• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권10호
• /
• pp.5144-5160
• /
• 2019

Secret sharing is an effective way of protecting secret messages. However, the traditional secret sharing schemes are considered meaningless due to malicious people attention which might raise risks. To overcome the weakness, this paper presents an effective secret sharing scheme with the functionality of cheater identification, based on meaningful QR code. The secret message will be split and concealed in the padding region of cover QR codes with the assistance of Latin square and it can be completely restored when all the involved participants cooperate. The concealing strategy exploits the characteristic of Reed-Solomon (RS) code to ensure the strong robustness of generated QR code pseudo-shares. The meaningful QR code pseudo-shares help to reduce the curious of unrelated persons. Some experiments were done to evaluate the performance of proposed scheme. The results showed that the proposed scheme is feasible, efficient and secure compared to the other existing schemes. It also achieves a higher secret payload and maintains stronger robustness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.30-32
• /
• 2001

Switched reluctance motors have the advantage a high torque/weight ratio, as the large reluctance torque is made by salient poles of both start and rotor, and a high reliability. On the other hand, the switched reluctance motors have the disadvantage of a large ripple torque which is made by salient poles. So the application for the industrial fields have been limited to special cases. Geometric significant parameters are ${\beta}_r$ and ${\beta}_s$ respectively the rotor and stator pole arc while the significant electric parameters are the angles where the drive switches are turned on and off. It can be simulated that ${\beta}_r$ and ${\beta}_s$ must be chosen in a particular region of the plane (${\beta}_r,\;{\beta}_s$) called the feasible triangle. The aim of this paper is to simulate the minimum of the torque ripple by using finite element method and to determine the best choice of the rotor and stator pole arc.

• 해양환경안전학회지
• /
• 제1권2호
• /
• pp.69-82
• /
• 1995

This study is concerned with developing a heuristic algorithm for solving a class of ninlinear integer programs(NLIP). Exact algrithm for solving a NLIP either may not exist, or may take an unrealistically large amount of computing time. This study develops a new heuristic, the Excursion Algorithm(EA), for solving a class of NLIP's. It turns out that excursions over a bounded feasible and/or infeasible region is effective in alleviation the risks of being trapped at a lical optimum. The developed EA is applied to the redundancy optimization problems for improving the system safety, and is compared with other existing heuristic methods. We also include simulated annealing(SA) method in the comparision experiment due to ist populatrity for solving complex combinatorial problems. Computational results indicate that the proposed EA performs consistently better than the other in terms of solution quality, with moderate increase in computing time. Therefore, the proposed EA is believed to be an attractive alternative to other heuristic methods.

• Wind and Structures
• /
• 제15권2호
• /
• pp.111-129
• /
• 2012

Codes for structural design usually assume that the incident mean wind velocity is parallel to the ground, which constitutes a valid simplification for frequent winds caused by sypnoptic events. Wind effects due to other phenomena, such as thunderstorm downbursts, are simply neglected. In this paper, results of recent and ongoing research on this topic in Brazil are presented. The model of the three-dimensional wind velocity field originated from a downburst in a thunderstorm (TS), proposed by Ponte and Riera for engineering applications, is first described. This model allows the generation of a spatially and temporally variable velocity field, which also includes a fluctuating component of the velocity. All parameters are related to meteorological variables, which are susceptible of statistical assessment. An application of the model in the simulation of the wind climate in a region sujected to both EPS and TS winds is discussed next. It is shown that, once the relevant meteorological variables are known, the simulation of the wind excitation for purposes of design of transmission lines, long-span crossings and similar structures is feasible. Complementing the theoretical studies, wind velocity records during a recent TS event in southern Brazil are presented and preliminary conclusions on the validity of the proposed models discussed.

• Journal of Welding and Joining
• /
• 제20권3호
• /
• pp.67-73
• /
• 2002

In an attempt to evaluate the feasibility of friction stir welding(FSW) for joining carbon steels, microstructures and mechanical properties of friction stir welded carbon steels with different grain structures were investigated. In comparison of O-type stir zone(SZ) appeared in various aluminium alloys, configuration of SZ in friction stir welded carbon steels displayed U-type. Plastically deformed pearlite band structure was identified to surround the SZ, indicating the existence of so-called thermo-mechanically affected zone(TMAZ). However, the TMAZ of carbon steels was much narrower than that of Al alloys. The microstructures of both stir zone and TMAZ revealed bainite matrix in a conventional carbon steel for shipbuilding, while, in the same region, ferrite matrix microstructures were formed in a low carbon fine grained steel. The conventional carbon steel showed superior stirring workability to that of the fine grained carbon steel. The yield and tensile strength of the friction stir welded joints were comparable to those of the base metals, and the elongation in welded joints demonstrated excellent ductility. Absorbed energy in SZ of the fine grained carbon steel was ten times higher than that obtained from conventional submerged arc weld metal of the same steel. Based on these results, the application FSW to carbon steels was found to be feasible.

