• 환경영향평가
• /
• 제9권1호
• /
• pp.1-11
• /
• 2000

An environmental geochemical survey of heavy metal distribution in marine surface sediments around the ocean of Samcheonpo coal-fired power plant was conducted to investigate the possibility of coal-ash leakage from ash pond and the associated heavy metal pollution in sedimental deposits due to the operation of the coal-fired power plant. The X-Ray Diffractometry (XRD) analysis showed that the main leakage point of coal-ash was limited to a single site of the first ash pond. It also appeared that the amounts of organic carbon and metal elements were positively correlated to the grain size distribution, and that Co, Cr, Cu, Fe, Ni, and Zn were bounded to organic ligands. However, the distributions of Cd, Hg, and Mn did not have any significant correlation with the sediment grain size and organic matters. In particular, the distribution of Cd appeared to be affected by the concentration of the carbonate materials in the study area.

• 자원환경지질
• /
• 제31권3호
• /
• pp.223-233
• /
• 1998

The environments in the vicinity of the Dalseong mine has been much contaminated by heavy metals related to CuW ore deposit, which is of hydrothermal pipe type mineralized by quartz monzonite in the andesitic rocks. Chalcopyrite and wolframite are major ore minerals and sphalerite, galena and others are associated. To investigate the contamination of heavy metals in plants, samples of plants and soils were analysed by ICP for Fe, Mn, Cu, Pb, Zn, Ni, Co, Cd and Cr. Most of ore-related heavy metals are anomalously high in plants and soils, which were contaminated by the development of Taehan Tungsten Mining Company. The mine produced 48,704 tons (M/T) of 4 wt.% Cu and 1,620 tons (S/T) of 70 wt.% of $WO_3$ during active mining activity from 1961 to 1971 but was closed in 1975. Wild plants growing at the mine area may be used to remove heavy metals form soils, which cause contaminations of plants, stream waters and groundwaters in the vicinity of the mine.

• 한국재료학회지
• /
• 제29권3호
• /
• pp.160-166
• /
• 2019

This study investigates the effect of thermo-mechanical treatment on the damping capacity of the Fe-20Mn-12Cr-3Ni-3Si alloy with deformation induced martensite transformation. Dislocation, ${\alpha}^{\prime}$ and ${\varepsilon}-martensite$ are formed, and the grain size is refined by deformation and thermo-mechanical treatment. With an increasing number cycles in the thermo-mechanical treatment, the volume fraction of ${\varepsilon}-martensite$ increases and then decreases, whereas dislocation and ${\alpha}^{\prime}-martensite$ increases, and the grain size is refined. In thermo-mechanical treated specimens with five cycles, more than 10 % of the volume fraction of ${\varepsilon}-martensite$ and less than 3 % of the volume fraction of ${\alpha}^{\prime}-martensite$ are attained. Damping capacity decreases by thermo-mechanical treatment and with an increasing number of cycles of thermo-mechanical treatment, and this result shows an opposite tendency for general metal with deformation induced martensite transformation. The damping capacity of the thermo-mechanical treated damping alloy with deformation induced martensite transformation greatly affect the formation of dislocation, grain refining and ${\alpha}^{\prime}-martensite$ and then ${\varepsilon}-martensite$ formation by thermo-mechanical treatment.

