• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.598-625
• /
• 2014

To support the procedure for determining an optimal liquefaction cycle for FLNG FEED, an ontological modeling method which can automatically generate various alternative liquefaction cycles were carried out in this paper. General rules in combining equipment are extracted from existing onshore liquefaction cycles like C3MR and DMR cycle. A generic relational model which represents whole relations of the plant elements has all these rules, and it is expressed by using the system entity structure (SES), an ontological framework that hierarchically represents the elements of a system and their relationships. By using a process called pruning which reduces the SES to a candidate, various alternative relational models of the liquefaction cycles can be automatically generated. These alternatives were provided by XML-based formats, and they can be used for choosing an optimal liquefaction cycle on the basis of the assessments such as process simulation and reliability analysis.

• Animal Bioscience
• /
• 제36권2호
• /
• pp.167-174
• /
• 2023

Phosphorus (P) is a macro mineral needed for bone mineralization and cell membrane structure and P is also involved in several fundamental pathways of metabolism in the body. Because of the low concentration and digestibility of P in plant ingredients that are the main components of diets for poultry and pigs, feed phosphates are usually included in diets in addition to the P contributed by plant ingredients. The most widely used feed phosphates in poultry and swine diets are dicalcium phosphate (DCP) and monocalcium phosphate (MCP), but tricalcium phosphate (TCP), monosodium phosphate (MSP), and magnesium phosphate (MgP) may be used as well. Because feed phosphates are mostly produced from rock phosphate, feed phosphates have impurities that contain minerals other than P. Concentrations of P in feed phosphates range from 14.8% (MgP) to 25.7% (MSP). The standardized total tract digestibility (STTD) of P in pigs ranges from 71% (TCP) to 95% (MSP). The STTD of Ca and the standardized ileal digestibility (SID) of P and Ca in feed phosphates fed to pigs and poultry have been determined only in a few experiments. Available data indicate that the STTD of Ca and SID of P in MCP are greater than in DCP in both poultry and pigs, but the SID of Ca is similar between DCP and MCP fed to broilers. Information on mineral concentrations and digestibility values in feed phosphates is needed in diet formulation for pigs and poultry, but if diets are formulated to contain equal concentrations of digestible P and Ca, it is unlikely that animal performance will be impacted by the source of feed phosphates used in the diet.

• 수산해양기술연구
• /
• 제50권2호
• /
• pp.202-213
• /
• 2014

The sea cucumber, Apostichopus japonicus, is becoming an important aquaculture species in China, Japan and Korea. The purpose of this study is to evaluate the biological performance of a tubular type of subsurface cage for sea cucumber grow-out by in-situ tests. The cage structure was constructed of PP (polypropylene) frames and PP tubes (${\phi}130mm{\times}24pieces$). A set of tests were conducted at a depth of 15 m near Seosaeng, Ulsan, Korea for 295 days (23 July, 2012 to 13 May, 2013). A total of 155 sea cucumbers were used and fed a mixed diet containing mud, mineral, wheat, fish meal, etc (3% of their body weight). At the end of the experiments, sea cucumber showed a higher survival rate in feed shelter (77.14%) rather than no feed shelter (64.71%). The specific growth rate (SGR) of sea cucumbers in feed condition (0.04% $day^{-1}$) was higher than that of no feed culture animals (-0.49% $day^{-1}$) during total experimental periods. The result was able to find a no significance difference in survival rate but a significance difference in SGR under feed and no feed treatments.

• Journal of Microbiology and Biotechnology
• /
• 제32권3호
• /
• pp.269-277
• /
• 2022

Human activities account for approximately two-thirds of global methane emissions, wherein the livestock sector is the single massive methane emitter. Methane is a potent greenhouse gas of over 21 times the warming effect of carbon dioxide. In the rumen, methanogens produce methane as a by-product of anaerobic fermentation. Methane released from ruminants is considered as a loss of feed energy that could otherwise be used for productivity. Economic progress and growing population will inflate meat and milk product demands, causing elevated methane emissions from this sector. In this review, diverse approaches from feed manipulation to the supplementation of organic and inorganic feed additives and direct-fed microbial in mitigating enteric methane emissions from ruminant livestock are summarized. These approaches directly or indirectly alter the rumen microbial structure thereby reducing rumen methanogenesis. Though many inorganic feed additives have remarkably reduced methane emissions from ruminants, their usage as feed additives remains unappealing because of health and safety concerns. Hence, feed additives sourced from biological materials such as direct-fed microbials have emerged as a promising technique in mitigating enteric methane emissions.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권1호
• /
• pp.54-60
• /
• 2001

