• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.2
• /
• pp.110-119
• /
• 2023

The prediction of ship resistance performance is typically obtained by Computational Fluid Dynamics (CFD) simulations or model tests in towing tank. However, these methods are both costly and time-consuming, so hull-form designers use statistical methods for a quick feed-back during the early design stage. It is well known that results from statistical methods are often less accurate compared to those from CFD simulations or model tests. To overcome this problem, this study suggests a new approach using a Convolution Neural Network (CNN) with voxelized hull-form data. By converting the original Computer Aided Design (CAD) data into three dimensional voxels, the CNN is able to abstract the hull-form data, focusing only on important features. For the verification, suggested method in this study was compared to a parametric method that uses hull parameters such as length overall and block coefficient as inputs. The results showed that the use of voxelized data significantly improves resistance performance prediction accuracy, compared to the parametric approach.

• Korean Journal of Veterinary Research
• /
• v.32 no.4
• /
• pp.649-661
• /
• 1992

This study was performed to compare DNA content by flow cytometer (FCM) and glutathione S-transferase placental form (GST-P) positive foci for searching objective and accurated properties of tumor. Sprague-Dawley rats aged six weeks were divided into three groups and group 1 and 2 of rats were given an intraperitoneal injection of diethylnitrosamine at 200mg/kg body weight and group 3 of rats were given saline. Three weeks after beginning of the experiment, all groups were performed partial hepatectomy. Group 1 of rats were begun to feed on diets containing 0.02% 2-acetylaminofluorene as a promoter for six weeks, group 2 and 3 of rats were begun to feed on basal diets. At 4, 6, and 8 weeks after initiation, all groups of rats were killed, livers were extracted for H & E stain, immunohistochemical stain, and DNA ploidy analysis. In quantitative analysis for GST-P positive lesion number and area by using Image Analyzer, group 1 and 2 represented significant difference in comparison with group 3. In ploidy distribution, diploid cells of group 1 and 2 were increased significantly in comparison with those of group 3 at 4, 6, and 8 weeks after initiation, respectively tetraploid cells were reduced. But S-phase cells were not changed significantly. It is concluded that ploidy change by FCM is useful as objective data for early detection in hepatocarcinogenesis. Therefore, methodology and study of DNA content are carried out for more objective and accurate ploidy analysis in liver tumor.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.2
• /
• pp.38-43
• /
• 2007

This paper describes ultrasonically assisted grinding used to obtain a glossy surface quickly and precisely. High-quality surfaces are required for plastic injection molding dies used in the production of plastic parts such as dials for cellular phones. Traditionally, in order to finish the dies, manual polishing by a skilled worker has been required after the machining processes, such as electro discharge machining (EDM), which leaves an affected layer, and milling, which leaves tooling marks. However, manual polishing causes detrimental geometrical deviations of the die and consumes several days to finish a die surface. Therefore, a machining process for finishing dies without manual polishing to improve the surface roughness and form accuracy would be extremely valuable. In this study, a 3D positioning machine equipped with an ultrasonic spindle was used to conduct grinding experiments. An electroplated diamond tool was used for these experiments. Generally, diamond tools cannot grind steel because of excessive wear as a result of carbon atoms diffusing into bulk steel and chips. However, ultrasonically assisted grinding can achieve a fine surface (roughness Rz of $0.4{\mu}m$) on die steel without severe tool wear. The final aim of this study is to realize mirror surface grinding for injection molding dies without manual polishing. To do this, it is necessary to fabricate an electroplated diamond tool with high form accuracy and low run-out. This paper describes a tool-making method for high precision grinding and the grinding performance of a self-electroplated tool. The ground surface textures, tool performance and tool life were investigated A ground surface roughness Rz of 0.14 um was achieved Our results show that the spindle speed, feed rate and cross feed affected the surface texture. One tool could finish $5000mm^2$ of die steel surface without any deterioration of the ground surface roughness.

