• Journal of Biosystems Engineering
• /
• 제19권4호
• /
• pp.329-342
• /
• 1994

In order to reduce the production cost and improve the quality of dairy feed, several dairy feed mill models suitable for Korean farm size were developed. 6 TMR models were developed for the 1000, 600, 200 head of dairy cattle, and evaluated for capital investments and production costs to suggest the best model. Followings are summary of this study : 1. TMR terminal models were designed that dairy production capacity of TMR1000 models are 40 ton/day, TMR600 model is 20 ton/day and TMR200 models are 10 ton/day. Also, they can be extended their capacity up to twice. 2. Capital investment of TMR terminal models is 145 million won for TMR200-1,205 million won for TMR600 and 609 million won for TMR1000-3 model. 3. The bigger TMR terminal model has the more advantage in production cost. The best model for 1000 head of dairy cattle farm was TMR1000-3 with 10,849 won/ton of production cost, TMR600 for 600 head of dairy cattle farm with 13,829 won/ton, TMR200-1 for 200 head of dairy cattle farm with 16,943 won/ton of production cost, so feed production cost for the 200 head farm was 50% higher than 1,000 head size farm.

• Food Science and Biotechnology
• /
• 제15권4호
• /
• pp.506-510
• /
• 2006

To be used as a source of astaxanthin by animals, the red yeast Xanthophyllomyces dendrorhous needs to be dried and the cell wall ruptured. Spray-drying and flat-roller milling successfully prepared the yeast as a feed additive with little loss of astaxanthin. Spray-drying successfully dried the yeast with negligible decomposition of astaxanthin compared to drum-drying. By repeated milling with a flat-roller mill, astaxanthin extracted with ethanol increased from 0.01 to 1.31 mg astaxanthin/g yeast. This method did not decompose astaxanthin in contrast to chemical digestion of the cell wall. Flat-roller milling effectively flattened and cracked the dried cells. Astaxanthin in yeast prepared by spray-drying and flat-roller milling was well absorbed by animals. Specifically, when spray-dried and milled yeast was supplied in the feed (40 mg astaxanthin/kg feed), astaxanthin was successfully absorbed (1,500 ng/mL blood and 1,100 ng/g skin) by laying hens.

• 대한환경공학회지
• /
• 제22권6호
• /
• pp.1139-1148
• /
• 2000

산업 폐기물 중 다량으로 발생하는 제강슬래그의 재활용을 위하여 -14/+24mesh 정도 크기의 슬래그를 미분말로 분쇄시 최적 조건을 조사하고 경제적인 분쇄조건을 확립하기 위하여 요구되는 동력을 산출하였다. 이를 위한 분쇄조건으로 ball mill의 회전속도, 분쇄시간, ball의 충진량, 시료의 충진량과 크기 등을 선정하였고 이에 대한 분쇄효율을 산출하였다. 본 연구에서는 임계회전속도의 79% 정도에 해당되는 값이 최적의 회전속도인 것으로 조사되었다. 분쇄시간에 따른 분쇄정도는 일반적으로 시간이 증가함에 따라 증가하는 것으로 나타났지만 분쇄 초기에 비해 분쇄가 더 진행될수록 분쇄효율은 감소하는 것으로 나타났다. Ball의 충진율은 mill내부 용량의 50%인 경우에 최척의 분쇄효율을 보였고, 시료의 충진량과 크기에 따른 입도초사 실험 에서는 시료의 충진량이 적고 원시료의 크기가 작을수록 분쇄정도는 증가하였다. 위의 결과에 의해 Bond의 식을 사용하여 동력효율을 계산한 결과 분쇄시간이 길수록 그리고 회전속도가 최적인 조건에서 동력효율이 가장 크게 나타나고 있음이 관찰되었다.

• 한국자동차공학회논문집
• /
• 제24권1호
• /
• pp.67-73
• /
• 2016

The application of titanium has been gradually rising because the utilizing ranges for low weight and high strength are rapidly increased by the need for improving the fuel economy in production industries such as the aviation and automotive in recent. The purpose in this study is to investigate the appropriate cutting conditions on the life of flat and round end mills by measuring the maximum cutting temperature relative to the machining time, and calculating the wear rates of cutting tool with the spindle speed and feed rate of vertical machining center as a parameter in the titanium roughing cut machining which is widely used in critical parts of aircraft, cars, etc. When the wetted roughing cut machining of titanium with a soluble cutting oil is conducted by the flat and round end mills, the maximum cutting temperatures for a variety of spindle speed and feed rate are measured at ten-minute intervals during 60 minutes by an infrared thermometer, and the wear rates of cutting tool are calculated by the weight ratios based on tool wear before and after the experiment. It is found that the maximum cutting temperature and the wear rates of cutting tool are raised as the cutting amount per tool edge is increased with the rise of feed rate, in this experimental range, and as the frictional area due to the rise of contacting friction numbers between tool and specimen is increased with the rises of cutting time and spindle speed. In addition, the increasing rate of maximum cutting temperature in the flat and round end mills are the highest for the cutting time from 50 to 60 minutes, and the wear rate of cutting tool in the flat end mill is 1.14 to 1.55 times higher than that in the round end mill for all experimental conditions.