A study was conducted to assess the nutritive value of two diets based on a low-energy variety of wheat, RAC C1 and their effects on intestinal mucosal structure and function in broiler chickens. The diets were fed with or without microbial enzyme supplement to male and female broiler chickens. The digesta viscosity was reduced (p<0.001) through supplementation with a microbial enzyme in male and female chicks. Enzyme supplementation also improved the dietary apparent metabolizable energy content (p<0.001) and had slight but non-significant positive effects on chick growth and feed conversion ratio. Intestinal mucosal structure and enzyme function were not affected by microbial enzyme supplement. Male chicks consumed more feeds (p<0.001), attained higher final body weight (p<0.001) and were more efficient at feed utilization (p<0.01) than the female chicks. Except for duodenal villus surface area and ileal protein content, intestinal mucosal structure and enzyme activities were similar between the two sexes and dietary treatment groups. The study showed an improvement in the nutritive value of the diets in the presence of the microbial enzyme supplement.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.63-67
• /
• 2004

The problem is improving the positioning precision of a permanent magnet linear synchronous motor (PMLSM). Thus, this paper presents the design and realization of an adaptive dither to reduce the force ripple in PMLSM. A composite control structure is used, consisting of three components: a simple feed-forward component, a PID feedback component and an adaptive feed-forward compensator (AFC). Especially adaptive feed-forward component cancel out detent force using wavelet transformation. Computer simulation results verify the effectiveness of the proposed scheme for high precision motion trajectory tracking using the PMLSM

• 대한기계학회논문집
• /
• 제7권1호
• /
• pp.36-45
• /
• 1983

In order to characterize the machine tool feed-drive dynamics, thread cutting experiments are performed with cutting conditions and slide-way lubrication varied. During the experiments, the carriage, tool post and tail stock accelerations in the feed direction are measured, and analyzed by employing the spectral analysis method. It is found that the tool post vibration in the feed direction during thread cutting operation is mainly due to those of the carriage and the workpiece. Other structure-related vibrations show little effects on the tool post vibration. The characteristics of the carriage vibration is shown to be fairly consistent, except the vibration amplitude, regardless the variations in cutting condition and lubrication within the experimental range. The experimental results suggest that the feeddrive system can be modelled as a 2 DOF damped oscillatory system.

• Journal of electromagnetic engineering and science
• /
• 제2권1호
• /
• pp.11-15
• /
• 2002

In this paper, we have proposed the new configuration of wideband antenna using CPW fred lines. The proposed antenna has CPW feed lines and U-slot to achieve wade bandwidth with good impedance matching. The use of CPW feed line can decrease the number of substrates. It is compared with the conventional antenna find by a microstrip fled line. The parameters of CPW fred lines were studied by using the quasi-static approximation which is based on the conformal mapping method. The analysis of CPW discontinuities such as the tapered-step structure and the open ended gap were studied by using the quasi-static approximation which is based on the boundary element method. Also, the equivalent circuit model of multi-layer antenna were proposed using the cavity model. Experiment results of the proposed antenna 7how wide-bandwidth characteristics and good radiation patterns in passband.

• 한국기계가공학회지
• /
• 제19권1호
• /
• pp.49-55
• /
• 2020

Studies on the optimizations of machining processes use two different methods. The first is feed control in real-time by spindle load in a machine tool. The second is feed scheduling in NC code control by material removal rate using a CAD/CAM system. Each approach possesses its respective merits and issues compared to the other. That is, each method can be complementary to the other. The purpose of the study is to improve the productivity of the bulkhead, an aircraft Duralumin structure. In this paper, acceleration or deceleration of cutting tool by spindle load data is achieved using adaptive feed control macro programming in a machine tool.

• 한국전기전자재료학회논문지
• /
• 제16권12S호
• /
• pp.1237-1241
• /
• 2003

In this paper, we report a novel RF-MEMS packaging technology with lightweight, small size, and short electric path length. To achieve this goal, we used the ultra thin silicon substrate as a packaging substrate. The via holes lot vortical feed-through were fabricated on the thin silicon wafer by wet chemical processing. Then, via holes were filled and micro-bumps were fabricated by electroplating. The packaged RF device has a reflection loss under 22 〔㏈〕 and a insertion loss of -0.04∼-0.08 〔㏈〕. These measurements show that we could package the RF device without loss and interference by using the vertical feed-through. Specially, with the ultra thin silicon wafer we can realize of a device package that has low-cost, lightweight and small size. Also, we can extend a 3-D packaging structure by stacking assembled thin packages.