• Animal Bioscience
• /
• v.35 no.2
• /
• pp.247-259
• /
• 2022

Objective: This study was conducted to investigate the effects of age and diet forms on growth-development patterns, serum metabolism indicators, and parameters of body fat deposition in Cherry Valley ducks. Methods: According to the hatching age and initial weight, a total of 150 1-day-old male SM3 Cherry Valley ducks were randomly assigned to two diet forms (pellet vs powder form). Each treatment had with 5 replicates per treatment and 15 meat ducks per replicate. The study lasted 42 d, which was divided into two periods (1 to 21 vs 22 to 42 d). Results: Our results showed that compared with powder group, ducks in pellet group had greater growth performance during different period (p<0.05). The inflection point was 24 d and was not numerically affected by diet forms. Increasing age (42 vs 21 d) significantly increased the weight of body fat and hepatic fat metabolism related enzyme activities in ducks (p<0.05), meanwhile, increasing age (42 vs 21 d) improved serum metabolism indicators and decreased mRNA expression levels of fat metabolism-related genes in liver (p<0.05). Ducks fed different diets (pellet vs powder form) increased growth performance as well as the weight of body fat and improved serum metabolism indicators (p<0.05). In addition, interactions were found between age and diet forms on the levels of serum metabolism indicators in ducks (p<0.05). Conclusion: In conclusion, powder feed reduced growth performance of ducks, and the day of inflection point was 24 days old. Ducks with higher age or fed with pellet diet showed higher fat deposition. The effect of age and feed forms on body fat deposition might result from changes in the contents of serum metabolism indicators, key enzyme activity of lipid production, and hepatic gene expressions.

• Journal of Aquaculture
• /
• v.9 no.4
• /
• pp.377-384
• /
• 1996

A 15-week of growth trial was conducted to evaluate practical diets for growing Korean rockfish (Sebastes schlegeli). Two replicate groups of the fish average weighing 125 g were fed one of four experimental diets containing $41\~45\%$ protein and $6\~8\%$ lipid. A control diet with $58\%$ fish meal as protein source was included and practical form diets with $40\%$ fish meal and various practical ingredients such as meat meal, blood meal, soybean meal, and corn gluten meal were included. These experimental dry pellet diets were compared with commercial diets containing $51\~53\%$ protein and $5\~13\%$ lipid for marine fish or raw fish-based moist pellet (RMP) diet containing $58\%$ protein and $9\%$ lipid consisted of $50\%$ frozen horse mackerel and $50\%$ commercial binder meal. Weight gain, feed efficiency, daily feed intake and protein efficiency ratio in the fish fed the experimental diets and commercial diets were not significantly different to those in the fish fed the control diet. However weight gain, feed efficiency and protein efficiency ratio in the fish fed the RMP diet were significantly higher than those in the fish fed the experimental diets and commercial diets. These differences of growth performance between experimental diets and RMP diet may be reason for different dietary protein and energy levels. The experimental diet can save up to $20\%$ cost of fish production compare with control diet, whereas RMP diet is more expensive than other diets in the fish production.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.4
• /
• pp.517-524
• /
• 2011

