• Korean Journal of Poultry Science
• /
• v.40 no.3
• /
• pp.263-270
• /
• 2013

The vent sexing and the auto-sexing by using sex-linked traits are general sexing methods of day-old chicks. Currently, the feather sexing which is based on the differences in the feather characteristics at hatching is the representative sexing method of chicken, because the late-feathering is sex-linked trait. The feather sexing can be used if the breed has dominant feathering gene (K) in maternal and recessive gene ($k^+$) in paternal. Therefore it is necessary to identify the association of feathering genes and quantitative traits in chickens. In this study, we investigated the influence of the rate of feathering on productive traits in Korean Native Chicken. In results, there was no significant difference between early-feathering chickens and late-feathering chickens in reproductive performance such as fertility and hatchability. Livability, body weights, egg production, egg weight and egg quality also did not significantly differ between early- and late-feathering chickens. Age at first egg was the only trait of those tested in which significant difference was observed. The early-feathering chickens laid eggs 3 days earlier than late-feathering chicken. As a result, there is no influence of feathering phenotypes on productive performance in Korean Native Chickens. Consequentially, establishing the feather sexing strain is available using the Korean Native Chicken breed without considering of the effect of feathering genes on productive traits.

• Journal of Aerospace System Engineering
• /
• v.8 no.2
• /
• pp.33-39
• /
• 2014

Feathering spindle is one of the critical parts of the rotor system in the Smart Unmanned Aerial Vehicle(SUAV) that it was manufactured with special material, Maraging C300. During the initial ground and tie-down flight tests of the SUAV, surface of the feathering spindle contacting to the needle-roller bearings showed excessive wear and dent due to high vibrating loads transferred from the rotating blades. Gas nitriding process was applied to the bearing contact surface of the feathering spindle to increase surface hardness so as to improve the surface defects. This paper briefly presents the gas nitriding process adopted and the spindle quality improvements including wear and corrosion resistance.

• Korean Journal of Poultry Science
• /
• v.48 no.4
• /
• pp.177-184
• /
• 2021

Sex identification in day-old chicks is essential in the poultry industry. Currently, the feather-sexing using a sex-linked inheritance is a chick sexing method used extensively in the poultry industry. For chicks produced by feather-sexing, all females are early-feathering (EF) chicks and all males are late-feathering (LF) chicks. Therefore, investigating the effects of EF and LF phenotypes on production traits of chickens is critical. The purpose of this study was to analyze and compare the production performance between EF and LF chickens in Korean native commercial chickens. The results showed that the survival rate of the EF chickens was significantly higher than that of the LF chickens, from hatching to 12 weeks of age (P<0.05), with the highest difference observed in females. However, no significant difference was observed in body weight between the EF and LF chickens at almost all ages. In addition, no significant difference was observed between in feed utility, such as average daily feed intake and feed conversion ratio, between the EF and LF groups. In conclusion, although the survival rate of early-feathering chickens was superior to that of late-feathering chickens, no significant difference was observed in growth performance and feed utility among Korean native chickens. The results suggest that production capacity is not influenced by feathering type in the establishment of a breeder structure and production system for feather-sexing Korean native chickens, which is valuable for the practical application of feather-sexing in the poultry industry.

• Journal of Animal Science and Technology
• /
• v.54 no.4
• /
• pp.267-274
• /
• 2012

The method of sexing based on differences in the rate of feather growth provides a convenient and inexpensive approach. The locus of feather development gene (K) is located on the Z chromosome and can be utilized to produce phenotypes that distinguish between the sexes of chicks at hatching. To establish the auto-sexing native chicken strains, this study analyzed the genotype frequency of the feathering in domestic chicken breeds. The method of classification of slow- and rapid-feathering chickens was also investigated. In the slow-feathering chicks, the coverts were either the same length or longer than the primary wing feathers at hatching. However, the rapid-feathering chicks had the primary wing feathers that were longer than the coverts. The growth pattern of tail feather also distinctively differed between the rapid- and slow-feathering chicks after 5-days. The accuracy of wing feather sexing was about 98% compared with tail sexing. In domestic chicken breeds, Korean Black Cornish, Korean Rhode Island Red, and Korean Native Chicken-Red had both dominant (K) and recessive ($k^+$) feathering genes. The other breeds of chickens, Korean Brown Cornish, Ogol, White Leghorn, Korean Native Chicken-Yellow, -Gray, -White and -Black had only the recessive feathering gene ($k^+$). Consequently, feather sexing is available using the domestic chicken breeds. Establishing the maternal stock with dominant gene (K-) and paternal stock with recessive gene ($k^+k^+$), the slow-feathering characteristic is passed from mothers to their sons, and the rapid-feathering characteristic is inherited by daughters from their fathers.

