• Economic and Environmental Geology
• /
• v.18 no.4
• /
• pp.343-355
• /
• 1985

Spectral reflectivity and microhardness were measured quantitatively on polished surfaces of a selection of bireflecting minerals obtained from several well known metallic deposits. Incremental errors are much higher than decremental errors and errors were found to be lowest in the spectral region close to the green wavelength ($544m{\mu}$). The characteristics of the spectral profile are significant in their control of white light color. The covellite and graphite have reflectivity profiles similar in shape for each principal direction, showing noticeable difference in magnitude between the profiles: The spectral reflectivity of covellite parallel to the extraordinary vibration is higher (R$$\simeq_-$$10%) than that parallel to the ordinary vibration and graphite shows opposite feature. Reflectivity of the enargite and famatinite cut parallel to the cleavage plane is always higher (R$$\simeq_-$$5%) than that of the section cut normal. The optical symmetry of 5 bireflecting minerals was determined by noting the variation in reflectivity at $544m{\mu}$. The data indicate that covellite is optically uniaxial positive and graphite is optically uniaxial negative. The Rm values for enargite and famatinite are clearly closer to the minimum value for the mineral ($R_1$) than to the maximum value ($R_2$) : the minerals can be recognized as optically biaxial positive. Enargite and famatinite cut parallel to cleavage have much higher hardness values (HV=> $200kg/mm^2$) than those cut normal to cleavage. Vickers indentations exhibit characteristic features for all the bireflecting mineral species studied. Broad radicle groupings of the mineral species can be made with regard to the reflectivity microhardness numbers.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.4
• /
• pp.223-231
• /
• 2012

The purpose of this study is to investigate basically the mechanism of heat transfer by the resolution of complex fluid flow inside a sophisticated designed screw dryer for the treatment of sewage sludge by using numerical analysis and experimental study. By doing this, the result was quite helpful to obtain the design criteria for enhancing drying efficiency, thereby achieving the optimal design of a multiple screw type dryer for treating inorganic and organic sludge wastes. One notable design feature of the dryer was to bypass a certain of fraction of the hot combustion gases into the bottom of the screw cylinder, by the fluid flow induction, across the delicately designed holes on the screw surface to agitate internally the sticky sludges. This offers many benefits not only in the enhancement of thermal efficiency even for the high viscosity material but also greater flexibility in the application of system design and operation. However, one careful precaution was made in operation in that when distributing the hot flue gas over the lump of sludge for internal agitation not to make any pore blocking and to avoid too much pressure drop caused by inertial resistance across the lump of sludge. The optimal retention time for rotating the screw at 1 rpm in order to treat 200 kg/hr of sewage sludge was determined empirically about 100 minutes. The corresponding optimal heat source was found to be 150,000 kcal/hr. A series of numerical calculation is performed to resolve flow characteristics in order to assist in the system design as function of important system and operational variables. The numerical calculation is successfully evaluated against experimental temperature profile and flow field characteristics. In general, the calculation results are physically reasonable and consistent in parametric study. In further studies, more quantitative data analyses such as pressure drop across the type and loading of drying sludge will be made for the system evaluation in experiment and calculation.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.10 no.1
• /
• pp.64-75
• /
• 1999

Objective：The purpose of this study was to investigate the prevalence and characteristics of comorbid disorders and associated symptoms in pervasive developmental disorder(PDD) and to examine the correlation between associated symptoms and developmental characteristics in PDD children. Method：The sample consisted of 209 cases of PDD and 143 cases of developmental language disorder(DLD)(control group) who were treated at the Seoul National Mental Hospital from Jan. 1996 to Mar. 1999. The diagnostic work based on DSM-IV criteria was performed by one or two child psychiatrists, while the clinical feature was evaluated by doctors’s notes, occupational/speech therapy reports, and results of social maturity scale(SMS), childhood autism rating scale(CARS), and psycho-educational profile(PEP). Two groups were compared on a wide range of measures including comorbid disorders, associated symptoms, treatment drugs, and PEP. The relation between associated symptom & PEP was investigated in total(106 cases) and in each dignostic group. Sixty-four cases of PDD were divided into three groups by CARS and then compared on associated symptoms. Result：The prevalence of comorbid disorder was 19.6% in PDD, 41.2% in DLD. The rate of manifestation of 13 associated symptoms was 31.47% in PDD, 22.13% in DLD on the average. Associated symptoms significantly high in PDD were preoccupation, obsession, self-mutilation, stereotypy, sleep problems, and odd response. In total patient group, associated symptoms that significantly influenced PEP were preoccupation, self-stimulation, stereotypy, inappropriate affect, sleep problems, and odd response. But, in each diagnostic group, no associated symptom influenced PEP. Associated symptoms significantly different between the 3 groups of CARS were stereotypy, anxiety, and sleep problems. Conclusion：These preliminary results suggest that developmental characteristics may influence associated symptoms in PDD children and a realistic approach considering minute diagnosis by associated symptoms and comorbid disorders is required.