• International Journal of Aerospace System Engineering
• /
• 제2권2호
• /
• pp.6-9
• /
• 2015

A new cross disciplinary conception of transitional aero-optics is built up during analyzing and measuring the linkage between the hypersonic boundary layer transition on a flat plate and the jittering characteristics of the small-aperture beam through that boundary layer. Based on that conception, the Small-Aperture Beam Technique (SABT) and high-speed Imaging Camera System (ICS) used in aero-optical studies are considered as new techniques for the assessment of the hypersonic transition in the boundary layer on a flat plate. In the FD-20 gun tunnel, for the free stream parameters with Mach number of 8 and unit Reynolds number of $1{\times}10^7$ (1/m), those two optical techniques are used to measure the jitter of the small-aperture beam. At the same free stream parameters, the distribution of the heat transfer along the centerline of the flat plate is also measured by the thin film resistance gauge technique. The results show the similarity of the increase trend between the heat transfer and the jitter of the small-aperture beam in the transitional region. It helps us to surmise that it may be feasible to diagnose the transition in a hypersonic boundary layer on a flat plate by means of those above optical techniques.

• 정보처리학회논문지B
• /
• 제9B권5호
• /
• pp.523-532
• /
• 2002

최근 들어 인터넷이 광범위하게 보급되고 무선 이동통신 기술이 눈부시게 발전하면서 무선 단말기를 통한 인터넷 상에서의 정보 검색이 시간과 장소에 구애받지 않고 가능하게 되었다. 하지만 무선 단말기를 통한 인터넷의 접근은 단말기 자체의 제한과 무선망의 제한으로 인해 기존 데스크 탑 컴퓨터의 유선 상에서 보다 웹 페이지 탐색에 많은 어려움을 가진다. 본 논문은 이러한 제약을 완화시키기 위해서 웹 페이지로부터 페이지 정보를 축소한 페이지 맵을 생성하여 웹 정보를 쉽게 검색할 수 있게 하는 페이지 재구성 시스템을 제안한다. 그리고 대표적인 웹 사이트에 대한 실험을 통해 제안한 시스템이 무선 단말기 상에서 빠른 웹 페이지 로딩 속도를 보장하며, 작은 스크린을 통해서도 효율적인 웹 탐색이 가능함을 보인다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권9호
• /
• pp.3286-3301
• /
• 2014

Jung and Yoo proposed the first image interpolation-based reversible data hiding algorithm. Although their algorithm achieved superior interpolation results, the embedding capacity was insufficient. Lee and Huang proposed an improved algorithm to enhance the embedding capacity and the interpolation results. However, these algorithms present limitations to magnify the original image to any resolution and pixels in the boundary region of the magnified image are poorly manipulated. Furthermore, the capacity and the image quality can be improved further. This study modifies the pixel mapping scheme and adopts a bilinear interpolation to solve boundary artifacts. The modified reference pixel determination and an optimal pixel adjustment process can effectively enhance the embedding capacity and the image quality. The experimental results show our proposed algorithm achieves a higher embedding capacity under acceptable visual distortions, and can be applied to a magnified image at any resolution. Our proposed technique is feasible in reversible data hiding.

• 정보과학회지
• /
• 제1권1호
• /
• pp.72-74
• /
• 1983

Traditionally, polynomials have been used to approximte functions with prescribed values at a number of points(called the knots) on a given interal on the real line. The method of splines recently developed is more flexible. It approximates a function in a piece-wise fashion, by means of a different polynomial in each subinterval. The cubic spline gas ets origins in beam theory. It possessed continuous first and second deriatives at the knots and is characterised by a minimum curvature property which es rdlated to the physical feature of minimum potential energy of the supported beam. Translated into mathematical terms, this means that between successive knots the approximation yields a third-order polynomial sith its first derivatives continuous at the knots. The minimum curvature property holds good for each subinterval as well as for the whole region of approximation This means that the integral of the square of the second derivative over the entire interval, and also over each subinterval, es to be minimized. Thus, the task of determining the spline lffers itself as a textbook problem in discrete computer programming, since the integral of ghe square of the second derivative can be obviously recognized as the criterion function whicg gas to be minimized. Starting with the initial value of the function and assuming an initial solpe of the curve, the minimum norm property of the curvature makes sequential decision of the slope at successive knots (points) feasible. It is the aim of this paper to derive the cubic spline by the methods of computer programming and show that the results which is computed the all the alues in each subinterval of the spline approximations.

• Structural Engineering and Mechanics
• /
• 제29권3호
• /
• pp.311-325
• /
• 2008

Noting that damage occurrence of offshore jacket platforms is concentrated in two structural regions that are in the vicinity of still water surface and close to the seabed, a damage detection method by using only partial measurement of vibration in a suspect region was presented in this paper, which can not only locate damaged members but also evaluate damage severities. Then employing an experiment platform model under white-noise ground excitation by shaking table and using modal parameters of the first three modes identified by a scalar-type ARMA method on undamaged and damaged structures, the feasibility of the damage detection method was discussed. Modal parameters from eigenvalue analysis on the structural FEM model were also used to help the discussions. It is demonstrated that the damage detection algorithm is feasible on damage location and severity evaluation for broken slanted braces and it is robust against the errors of baseline FEM model to real structure when the principal errors is formed by difference of modal frequencies. It is also found that Z-value changes of modal shapes also play a role in the precise detection of damage.