry matter, energy, crude protein, and ash), and serum immunoglobins and antioxidases were determined at 42 and 63 d of age. Results: Results showed that ELM, FLM, and DLM increased (p<0.001) the contents of peptides and decreased (p<0.001) cyanogenic glycosides, compared to CON. The diets with degraded flaxseed meals increased (p<0.05) feed intake and body weight gain throughout the feeding trial, and the digestibility of energy, crude protein, and ash at the end of feeding trial. Furthermore, all degraded groups enhanced (p<0.05) broiler health status by increasing serum immunoglobulins A and G. Additinally, DLM showed more pronounced effects (p<0.05) on these parameters than ELM or FLM. Conclusion: Flaxseed meals degraded by enzymolysis, fermentation, or both had improved nutrition and application in broilers.

• Journal of Animal Science and Technology
• /
• v.47 no.6
• /
• pp.975-984
• /
• 2005

This study fulfilled to investigate the feed efficiency, tissue selenium distribution, carcass characteristic and economic value in finishing Hanwoo steers fed organic selenium mix (OSM) which included seleno-yeast, rumen culture and other microbial supplements. Forty five finishing Hanwoo steers were tested for 4 months dividing to three feeding groups: OSM add as 0.5 ppm Se of DM feeds (0.5 ppm OSM), OSM enriched add as 1.0 ppm Se of DM feeds (1.0 ppm OSM) and basal diet without OSM (control). The total weight gains, the average daily gains and the feed intakes were not differ in treatments (p > 0.05). No differences (p > 0.05) were noted for hot carcass weight, loin eye area, backfat thickness, meat yield index, meat color, fat color, tenderness and maturity. However, the 1.0 ppm OSM showed better performances for feed requirement, TDN per gain, meat yield grade and meat quality grade compared to other groups. Tissue selenium distribution was increased by organic selenium feeding: higher Se concentration in liver and rump of 0.5 ppm OSM (p < 0.05), and kidney, liver, sirloin and rump of 1.0 ppm OSM (p < 0.05) than the tissues of control group. Generally, tissue selenium was the highest value in 1.0 ppm OSM and showed higher concentrate in order; kidney, liver, sirloin and rump. The income over feed cost was 1.06-fold higher in 1.0 ppm OSM than control group. In conclusion, organic selenium mix supplementation and its amounts were not influenced to feed intake, body gain and carcass characteristic but significantly increased tissue selenium. Therefore, these results suggest that finishing Hanwoo steer fed an enriched organic selenium mix with proper probiotics is able to produce “high-Se” beef as high bioavailable form as well as create a beneficial opportunity on Hanwoo farm.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.364-367
• /
• 2007

Typical seamless tube production methods are an extrusion and a rotary tube piercing. The rotary piercing process is more competitive than the extrusion process form view point of productivity, quality, and flexibility. It consists of twin rolling mills, a pair of disc or flat guides, and a plug. Twin rolling mills are skewed with proper angles in two directions. A round billet is progressively fed forward and rotated due to the rotation of twin rolling mills. Internal crack initiation and growth at central area of the billet are gradually progress because of the repeating actions of tension and rotation. Design variables in the rotary piercing rolling process are the feed angle, the cross angle, the reduction ratio, and the position of plug. In this work, a rotary tube piercing machine was developed and parametric studies on design variables were carried out using finite element analysis. The Brozzo ductile fracture criterion was utilized to determine an internal crack initiation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.3
• /
• pp.389-394
• /
• 1993

A study on housing and management of dairy cows was conducted in three villages. All activities of husbandry related to the housing and the condition of the cows were observed and farmers were interviewed using a questionnaire. The main type of housing was a tie stall mostly in the back yard area with a gable or shed type roof. Inside the shed the temperature ranged from 17 to $29^{\circ}C$ and the relative humidity ranged from 62 to 73%. Drainage and manure handling was poor which lead to poor cleanliness of the stables and animal skins. The floor space was mostly wide and the roof level was low (less than 2.5 m). The slope of the floor (1-3%) was sufficient, the roughness of the floor was of medium quality. The shape and size of the feed trough was good with a surface of mostly irregular forms. Concentrate was mixed with water and offered in liquid form in pails made from plastic or from parts of rubber car tires. Hoof length was too long which could lead to unstable position and self injury. It is concluded that the housing conditions of dairy cattle need to be improved in order to improve the condition of the animals and the production performance.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.5
• /
• pp.620-633
• /
• 1998

Methods developed for measuring digestibility and availability of amino acids in feedstuffs used in pig nutrition are reviewed. Digestibility is a proportion of an amino acid in a feed that is absorbed from the digestive tract and should be determined from the difference between the amount of amino acid consumed and passing the distal ileum. Techniques for ileal digesta sampling including various types of cannulas: a re-entrant, T-piece, IPV, IPVC and ileaorectal anastomosis are described and comparisons amongst these methods are presented. Other methodologies like mobile bag technique, in vitro assays and mathematical prediction method are also described. Significance and methodologies for measurement of endogenous nitrogen and amino acids losses at the distal ileum and their effect on the apparent and true nitrogen and amino acid digestibilities in feeds are discussed. Factors influencing the apparent and true amino acid digestibilities such as dry matter intake, protein, fibre and antinutritive compounds content in the diet are discussed. Amino acid bioavailability -the proportion of the total amino acid digested and absorbed in a form utilized in metabolism - measured by the growth assay may differ from its ileal digestibility. Chemical methods for determination of available lysine content in heat treated feeds are evaluated.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.6
• /
• pp.39-51
• /
• 1996

In the turning maneuver of the vehicle, its motion is mainly dependent on the genuine steering characteristics in view of the directional stability for stable turning ability. The under steer vehicle has an ability to maintain its own directonal performance for unknown external disturbances to some extent. From a few years ago, in order to acquire the more enhanced handling performance, some types of four wheel steering vehicle were considered and constructed. And, various rear wheel control logics for external disturbances has not been suggested. For this reason, in this posed rear wheel control logic is based on the yaw rate feed back type and is slightly modified by an yaw rate tuning factor for more stable turning performance. And an external disturbance is defined as a motivation of the additional yaw rate in the center of gravity by an uncertain input. In this study, an external disturbance is applied to the vehicle as a form of the additional yawing moment. Finally, the proposed rear wheel control logic is tested on the multi-body analysis software(ADAMS). J-turn and double lane change test are performed for the validation of the control logic.