• 한국의학물리학회지:의학물리
• /
• 제14권4호
• /
• pp.211-217
• /
• 2003

주성분분석은 잘 알려진 데이터 분석 방법으로써 높은 차원의 데이터를 낮은 차원의 데이터로 표현하는데 효과적이어서 얼굴인식, 데이터 압축 등에 이용되고 있다. 주성분분석을 하게 되면 원 데이터의 공분산 행렬로부터 정규직교한 고유벡터와 해당하는 고유치를 얻게 되고 그 중 큰 값을 가지는 고유벡터 들을 선택하여 선형 변환함으로써 데이터의 차원을 줄일 수 있게 된다. 망막에 빛 자극이 인가되면 시세포 층에서 전기신호로 변환된 후 복잡한 신경회로를 거쳐 최종적으로 신경절세포 층에서 활동전위의 형태로 출력되게 된다. 본 연구에서는 다채널전극을 사용하여 여러 개 망막 신경절세포로부터 유래되는 활동전위를 기록한 후 개개의 신호를 구분하는 과정을 거치고, 이어서 그 신호를 만들어 내는 각 뉴론들끼리의 시간적, 공간적 흥분발사 패턴을 이해함으로써 궁극적으로 시각정보 인코딩 기전을 밝히려는 연구 목표하에 그 첫 단계로서 망막 신경절세포의 활동전위를 기록한 후 분류하는 과정을 성공적으로 수행하였기에 그 내용을 서술하고자 한다. 망막에서 기록되는 신경절세포 활동전위는 불규칙하고 확률적이기 때문에 주성분분석을 통하여 그 유형을 분류할 수 있었다. 토끼 눈으로부터 망막을 박리하여 망막조각을 얻은 후 신경절세포 층이 전극표면을 향하도록 전극에 부착하였다. 8${\times}$8의 microelectrode array (MEA)를 전극으로 사용하였고, 증폭기는 MEA 60 system을 사용하여 신경절세포 활동전위를 기록하였다. 활동전위 기록 후 파형 분류를 하였다. 잡음이 섞여있는 기록으로부터 신호를 검출하기 위하여, 잡음역치($\pm$3$\sigma$)를 설정하였다. 역치를 넘는 파형 만을 획득한 후 주성분분석을 통해 각 파형의 첫 번째 주성분, 두 번째 주성분을 계산하여 2차원 평면에 투사함으로써 몇 개의 의미있는 클러스터를 얻었다. 이 클러스터는 곧 각 신경절세포에서 유래되는 파형을 반영하므로 주성분분석을 통하여 망막 신경절세포의 활동전위를 각 세포별로 분류할 수 있음을 확인하였다.

• 한국지구과학회지
• /
• 제28권2호
• /
• pp.187-201
• /
• 2007

한반도에서는 처음으로 동해안으로부터 서해안까지 한반도를 횡단하는 측선을 따라 자기지전류 탐사를 수행하였다. 한반도의 주된 지구조 방향인 지나방향$(N30^{\circ}E)$에 수직하게 설정된 240 km 측선을 따라 $3{\sim}8km$의 측점 간격으로 50 측점에서 자료를 획득하였다. MT 임피던스는 지역에 따라 뚜렷이 구분되는 반응이 나타나며 경기육괴, 옥천대, 경상분지 서쪽 지역, 경상분지 동쪽지역에서 각기 다른 경향의 반응을 보인다. 경상분지 서쪽 지역에서는 수백 ohm-m의 전기비저항과 $3{\sim}8km$의 두께를 가지는 퇴적층이 존재하며, 퇴적층 하부에서 $1{\sim}30$ ohm-m의 매우 낮은 전기비저항을 가지는 고전도층이 발견되었다. 옥천대에서의 자료는 위상이 $90^{\circ}$를 초과하는 매우 특이한 반응을 보이고 있으며 이러한 특이성은 매우 강한 이방성 매질의 영향에 기인하는 것으로 추정된다. 경기 육괴와 경상분지 동쪽 지역은 상부지각을 구성하는 매질이 비교적 높은 전기비저항을 가지는 매질로 이루어져있기 때문에 심부 지전기 구조를 들여다 볼 수 있는 창의 역할을 한다. 1차원 모델을 적용하였을 때 경기육괴의 경우 13 km, 경상분지 동쪽지역의 경우 18 km 두께를 가지는 층이 존재하는데 이 층이 상부지각에 해당하는 것으로 생각된다.

