• Membrane and Water Treatment
• /
• v.10 no.4
• /
• pp.287-298
• /
• 2019

Lotus leaf has a special dual micro and nano surface structure which gives its highly hydrophobic surface characteristics and so-called self cleaning effect. In order to endow PVDF hollow fiber membrane with this special structure and improve the hydrophobicity of membrane surface, PVDF hollow fiber composite membranes was obtained through the immersion coating of poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) dilute solution on the outside surface of PVDF support membrane. The prepared PVDF composite membranes were used in the vacuum membrane distillation (VMD) for the desalination. The effects of PVDF-HFP dilute solution concentration in the dope solution and coating time on VMD separation performance was studied. Membranes were characterized by SEM, WCA measurement, porosity, and liquid entry pressure of water. VMD test was carried out using $35g{\cdot}L^{-1}$ NaCl aqueous solution as the feed solution at feed temperature of $30^{\circ}C$ and the permeate pressure of 31.3 kPa. The vapour flux reached a maximum when PVDF-HFP concentration in the dilute solution was 5 wt% and the coating time was kept in the range of 10-60 s. This was attributed to the well configuration of micro-nano rods which was similar with the dual micro-nano structure on the lotus leaf. Compared with the original PVDF membrane, the salt rejection can be well maintained which was greater than 99.99 % meanwhile permeation water conductivity was kept at a low value of $7-9{\mu}S{\cdot}cm^{-1}$ during the continuous testing for 360 h.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.5
• /
• pp.692-700
• /
• 2008

A trial was conducted to study the influence of different levels of a commercial enzyme complex on performance, nutrient availability, blood parameters, digestive tract measurements, amylase and trypsin activity of the digestive tract and gut morphology in broilers fed the typical diets in north China. There were four treatments: the control diet and the other three enzyme complex supplemented diets which were 180 mg/kg, 360 mg/kg and 720 mg/kg enzyme complex supplemented to the control diet, respectively. The birds fed the diets supplemented with 180 mg/kg and 360 mg/kg enzyme complex had better performance and nutrient availability, the activities of amylase and trypsin in the digestive tract in the two treatments were improved, the villus height and surface area of villus in the small intestine increased and the crypt depth and epithelial thickness of small intestine decreased. Relative weights of pancreas and relative weights and lengths of small intestine decreased. However, the addition of 720 mg/kg enzyme complex had no effects on these parameters and increased crypt depth and epithelial thickness of the small intestine. The data suggested that suitable supplementation of enzyme complex was beneficial for the birds, while excess enzyme complex inhibited secretion of endogenous enzyme and destroyed the structure of the small intestine.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.2
• /
• pp.183-195
• /
• 2003

In this study, the method of the finite element modeling for free vibration control of beam-type smart structures with bonded plate-type piezoelectric sensors and actuators is proposed. Constitutive equations for the direct piezoelectric effect and converse piezoelectric effect of piezoelectric materials are considered. By using the variational principle, the equations of motion for the smart beam finite element are derived. The proposed 2-node beam finite element is an isoparametric element based on Timoshenko beam theory. Therefore, by analyzing beam-type smart structures with smart beam finite elements, it is possible to simulate the control of the structural behavior by applying voltages to piezoelectric actuators and monitoring of the structural behavior by sensing voltages of piezoelectric sensors. By using the smart beam finite element and constant-gain feed back control scheme, the formulation of the free nitration control for the beam structures with bonded plate-tyPe Piezoelectric sensors and actuators is proposed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.7-17
• /
• 2015

In this paper, we propose a single antenna SSD(simultaneous single band duplex) system using turbo equalizer. The proposed system communicates simultaneously on single band. That is the proposed system is full-duplex system. The proposed system uses balanced feed network circuit to improve isolation in single antenna structure. Also, the proposed system uses RF(radio frequency) cancellation and digital cancellation to cancel self-interference. Additionally, the proposed system uses turbo equalizer to equalize ISI(inter-symbol interference) by harsh multipath fading and to collect bit errors by residual self-interference signals. By using turbo equalizer, the proposed system guarantees QoS(quality of service). In this paper, we uses Simulink simulation program to analyze performance of the proposed system. The simulation results confirm that proposed system can communicate simultaneously by using balanced feed network, RF cancellation, digital cancellation and turbo equalizer in harsh multipath channel on single band.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.91-96
• /
• 2008