• Korean Journal of Veterinary Service
• /
• v.17 no.2
• /
• pp.122-129
• /
• 1994

Teratogenic effects of diazinon were assessed morphologically and cholinergic blocking agents. Diazinon at doses ranging from 25 to 2000 ug /egg, was Injected on day 3 of incubation. TD50s were different for the various teratogenic signs (wry neck, micromelia, abnormal feathering, abnormal beak and curled claws). The threshould dose for wry neck was higher than threshould dose for other signs； 40 ug/egg produced substantial micromelia, abnormal feathering. abnormal beak and curled claws, but gave no signs of wry neck. In contrast to the teratogenic doses, the LD50 of diazinon was very high (above 2000 ug /egg). One of the characteristics of diazinon-induced teratogenesis was reduced body weight (78.7％) and body length (73.8%). Maximal teratogenic effects, scored as signs of retarded growth, wry neck micromelia, abnormal feathering, abnormal beak, and curled claws, were produced when the insectcide was administered on the third or fourth day. The threshold dose for type II teratogenic signs(such as wry neck and short neck) was higher than for type I (such as micromelia and abnormal feathering). Morphological studies, using atropine and gallamine, suggested that nicotine but not muscarinic receptors may be involved in the mechanism of diazinon induced type II malformations.

• Progress in Medical Physics
• /
• v.24 no.4
• /
• pp.230-236
• /
• 2013

Our purpose is to present a novel technique for delivering craniospinal irradiation in the supine position using a perfect match, field-in-field (FIF) intrafractional feathering, and simple forward-optimization technique. To achieve this purpose, computed tomography simulation was performed with patients in the supine position. Half-beam, blocked, opposed, lateral, cranial fields with a collimator rotation were matched to the divergence of the superior border of an upper-spinal field. Fixed field parameters were used, and the isocenter of the upper-spinal field was placed at the same source-to-axis distance (SAD), 20 cm inferior to the cranial isocenter. For a lower-spinal field, the isocenter was placed 40 cm inferior to the cranial isocenter at a constant SAD. Both gantry and couch rotations for the lower-spinal field were used to achieve perfect divergence match with the inferior border of the upper-spinal field. A FIF technique was used to feather the craniospinal and spinal-spinal junction daily by varying the match line over 2 cm. The dose throughout the target volume was modulated using the FIF simple forward optimization technique to obtain homogenous coverage. Daily, image-guided therapy was used to assure and verify the setup. This supine-position, perfect match craniospinal irradiation technique with FIF intrafractional feathering and dose modulation provides a simple and safe way to deliver treatment while minimizing dose inhomogeneity.

• Korean Journal of Veterinary Research
• /
• v.34 no.1
• /
• pp.49-54
• /
• 1994

Teratogenic effects of diazinon were assessed on morphology of chick embryos cholinergic blocking agents. Diazinon at doses ranging from 25 to $2000{\mu}g/egg$, was injected on Day 3 of incubation. $TD_{50S}$, were different for the various teratogenic sings such as wry neck, micromelia, abnormal feathering, abnormal beak and curled claws. The threshold dose for wry neck was higher than the threshold dose for other signs; $40{\mu}g/egg$ produced substantial micromelia, abnormal feathering, abnormal beak and curled claws, but gave no sings of wry neck. In contrast to the teratogenic doses, the $LD_{50}$ of diazinon was very high(above $2000{\mu}g/egg$). One of the characteristics of diazinon-induced teratogenesis was reduction of body weight(78.8%) and body length(73.8%). Maximal teratogenic effects, scored as sings of retarded growth, wry neck, micromelia, abnormal feathering, abnormal beak, and curled claws, were produced when the insectcide was administered on the third or fourth day. The threshold dose for type II teratogenic sings including wry neck and short neck was higher than for type I including micromelia and abnormal feathering. Morphorlogical studies, using atropine and gallamine, suggested that nicotinc but not muscarinic receptors may be involved in the mechanism of diazinon-induced type II malformations.

• Horticultural Science & Technology
• /
• v.19 no.1
• /
• pp.39-42
• /
• 2001

C6-Benzylamino purine (BAP) 400 ppm with 500 ppm Spreader, 500 ppm Cover, 250 ppm Spreadersticker, 350 ppm Siloxane, or 1% Tween 20 was sprayed and the effect of surface-active agents on the feathering of maiden apple trees was evaluated. Only Tween 20 showed additional effect on the feathering in comparison with the single BAP treatment. In the second year different concentrations of Tween 20 were added to 400 ppm BAP. Each BAP treatment added with 0.2, 0.5, 0.8, or 1.0% Tween 20 was more effective in feathering than BAP 400ppm alone, but no significant differences among the concentrations.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.12
• /
• pp.48-53
• /
• 2005

In this paper, we present our recent progress in the LIPCA (Lightweight Piezo-Composite Actuator) application for actuation of a flapping wing device. The flapping device uses linkage system that can amplify the actuation displacement of LIPCA. The feathering mechanism is also designed and implemented such that the wing can rotate during flapping. The natural flapping-frequency of the device was about 9 Hz, where the maximum flapping angle was achieved. The flapping test under 4 Hz to 15 Hz flapping frequency was performed to investigate the flapping performance by measuring the produced lift and thrust. Maximum lift and thrust were produced when the flapping device was actuated at about the natural flapping-frequency.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.6
• /
• pp.1-7
• /
• 2006

This paper presents the study in the development of optimal working method for an outer-hull preprocessing robot using a quaternion. The out-hull preprocessing robot consists of feathering and cleaning parts. This robot should be controlled correctly for feathering work because it is to be worked on a curved plate that can result in the errors of orientation. In this paper, we propose a control algorithm between given two orientations of the out-hull preprocessing robot by using a quaternion with spherical linear interpolation. The proposed control algorithm is shown to be effective in terms of motor angles and torques when compared to a conventional Euler angle interpolation, by using both $MATLAB^{\circledR}$ and $VisualNastran4D^{\circledR}$.