• 트랜스-
• /
• 제1권
• /
• pp.21-44
• /
• 2016

본 논문은 광고와 무용이 어떤 기호를 통해 의미를 전달하는지, 그리고 광고 안에서 그려지는 무용과 무용수의 모습이 가진 기호적 의미는 무엇인가를 파악한다. 이를 위해 무용으로 표현된 기호들이 광고의 목적에 부합하는지를 알아보고, 무용 그 자체의 기호적 의미를 재평가함으로써 일반 대중이 무용을 수용하는 방식과 모습을 발견하고자 한다. 이를 위해 광고 관련 제작자 및 연출가의 관련 자료를 확보 하였으며, TV광고에 나타난 신체기호로서의 무용의 이미지를 분석하고 연구목적과 관련된 선행연구와 이미지 및 효과를 분석한다. TV광고 분석은 TVCF 홈페이지, www.TVCF.co.kr 자료를 참고로 연도별 광고에 활용된 무용분야의 빈도수 중 가장 많을 때인 2008년 TV광고4편 남광토건, 롯데백화점(프리미엄세일/상품권), 현대자동차산타페- 필로볼러스(Pilobolus), 2011년 1편 PNS더존샤시- 아레나 디 베로나(Arena di Verona)로 제한한다. 또한 각각의 광고를 반복적으로 본 결과 중요하다고 판단되는 것을 기준으로 무용수의 움직임이나 통선이 크게 바뀌는 부분과 화면 문구가 변경되는 부분을 중심으로 분석한다. 무용의 이미지 분석은 신제 이미지(선, 의상, 표정), 무용 이미지(움직임의 형태, 질적 특성, 춤의 분위기)에 따른 구조를 살피는 방식으로 이루어 졌다. 그 결과 TV광고에 나타난 기호적 무용이미지는 다음과 같이 논의 될 수 있다. 첫째, 무용을 활용한 광고에서 무용이 가진 상징과 기호가 광고하려는 물질적 대상에 일치한다. 예컨대 이용우가 출연하는 TV광고에서 그의 기표로서의 움직임은 빠른 턴, 점프, 아쌈블레, 터닝 점프, 슬라이딩 등을 통해 남광토건 기업의 미래의 도전이라는 기의를 알 수 있다. 둘째, 발신자의 의도에 따른 무용수의 신체 이미지는 일반적으로 일치하는 반면, 무용 이미지의 경우 다소 차이가 있음을 알 수 있다. 이는 TV광고에 나타나는 기호적 무용의 이미지는 대중들로 하여금 시청함과 동시에 무의식적으로 인지하도록 한다. 특히 TV프로그램 중에서도 광고는 선택의 여지와는 상관없이 하나의 광고만을 시청하기보다는 방송사측에서 편성된 프로그램의 방영으로 부득불 자주 노출되며 이로써 오랜 시간 머릿속에 잔상으로 남게 됨으로 수신자 개개인의 생각과 특성여부에 따라 달리질 수 있다. 이처럼 광고는 일반인들이 예술문화를 생활 속에서 자연스레 흡수할 수 있게 하는 매개체이며, TV 광고를 통한 대중예술의 전파는 소수계층에게만 수용되었던 순수예술을 대중에게 폭넓게 노출시킴으로써 오늘날 진정한 대중문화로서의 예술로 승화시킬 수 있으리라 생각된다.