The effect on sow milk of variable levels of cassava in lactating sow diets was analyzed in an attempt to explain the beneficial effects reported by producers of including cassava as a basal feed. Twenty crossbred lactating sows were randomly assigned to five dietary treatments. The treatments were: i) broken rice (BR) as the basal feed (BR100), ii) 50% of BR replaced with cassava chip meal (CCM) (CM50), iii) 75% of BR replaced with CCM (CM75), iv) CCM as the basal feed (CM100), and v) dried boiled cassava chips (CCB) as the basal feed (CB100). The hydrocyanide (HCN) content of CCB was reduced to be intermediate between HCN in the no cassava (BR100) and the 50% cassava (CB50) diets. Hydrocyanide was 0.54, 3.24, 4.41, 5.43 and 1.77 ppm in the BR100, CM50, CM75, CM100 and CB100 diets, respectively. Increasing cassava did not affect feed intake (p>0.05), but increased HCN intake (p<0.01). Milk composition was analyzed for protein, fat, lactose, solids not fat (SNF) and total solids (TS). Milk quality was analyzed for total microbes, coliform bacteria, thiocyanate ($SCN^-$), lactoperoxidase (LPO), and glutathione peroxidase (GPx) activity. At farrowing, sow milk composition was not affected by experimental diets (p>0.05), but milk $SCN^-$ increased as the intake of HCN increased in sows diets (p<0.01), $r^2$ = 0.96. At mid-lactation (day 14), milk composition was not affected (p>0.05). The milk quality levels of $SCN^-$ were 9.4, 10.3, 10.5, 11.6 and 9.1 ppm for the BR100, CM50, CM75, CM100 and CB100 diets, respectively (p = 0.01). The LPO contents were 16.41, 42.13, 51.42, 53.94 and 22.81 unit/L, respectively (p = 0.03). There was no GPx activity found in sow milk. When BR was replaced with cassava meal, total microbes and coliforms were reduced 78% and 87%, respectively, by the influences of HCN. The reported beneficial effects of cassava chip meal as a basal feed in lactating sow diets is manifested by improved performance of suckling pigs. This is due to beneficial, non-toxic levels of HCN in the diets. Besides passing HCN to suckling pigs in the form of $SCN^-$, sow milk may also benefit suckling pigs with the observed (day 14) increase in lactoperoxidase content and reduction in coliform bacteria.

• Animal Bioscience
• /
• v.34 no.3_spc
• /
• pp.434-442
• /
• 2021

Objective: This study aims to evaluate the influence of dietary flavonoids on the growth performance, blood and intestinal profiles, and carcass characteristics of broilers by employing a meta-analysis method. Methods: A database was built from published studies which have reported on the addition of various levels of flavonoids from herbs into broiler diets and then monitored growth performance, blood constituents, carcass proportion and small intestinal morphology. A total of 42 articles were integrated into the database. Several forms of flavonoids in herbs were applied in the form of unextracted and crude extracts. The database compiled was statistically analyzed using mixed model methodology. Different studies were considered as random effects, and the doses of flavonoids were treated as fixed effects. The model statistics used were the p-values and the Akaike information criterion. The significance of an effect was stated when its p-value was <0.05. Results: Dietary flavonoids increased (quadratic pattern; p<0.05) the average daily gain of broilers in the finisher phase. There was a reduction (p<0.01) in the feed conversion ratio of the broilers both in the starter (linear pattern) and finisher phases (quadratic pattern). The mortality rate tended to decrease linearly (p<0.1) with the addition of flavonoids, while the carcass parameter was generally not influenced. A reduction (p<0.001) in cholesterol and malondialdehyde concentrations (both linearly) was observed, while super oxide dismutase activity increased linearly (p<0.001). Increasing the dose of flavonoids increased (p<0.01) the villus height (VH) and villus height and crypt depth (VH:CD) ratio (p<0.05) in the duodenum. Similarly, the VH:CD ratio was elevated (p<0.001) in the jejunum following flavonoid supplementation. Conclusion: Increasing levels of flavonoids in broilers diet leads to an improvement in growth performance, blood constituents, carcass composition and small intestinal morphology.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.1
• /
• pp.82-89
• /
• 2009