• 한국가금학회지
• /
• 제33권3호
• /
• pp.239-248
• /
• 2006

발효가 가능한 탄수화물을 이용하거나 효소 이용 및 사료가공 등에 관한 이해를 증진시키는 길은 닭의 분중 휘발성 유가물질의 감소를 가져올 수 있다. 전분질의 소화는 가루사료를 (밀과 보리) 알곡으로 대치하게 하였다. 그러나 근위의 pH로 볼 때 사료의 종류나 형태는 연속성이 떨어진다. 펠렛으로 만든 사료는 사료 요구율이 $0\siml2%$ 증진된다. 전분질의 소화는 xylase를 첨가하였을 때 대사 에너지(ME) 가는 35% 증진 효과가 잇는 것으로 보고되었다. 전분질의 이용과 전분질이 아닌 다당류(NSP)의 이용은 전분질을 포함한 알갱이 사료의 존재 즉 비 영양소 물질(ANF)의 포함 여부에 달려 있다. 사료 생산 기술의 증가는 $33^{\circ}C$에서 만들어지는 펠렛 사료에 이용될 수 있는 건조된 상태의 효소나 액체상태의 효소 생산 기법에 달려 있다. 수용성 NSP나 arabinoxylans 또는 beta-glucan 등은 부분적으로 효소 가격이 크기로 나누어지는 정도에 따라 달라진다. 적은 크기는 수분 흡수력이 감소되어야 하는데 만약 수분 흡수력이 지나치면 소화물에 수분이 너무 많아지게 되어 분에 수분 함량이 많아지며 사료 곡물 중에 비스코시티 현상이 생겨서 계란 껍질이 지저분해진다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권6호
• /
• pp.803-811
• /
• 2009

The chemical composition and water extractable dry matter (DM) of foliages from Erythrina (Erythrina variegata), Fig (Ficus racemosa), Jackfruit (Artocarpus heterophyllus), Jujube (Ziziphus jujuba Mill), Kapok (Ceiba pentandra) and Mango (Mangifera indica) and the feed intake, digestibility and N retention when feeding these foliages were studied in two experiments. In Experiment 1, 12 male goats, 3.5 months old and weighing 14.6 kg, were randomly allocated to a diet consisting of one of the foliages in a change-over design with three periods. The foliages were offered ad libitum at the level of 130% of the average daily feed intake. The Erythrina foliage had a low content of DM and condensed tannins (CT) and a high concentration of crude protein (CP) in leaves plus petioles (193 g/kg DM) and stem, while the Mango foliage had a low CP (69 g/kg DM) and high DM content. The other foliages were intermediate. High content of CT was found in the leaves plus petioles of Jackfruit foliage and in the stem of Fig and Mango foliage. There was a difference in feed intake, nutrient intake, apparent digestibility and N retention between the foliages, with Erythrina, Jackfruit and Kapok foliage being significantly higher in these parameters than Fig, Jujube and Mango foliage. The water extractable DM could be used to estimate N retention, but not DM digestibility in this study. In Experiment 2, 4 male goats weighing 13.4 kg and 6 months old were allocated to a 4${\times}$4 Latin square design. The treatments were: water spinach ad libitum and Fig, Jujube or Mango foliage ad libitum +0.5% of BW as water spinach DM. Feed intake, apparent digestibility and N retention were not significantly different among the foliage diets, but higher than for water spinach alone (p<0.05). Supplementation with water spinach to a diet consisting of low quality foliages such as Fig, Jujube and Mango, increased DM and CP intake, apparent digestibility and N retention, compared to feeding these foliages as sole feeds.

• Journal of Biosystems Engineering
• /
• 제35권2호
• /
• pp.91-99
• /
• 2010

A Model of small scale total mixed rations(TMR) plant which can be utilized round bales was developed, tested and analyzed in this study. This study consist of two parts. One is development of a small scale TMR plant model which was already reported at the previous paper. This is the second part of the study. For the study, a series of tests of the model plant were performed and its costs was analyzed. Also, the break-even point of the model plant by comparing with market price of commercial TMR feed was determined. Results of the research are summarized as follows ; As the results of mixing test, the average coefficient of variation(CV) value for mixing of the feed was 13.0 % at the gate of the mixer. The production cost was estimated as 8,298 won/head for dairy cattle farm and 2,495 won/head for beef cattle farm, when producing 8 batch a day. Also, it is recommended to utilize the model plant when farm size is over 79 heads for dairy cattle farm and 113 heads for beef cattle farm. As an overall conclusion, the model plant designed for farm size TMR feed mill will be very useful model for both beef cattle and dairy farms in Korea. Also it is expected that the capital investment for the model plant can be recovered with 8 months compare with purchasing commercial TMR feed if the model plant feeds 1,000 beef cattle approximately.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.1017-1020
• /
• 2002