• Tuberculosis and Respiratory Diseases
• /
• 제45권2호
• /
• pp.341-350
• /
• 1998

연구배경: 기도가 수축제에 노출되어 좁아지는 성질이 증가된 상태를 기관지 과민성 (airway hyperresponsiveness)이라 하며, 메타콜린 기관지 수축 유발검사에 의한 기관지 과민성 검사는 천식환자의 진단에 널리 이용되고 있다. 기관지 감수성 (bronchial sensitivity)은 주어진 기도 반응, 즉 기관지 수축을 일으키기 시작하는데 요구되는 기관지 수축제의 농도로 표시되며, 기관지 반응성 (bronchial reactivity)은 기관지 수축제의 연속적 흡입에 따르는 기도 수축 반응의 증가로, 용량반응곡선의 기울기로 표현된다. 천식환자는 기관지 감수성 뿐만 아니라 기관지 반응성도 정상인과 큰 차이가 있으며 기관지 반응성이 기관지 감수성보다 더 두드러진 특정으로 지적되기도 한다. 이에 저자는 천식환자에서 임상양상의 경중도와 기관지 감수성 및 기관지 반응성 사이의 관계를 알아보기 위하여 본 연구를 시행하였다. 방 법: 1996년 1월부터 12월까지 이대 부속병원에서 메타콜린 기관지 수축 유발검사를 시행 받은 천식환자 56명을 대상으로 임상상태에 따라 경증, 중등증 및 중증으로 구분하였다. FEV1이 20% 감소하는 PC20에 도달한 후, 메타콜린 농도를 1회 더 높여 FEV1이 40% 감소하는 PC40을 측정 또는 유추하였으며 용량반응곡선에서 PC20와 PC40을 연결한 직선의 기울기를 기관지 반응성으로 측정하였다. 결 과: PC20는 경증군, 중등증군, 중증군에서 각각 1.83mg/ml, 0.96mg/ml, 0.34mg/ml이었다. PC40는 경증군, 중등증군, 중증군에서 각각 7.17mg/ml, 2.34mg/ml, 0.75mg/ml이었다. Reactivity(A)는 경증군, 중등증군, 중증군에서 각각 $24.7{\pm}17.06$, $46.1{\pm}22.10$, $59.0{\pm}5.82$였다. PC20와 Reactivity사이에는 유의한 역상관관계가 있었다.(r= -0.70, P<0.01) 결 론: 이상의 결과로 기관지 천식환자는 임상증상이 심할수록 PC20가 낮을 뿐 아니라 반응곡선의 기울기도 커서 기관지 감수성과 반응성 사이에는 유의한 역상관관계를 보였다. 그러나 일부 PC20가 유사한 환자 중에서 기관지 반응성이 큰 차이를 보이는 경우가 있으며 이에 따라 임상경과도 큰 차이를 보였다. 따라서 메타콜린 기관지 수축 유발 검시를 시행할 때 PC20와 기관지 반응성을 함께 측정하면 환자 상태의 평가와 임상 경과의 예측에 있어서 더 많은 정보를 얻을 수 있을 것으로 생각된다.