Two in vitro experiments were conducted to examine the effects of propionate precursors in the dicarboxylic acid pathway on ruminal fermentatation characteristics, $CH_4$ production and degradation of feed by rumen microbes. Fumarate or malate as sodium salts (Exp. 1) or acid type (Exp. 2) were added to the culture solution (150 ml, 50% strained rumen fluid and 50% artificial saliva) to achieve final concentrations of 0, 8, 16 and 24 mM, and incubated anaerobically for 0, 1, 3, 6, 9 and 12 h at $39^{\circ}C$. For both experiments, two grams of feed consisting of 70% concentrate and 30% ground alfalfa (DM basis) were prepared in a nylon bag, and were placed in a bottle containing the culture solution. Addition of fumarate or malate in both sodium salt and acid form increased (p<0.0001) pH of culture solution at 3, 6, 9 and 12 h incubations. The pH (p<0.0001) and total volatile fatty acids (VFA, p<0.05) were enhanced by these precursors as sodium salt at 3, 6 and 9 h incubations, and pH (p<0.001) and total VFA (p<0.01) from fumarate or malate in acid form were enhanced at a late stage of fermentation (9 h and 12 h) as the addition level increased. pH was higher (p<0.001) for fumarate than for malate as sodium salt at 3 h and 6 h incubations. Propionate ($C_3$) proportion was increased (p<0.0001) but those of $C_2$ (p<0.05) and $C_4$ (p<0.01 - p<0.001) were reduced by the addition of sodium salt precursors from 3 h to 12 incubation times while both precursors in acid form enhanced (p<0.011 - p<0.0001) proportion of $C_3$ from 6h but reduced (p<0.018 - p<0.0005) $C_4$ proportion at incubation times of 1, 3, 9 and 12 h. Proportion of $C_3$ was increased (p<0.05 - p<0.0001) at all incubation times by both precursors as sodium salt while that of $C_3$ was increased (p<0.001) from 6h but $C_4$ proportion was decreased by both precursors in acid form as the addition level increased. Proportion of $C_3$ was higher (p<0.01 - p<0.001) for fumarate than malate as sodium salt from 6 h incubation but was higher for malate than fumarate in acid form at 9 h (p<0.05) and 12 h (p<0.01) incubation times. Increased levels (16 and 24 mM) of fumarate or malate as sodium salt (p<0.017) and both precursors in acid form (p<0.028) increased the total gas production, but no differences were found between precursors in both chemical types. Propionate precursors in both chemical types clearly reduced (p<0.0001 - p<0.0002) $CH_4$ production, and the reduction (p<0.001 - p<0.0001) was dose dependent as the addition level of precursors increased. The $CH_4$ generated was smaller (p<0.01 - p<0.0001) for fumarate than for malate in both chemical types. Addition of fumarate or malate as sodium type reduced (p<0.004) dry matter degradation while both precursors in both chemical types slightly increased neutral detergent fiber degradability of feed in the nylon bag.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.3
• /
• pp.349-354
• /
• 1996

An Experiment was conducted to evaluate the effects of dietary excessive chromium picolinate on growth performance, nutrient utilizability and the content of serum cholesterol, HDL cholesterol, glucose, triglyceride and non-esterified fatty acid in broiler chicks. Experimental diets based on corn-soybean meal were supplemented at 0, 800, 1,600 and 2,400 ppb chromium in the form of chromium picolinate. Each treatment had six replicates of six female chicks each (average initial weight=45.6 g). Experimental period lasted for six weeks. Excessive supplementation of chromium as chromium picolinate had no effect on body weight gain, feed intake, feed conversion and nutrient utilizability of broiler chicks. Mortality was improved with a supplementation of chromium (p < 0.05). However, serum glucose decreased as chromium level increased (p < 0.05). Up to 2,400 ppb chromium as chromium picolinate, signs of toxicity were not noticed in this study.

• Journal of Welding and Joining
• /
• v.15 no.4
• /
• pp.109-115
• /
• 1997

Laser cladding is a technique for modification of metal surface. In this laser cladding experiment a metal powder feeding system was developed for more efficient laser cladding. This system can reduce processing time and be used simpler than the conventional method. The feeding of metal powder has given a rise to the process for sequential buildup of bulk rapidly solidified materials in the form of fine powder stream to the laser cladding process. The parameters of laser cladding have been investigated using this experimental equipment. Bronze on aluminum alloy and copper on aluminum alloy were experimented by using defocused beam, powder feeding system, and gas shielding. Good cladding was achieved in the range of beam travel speed of 2.25m/min. In the case of copper/aluminum and bronze/aluminum substrate, the absorption of laser beam was too high to produce low diluted clad. In the case of copper/1050 aluminum, the optimal laser cladding condition was of laser power of 2.8kW, powder feed rate of 0.31g/s and beam travel speed of 2.25m/min. In the case of bronze/aluminum the optimal condition is of laser power of 2.5kW, powder feed rate of 0.31g/s, and beam travel speed of 2.36m/min.