• Journal of the Korean earth science society
• /
• v.28 no.2
• /
• pp.187-201
• /
• 2007

The first magnetotelluric (MT) transect across the Korean Peninsula was obtained traversing from the East Sea shoreline to the Yellow Sea shoreline. The MT survey profile was designed perpendicular to the strike of the principal geologic structure of the Korean Peninsula $(N30^{\circ}E)$, so-called 'China direction'. MT data were achieved at 50 sites with spacings of $3{\sim}8km$ along the 240 km survey line. The impedance responses are divided into four subsets reflecting typical geological units: the Kyonggi Massif, the Okchon Belt, the western part of the Kyongsang Basin, and the eastern part of the Kyongsang Basin. In the western part of the Kyongsang Basin, the thickness of the sedimentary layer is estimated to be about 3 km to 8 km and its resistivity is a few hundred ohm-m. A highly conductive layer with a resistivity of 1 to 30 ohm-m was detected beneath the sedimentary layer. The MT data at the Okchon Belt show peculiar responses with phase exceeding $90^{\circ}$. This feature may be explained by an electrically anisotropic structure which is composed of a narrow anisotropic block and an anisotropic layer. The Kyonggi Massif and the eastern part of Kyongsang Basin play a role of window to the deep geoelectrical structure because of the very high resistivity of upper crust. The second layers with highest resistivities in 1-D conductivity models occupy the upper crust with thicknesses of 13 km in the Kyonggi Massif and 18 km in the eastern Kyongsang Basin, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.5
• /
• pp.603-613
• /
• 1996

Hydrographic conditions (temperature, salinity, dissolved oxygen), nutrients, chlorophyll-a and suspended solid have been studied in the southwestern coastal area of Cheju Island from April 1993 to March 1994. Vertical profile of temperature, salinity and chemical properties (nutrients, chlorophyll-a) distribution in th southwestern sea of Cheju Island showed a upwelling feature. Although it was not clear in winter season, it seems to continued through out the year. In the surface water at the upwelling areas, the ranges of dissolved oxygen, nitrate, phosphate and silicate was $3.30\~8.43\;ml/l,\;0\~7.12{\mu}g/l,\;0.03\~1.75{\mu}g-at/l\;and\;2.75\~22.32\;{\mu}g-at/l$l, respectively. Nutrients was higher in the shore water than in the offshore water, because sufficient supply of nutrients from the bottom water by coastal upwelling. In November, especially high concentration silicate was observed at all the stations and depth in the study area. At all station of bottom water (down to the depth of 60 meter), concentration value of dissolved of gen was as high as 8 ml/l. Mean values of N/P was 8.0, lower than Redifield ratio of 16. The mean values of Si/P was observed to 46.3 in southwest of Cheju Island. Concentration of chlorophyll-a was in the range of $0.04\~2.36\;{\mu}g/l$. Concentration of chlorophyll-a in surface orator at all station was especially higher in spring than in other seasons. Mean concentration value of suspended solids was 3.14 mg/l $(0.75\~8.47\;mg/l)$. Ratio of the volatile suspended solids to the suspended solids was higher in the inshore water $(53\%)$ than in the offshore water $(46\%)$, and higher in the surface water than in the bottom water.