• 한국해양학회지:바다
• /
• 제24권2호
• /
• pp.318-331
• /
• 2019

HYCOM 재분석 자료를 이용하여 동해에서 2003년과 2014년에 장기간 지속되었던 두 개의 난수성 에디를 선정하여 각각 WE03과 WE14로 명명하고 비교 분석하였다. 두 난수성 에디가 형성되는 시기는 동한난류가 평년에 비해 북상하는 것으로 나타났으며, 이들 난수성 에디는 동한난류와 아한대전선의 상호작용을 통해 상대적으로 수심이 얕은 한국대지 해역에서 생성되었다. 겨울철 연직 혼합에 의해서 난수성 에디의 중심부는 수심 150 m까지 $13^{\circ}C$, 34.1 psu 가량의 균질한 특성을 보였다. WE03이 생성된 후 이듬해인 2004년에 대한해협 서수도를 통해 동해로 유입되는 해수의 양이 평년에 비해 많았으나 WE14가 생성된 후 이듬해인 2015년에는 대한해협 서수도를 통해 동해로 유입되는 해수의 양이 평년에 비해 많지 않았다. 이에서 대마난류가 난수성 에디에 열과 염을 공급하지만, 난수성 에디의 장기 지속에는 큰 영향을 미치지 않음을 알 수 있다. 두 난수성 에디는 울릉도 부근에서 1년 6개월 이상 유지되었는데, 두 에디의 이동경로에 있어 특별한 공통점은 보이지 않았다. 울릉분지 부근에서는 동한난류의 사행 등으로 크고 작은 에디가 계속 생성된다. 장기간 존속하는 난수성 에디는 특별한 외적 요인에 의해서 생성되는 것이 아니라, 동한난류 또는 동한난류가 사행하는 과정에서 생성된 에디와의 상호작용을 통해 생성된 것으로 보인다. 동한난류가 평년에 비해 북상했던 시기에 장기간 지속된 난수성 에디가 항상 발생하지는 않았다는 점이 위와 같은 결론을 뒷받침한다.

• 한국전통조경학회지
• /
• 제29권4호
• /
• pp.27-39
• /
• 2011

본 연구는 경남 진주시 용호정원에 조성된 무산십이봉이 전통적 축산(Mount)의 원형이자, 지형의 단조로움을 극복하고 변화와 흥미를 유발할 수 있는 설계요소라는 전제 아래 시작되었다. 또한 연구 결과가 축산되는 유사공간의 재현 및 현대적 변용에 필요한 자료 및 시사점을 제공할 수 있을 것이란 기대 또한 크다. 무산십이봉 축산을 통해 조영자가 추구하고자 했던 12봉우리의 상징성과 공간구성원리 그리고 시각구성상의 기능 및 효과를 조망경관적 측면에서 분석 또는 해석한 본 연구의 결과는 다음과 같다. 용호정원의 핵심인 용호지는 비보 풍수적 차원에서 만들어진 인공혈구의 전형적 사례로 풍수형국의 완결을 위한 비보(裨補)의 장치이자 용과 관련한 지명의 연계를 통해 온전함을 강화시키고자 했던 산물이다. 축산의 크기는 높이 2~3.5m, 지름 약 6~12m정도의 오성상 금성산형을 하고 있으며, 봉우리의 높이는 1.9~3.2m, 평균값은 2.5m로 밝혀졌다. 봉우리의 면적은 $35{\sim}138m^2$의 범위에 있고, 면적 평균값은 $73.4m^2$로 나타났으며 이에 비례한 체적은 $30.7{\sim}115.0m^3$, 그 평균값은 $62.5m^3$으로 추산되었다. 용호정과 소선 그리고 본채 터 및 용산재의 일치된 축에서도 알 수 있듯이 선과 속의 의미 부여를 통해 용호지를 피안의 세계로 상정하였으며, 조영자는 무산십이봉의 형상을 구현시키기 위한 의도로 호두 자리에서 대응되는 지점과 교차되도록 용의 골격을 형상화한 12개의 봉우리를 축산하고, 그 중심에 '여의주를 문 용이 욱일승천(旭日昇天)하는 형상'의 무산십이봉과 용호정을 배치한 것으로 보인다. 무산십이봉 주변 중경권역은 남북으로 금성산형의 산봉으로 둘러싸여, 용호지를 중심으로 동질감을 유지한채 다층의 층위구조를 보이는 바, 이는 유사 형태조화에 기인하며 무산십이봉의 조성 시 기획된 축산의도라 사료된다. 무산십이봉 축산에는 은폐와 노출을 통한 점진적인 경관연출과 전망-은신처이론 그리고 틀에넣기 기법 등의 공간 질서가 깊숙이 내재되어 있는데, 이는 무산십이봉 각 봉우리의 노출과 둘러싸임 정도의 다양함, 전망과 시선차단 조합의 다채로움을 통해 경관의 심도와 기대감을 높이고자한 의도가 반영된 것으로 보인다. 무산십이봉에 의해 '닫힌경관'은 흥미롭고 생기 있으며 매력적인 경관인식을 배태(胚胎)하는데, 특히 축산은 용호지와 용호정 주변에 관한 경관의 심도와 흥미를 불러일으키는 지형설계적 차원에서 매우 유용하게 작용하고 있다. 더불어 용호정에서 조망하였을 때 섬을 통해 또 다른 섬이 보이도록 하는 중층적 노출효과를 의도해 특수한 위치를 배려한 경관짜임의 결과인 12개 봉우리의 묶음이 이루어졌음을 확인하였다.