In this paper, a monopulse fled for three mode $2{\times}2$ array feed horn antenna was designed. Gain of single feed was 8.25dB. Increasing property of gain and rectangular waveguide and reflection of free space is decreased because it has structure extending to electric plane at connected part from transformation to free space. When fled port1 and port2 is placed vertically and thickness of aperture hem is reduced, isolation is satisfied with property of lower -25dB. Also, at higher frequency, it is confirmed that isolation is improved. Combination of electric field occurs less influence because port1 and port3 is placed horizontally and distribution of electric field is connected to parallel. However, because of combination of electric field, it is more improved from 2dB to 6dB than isolation of port1 and port2. Direct combination occult less effect at port1 and port4 than effect of port2 and port3, it is lower -35dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1164-1170
• /
• 2005

This paper presents a dual-band, dual-polarized microstrip patch antenna with simple dual-probe feed. The inter-port isolation and cross-polarization are greatly improved by designing feed structure with annular gap between patch and feed-probe. Measured results show that the antenna's inter-port isolation and cross-polarization in each -10 dB return loss bandwidth of $1.84\;GHz\~l.93\;GHz$ and $2.62\;GHz\~2.81\;GHz$ are greater than 21 dB, greater than 22.2 dB and greater than 27 dB, greater than 19 dB, respectively. The antenna gain is about 6.9 dBi in both frequency bands.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1240-1247
• /
• 2010

This paper describes the study on the electrical design of a multi-beam large antenna for a satellite payload. This satellite antenna provides the universal communication and broadcasting services to personal portable terminals over the Korean Peninsula. The structure of the hybrid antenna fed by a feed array is proper to provide multi-beams. The amplitude and phase of each feed element should be optimized for a required beam and they can be obtained by GO (Geometrical Optics) and PO(Physical Optics) method. The number of feed elements are also optimized to meet the specification of EIRP(Effective Isotropically Radiated Power). The optimally designed antenna with the limited reflector size and minimum number of feed elements is shown in this paper.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.5
• /
• pp.630-639
• /
• 1998

In this paper, a T-shaped microstrip feed line is proposed for a better impedance matching to the microstrip slot antenna in a various range of slot widths. It was found that the bandwidth of this antenna is proportional to the slot width. It was also found that the radiation resistance of this feed line structure is quite constant and low regardless to the slot width. A slot antenna with T-shaped microstrip feed line is analyzed by using the FDTD method. At first, the propagation process of the reflected wave and the electric field distribution in the time domain is calculated respectively. The antenna parameters also are optimized to get maximum band width, return loss, input impedance, and radiation pattern in the frquency domain by Fourier transforming the time domain results. From the computed results, the optimum slot antenna is designed and fabricated. When the slot width is 16 mm, approximately 35% of bandwidths are obtained without a matching circuit. These computed results using FDTD method were in relatively good accordance with the measured values.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.1
• /
• pp.77-83
• /
• 1997

In this paper, we have studied internal quality including chemical compositions, microscopic structure and nonmetalic inclusion of test materials. We have analyzed dynamic characteristics of cutting force of milling including tensile strength value, hardness etc. Test materials are used in the tempered carbon steel and the non-tempered carbon steel. The obtained results are as follows: 1. In analyzing internal quality, the tempered carbon steel have typical martensite structure and the non-tempered carbon steel have ferrite + pearlite structure. 2. Yield strength, tensile strength and hardness value are in the non-tempered carbon steel but elongation is maximum value in the tempered carbon steel. 3. Cutting force is smaller non-tempered carbon steel than tempered carbon steel when feed speed and depth on cut is constant. 4. Cutting force is smaller non-tempered carbon steel than tempered carbon steel when cutting speed and depth of cut is constant.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.410-415
• /
• 2004

Heavy-weight head slides may cause excessive inertia impact ＆ moment on the machine tool structure when they move or stop abruptly during operation. Consequently these inertia impact and unbalanced moment bring transient vibrations and rough sliding motions on the machine structure. Machine tool engineers have tried many kind of feed-slide designs in order to solve this problem; for example, the design optimization of the moving structure for minimum weight and maximum stiffness, box-in-box type slide design, and so on. In this article, force and moment equilibrium equations regarding to the inertia force ＆ moment were derived for each one of a mold M/C's head slides. Furthermore, five different design configurations of head slide assembly were reviewed for its design improvement regarding to force ＆ moment calculations and finite element structural analysis results.