The pure Ti is taken annealing process for one hour at 90$0^{\circ}C$. The pure Ti is sufficient for ASTM B348 Grade2. The rolling mill roll the Ti-8Ta-3Nb(wt%) which became vacuum melting in arc furnace until the length is about 45mm and the thickness is about 6.05mm. Then it is made 6mm$\times$6mm$\times$44mm by wire cutting with EDM and it is made ∮ 6mm by rough cutting with the general purpose lathe. The machining accuracy of implant parts in the dental and medical science are decided by dimension, shpe, straightness, surface roughness. It is difficult to cut for the Ti alloy. It is caused problems of straight degree and surface roughness to the Ti alloy have many cases which length is smaller than diameter in cutting. Total 24 specimens different kind of 4 alloies are used in experiment to gain a cutting property. According to the cutting velocity, cutting depth, cutting temperature, feed and clearance angle experiments are performed. Conclusively it is expected that cutting depth of 0.5mm, feed velocity of 0.07mm/rev and cutting velocity of 80m/min could make a suitable result.

• 유기물자원화
• /
• 제14권4호
• /
• pp.104-112
• /
• 2006

지렁이 사육상을 조성하는데 있어서 적정한 초기 지렁이 입식 밀도를 추정하기 위해서 단위 면적당 서로 다른 밀도의 지렁이($1m^2$의 사육상 면적당 지렁이 1, 2, 3, 5kg)를 입식하여 12kg의 먹이를 반복 급이하면서 그의 개체군 밀도 변화를 조사하였고, 효율적인 먹이급이량을 추정하기 위하여 최고 한계에 근접한 지렁이 밀도($5kg/m^2$)에서 먹이급이량을 달리하였을 때($1m^2$의 사육상 면적당 먹이 16, 24, 32, 40kg) 먹이섭식속도를 조사하였다. 지렁이 구입비용, 노동비용 등을 고려하였을 때, 지렁이 사육상을 조성하기 위한 초기 입식밀도는 사육상 면적 $1m^2$당 2kg 이하로 하는 것이 합리적인 것으로 판단된다. 지렁이 사육상에 지렁이 밀도가 최고밀도에 근접한 이후에는 단위 사육 면적당 1회에 투입되는 먹이량은 $40kg/m^2$정도인 것이 그 보다 적은 경우보다 지렁이 증식과 먹이급이를 위한 작업효율 측면에서 유리하였다.

• 한국초지조사료학회지
• /
• 제36권4호
• /
• pp.271-279
• /
• 2016

본 연구는 IRG의 사료 가치 및 보관성 향상을 목적으로 소형 펠렛밀의 동력 구동방식 및 함수율이 IRG 펠렛의 성형 특성 및 품질에 미치는 영향을 규명하기 위해 실시되었다. IRG의 펠렛 형성은 재료의 함수율에 큰 영향을 받았다(p<0.05). 펠렛밀의 종류별로 약간의 차이는 있지만, 함수율 25% 조건이 외관, 부하량 및 온도 변화를 고려했을 때 IRG 펠렛 성형에 가장 적합한 것으로 나타났다. 펠렛의 경도는 펠렛밀의 종류에 관계없이 함수율이 높을수록 낮아지는 경향을 보였다. 15~25% 조건의 함수율이 내구도에 미치는 영향은 적었지만, 함수율 25% 조건에 비해 30% 조건에서는 내구도가 급격히 떨어지는 결과를 보였다 (p<0.05). 펠렛밀의 종류와 함수율에 관계없이 IRG 펠렛 성형전에 비해 성형 후에 건물 함량이 높아졌으며(p<0.05), 펠렛 성형과정에서 발생되는 압축열과 재료의 급격한 수분 손실로 인해 총 세균수는 크게 감소되는 결과를 보였다. 따라서 본 연구의 결과에서 IRG 펠렛 형성에 바람직한 함수율은 25%로 나타났으며, 원형 펠렛밀 보다는 수평형 펠렛밀 특히, roller 구동의 수평형 펠렛밀이 IRG 펠렛 형성에 유리한 것으로 판단된다. 또한 IRG에 대한 펠렛 성형은 IRG의 사료 가치 및 장기 보관성 향상에 긍정적인 방법인 것으로 사료된다.