• 대순사상논총
• /
• 제33집
• /
• pp.319-349
• /
• 2019

본 논문에서는 세계만물과 생명 그리고 인간에 대해 단계적으로 언급함과 동시에 리·기·신에 대한 개념을 통해 대순사상에서의 생명관과 인생관을 정립하고자 하였다. 이에 기존에 연구된 대순사상의 생명관, 죽음관, 인생관을 대순사상의 원전과 검토하여 기존 연구의 한계점을 살펴보는 한편, 성리학의 본체론 및 발생론과 비교하여 대순사상에서의 특질을 밝히고자 한다. 전개에 있어 II장에서는 만물과 생명의 본원으로서 대순, 태극의 주재로서 상제, 만물의 구성을 논하였고, III장에서는 생명의 발생과 신과의 관계, 생명을 구성하는 생리와 생기, 생명의 목적을 언급하였으며, IV장에서는 생명의 한 범주인 인간과 이러한 인간이 삼계에서 가지는 존재론적 위상과 인생의 목적에 대하여 서술하였다. 생명에 관한 논의에 앞서, 태극과 상제를 대순의 개념으로 아울러 상정하고 이를 생명의 근원인 본체가 됨을 언급하였다. 개개 생물은 리·기·신을 통해 그 구조를 설명하였다. 또한 생리와 생기를 통해 그 생명의 속성과, 상제지심인 인을 구현하는 것으로 생명의 목적을 말하였다. 특히, 본 논문에서 기존의 생명에 대한 담론과 가장 차이나는 부분은 기존에 신을 생명 그 자체로 여겨 생명유무의 범주로 귀속시킨 것에 반하여, 기능과 작용적 측면의 본체로서 신을 상정하여, 존재를 그 존재로서 지속시키는 작용의 본체로 보았다는 점이다. 이러한 논의는 대순사상이 비록 성리학의 본체론과 발생론에 있어 유사성이 있지만, 신의 개념에 있어서 태극을 주재하는 인격적 상제를 상정하고 개개사물에 있어 리를 구현하는 신명들의 존재를 부각시킨다는 점에서 사상적 독창성을 언급한 것이다. 인간도 생물과 마찬가지로 생리와 생기를 갖추어 태어나며, 인간안의 내재신은 기를 주관하는 주체로서 작용한다. 인간은 세계를 구성하는 삼계의 한축을 담당하며 세계에 있어 중요한 존재로 인식되고 있다. 그러한 대순사상에서 인간의 존귀성이 잘 드러나는 것은 하늘과 땅에 이어서 인간에 신이 봉해진다는 '신봉어인(神封於人)'의 개념이다. 이는 진멸지경의 인간을 천지가 요구하는 인간으로 고쳐 쓰기 위함으로, 궁극적으로 신인조화를 통해 신봉어인의 시대를 구축하기 위함이다. 인간에 있어 이러한 가능성은 마음에 신대를 가지고 있음으로 가능한 것이다. 수도에 있어 인간과 외재신과의 소통과 조화(調化)는 인간의 체질과 성격의 변화를 유도함이라고 볼 수 있지만 종국에는 그 인간의 기국에 알맞은 신명을 봉하기 위함이다. 상제의 명과 선령신의 공 그리고 천지의 기를 통해 인간은 태어났다. 인존시대와 천운구인시대를 맞이한 현 시대의 인간은 천지에 쓰임에 기여하기 위함을 인생의 목적으로 가진다고 볼 수 있다. 이런 목적을 달성하기 위하여 인간에게 가장 요구되는 것은 하늘로부터 부여받은 자신의 성리를 온전히 실현하는 것이다. 자신의 성리를 실현함은 사회적으로 볼 때 남에게 덕을 베푸는 것으로 이는 상제의 천명인 생생지리를 구현함이다. 나와 타물, 나와 타인 그리고 인간과 신명사이의 상생은 해원상생과 보은상생으로 완성되며, 이렇게 자신의 본성을 지극히 하여 온전히 드러낼 때 심령에 통하게 되고, 인존의 경지에 오르게 되는 것으로 볼 수 있다.

• 한국해양학회지:바다
• /
• 제29권1호
• /
• pp.56-76
• /
• 2024

동해에서 수행된 국내 최장기 수중글라이더 운용 및 연속 단면 관측 결과를 보고한다. 본 연구팀은 수중글라이더를 활용하여 2020년 9월 18일부터 12월 21일까지 총 95일 동안 국립수산과학원(NIFS) 정선 관측 106 라인에 거의 일치하는 37.9 °N 위도선을 따라 동경 129.1 °E ~ 131.5 °E 사이를 6회 왕복하는 국내 최초의 연속 물성 단면 관측을 성공리에 수행하였다. 본 수중글라이더는 2020년 9월 18일 129.1 °E 위치에서 투하되어 9월 19일부터 88일간의 비행 관측을 수행하였고, 2020년 12월 15일부터 6일간 129.2 °E 위치에서 위치 제어 유지(Virtual Mooring)후 회수되며 전체 운용을 마무리하였다. 표층부터 800 dbar 수심까지 톱니형태의 궤적을 그리면서 총 수평거리 2550 km를 비행하는 동안 글라이더의 경로 이탈은 RMS 거리 262 m를 벗어나지 않을 정도의 매우 안정적인 경로 추종 모드를 보여줬다. 비행 관측을 통해 획득한 총 12개의 고해상도 물성 횡단면 자료로부터 수온과 염분의 연속적인 변동이 보이는 아중규모 특성을 확인하였고, 국립수산과학원(NIFS)의 격월 선박 관측 자료와 비교함으로써 시공간 해상도 차이에 따른 뚜렷한 특성을 발견하였다. 첫째는 공간 해상도 차이에 따른 결과로 표층 전선역의 세기 및 이동, 수온약층 강화현상 등 아중규모 현상들이 글라이더 횡단면 자료에서만 뚜렷하게 관찰되었다. 이러한 아중규모 구조는 현행 선박 관측 자료의 정점 간격(25 km) 보다 작다는 특징이 있었는데, 동해 내 아중규모 구조의 이해를 위해서는 고해상도 관측이 필요함을 의미한다. 둘째는 시간 해상도 차이에 따른 결과로 글라이더 자료에서 추출한 평균 7일 간격의 수온과 염분 시계열이 대략 6주 주기를 갖는 월중변동(Intramonthly variation) 특성을 보인다는 것과 대략 1주 동안 급격한 관측치의 변동이 나타난다는 것을 확인하였다. 이는 격월 정선 관측 자료에는 확인되지 않는 특징이다. 따라서, 정선 관측해역의 물성 변동을 이해하기 위해서는 선박 관측과 비교하여 상대적으로 비용이 저렴하고 효율적인 글라이더 관측을 통한 보완이 필요하다고 여겨진다. 마지막으로 두 플랫폼 간 관측치의 편차를 확인하였는데, 이러한 편차의 요인을 공간 규모에 기초한 정점의 정의 및 시간 규모에 따른 변동성, 그리고 각 플랫폼의 CTD 측정 장비의 교정 관점에서 논하였다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.