• 한국해양학회지
• /
• 제22권3호
• /
• pp.130-142
• /
• 1987

제주남방해역 표층퇴적물에 대해 입도분석, 경광물 및 점토광물, 그리고 미량원소 분석을 실시하였다. 본 연구해역의 퇴적물상은 남동부의 오조립질 분포역 과 남서부 조`세립질 분포지로 구분되며, 남서쪽 끝지역에는 소규모의 현생니질퇴적 물 분포대(mud zone)도 존재한다. 본 역에 분포하는 퇴적물은 분급이 불량하고 negative~positive skewed할뿐 아니라 platykurtic~leptokurtic한 특성을 나타냈으며, 조립질은 도약(saltation)에 의해, 세립질은 도약 및 부유(suspension)에 의해 운반된 것으로 보여 진다. 측정된 13종의 지화학적원소성분중 Co, Ni, Ca, Ag를 제외한 9 종은 남동부지역에서 남서부지역으로 향함에 따라 함량이 증가하는 경향을 보였고, Co와 Ni은 동`서부간에 유사한 함량분포를 나타냈으나 Ca와 Ag은 남동부지역에서 함량치가 높았다. 탄산염함량은 남동부의 조립질 분포역에서가 남서부보다 높게나 타난 반면 총 유기물함량은 이와는 상반된 경향을 보였다. 경광물은 석영, 암편, K- 장석, Na-Ca장석 순의 조성을 보였는데 제주도 주변 해역에서 외해쪽으로 향함에 따라 석영과 K-장석의 함량증가하고 Na-Ca장석과 암편은 감소하는 경향을 나타냈 다. 조사지역 남서쪽 끝 mud 지역의 점토광물로는 illite, chlorite, kaolinite, feldspar, calcite등인데, chlorite가 양적으로 많고 calcite peak가 현저하게 나타날 뿐만 아니라 Ca, Pb, Ni등의 지화학적원소성분의 함량도 황하기원퇴적물의 특성치 와 유사하여 이 지역세립질퇴적물 대부분은 황하기원인 것으로 사료된다.

• 한국산업보건학회지
• /
• 제25권3호
• /
• pp.380-391
• /
• 2015

Objectives: The objective of this study is to assess airborne particulate matter pollution and its effect on health of residents living near Ansim Briquette Fuel Complex and its vicinities. Also, this study measured and analyzed the concentration of TSP, $PM_{10}$, $PM_{2.5}$, and heavy metals which influences on the environmental and respiratory disease in Ansim Briquette Fuel Complex, Daegu, Korea. Methods: In this study, we analyzed various environmental pollutants such as particulate matter and heavy metals from Ansim Briquette Fuel Complex that adversely affected local residents's health. In particular, we verified the concentration distribution and characteristics of exposure for TSP, $PM_{10}$, and $PM_{2.5}$ among particulate matters, and heavy metals(Cd, Cr, Cu, Mn, Ni, Pb, Fe, Zn, and Mg). In that regard, the official test method on air pollution in Korea for analysis of particulate matter and heavy metal in atmosphere were conducted. The large capacity air sampling method by the official test method on air pollution in Korea were applied for sampling of heavy metals in atmosphere. In addition, we evaluated the concentration of seasonal environmental pollutants for each point of residence in Ansim Briquette Fuel Complex and surrounding area. The sampling measured periods for air pollutants were from August 11, 2013 to February 21, 2014. Furthermore, we measured and analyzed the seasonal concentrations(summer, autumn and winter). Results: The average concentration for TSP, $PM_{10}$, and $PM_{2.5}$ by direct influence area at Ansim Briquette Fuel Complex were 1.7, 1.4 and 1.9 times higher than reference region. In analysis results of seasonal concentrations for particulate matter in four direct influence and reference area, concentration levels for winter were generally somewhat higher than concentrations for summer and autumn. The average concentrations for Cd, Cr, Mn, Ni, Pb, Fe, and Zn in direct influence area at Ansim Briquette Fuel Complex were $0.0008{\pm}0.0004{\mu}g/Sm^3$, $0.0141{\pm}0.0163{\mu}g/Sm^3$, $0.0248{\pm}0.0059{\mu}g/Sm^3$, $0.0026{\pm}0.0011{\mu}g/Sm^3$, $0.0272{\pm}0.0084{\mu}g/Sm^3$, $0.4855{\pm}0.1862{\mu}g/Sm^3$, and $0.3068{\pm}0.0631{\mu}g/Sm^3$, respectively. In particularly, the average concentrations for Cd, Cr, Mn, Ni, Pb, Fe, and Zn in direct influence area at Ansim Briquette Fuel Complex were 1.9, 3.6, 2.1, 1.9, 1.4, 2.6, and 1.2 times higher than reference area, respectively. The continuous monitoring and management were required for some heavy metals such as Cr and Ni. Moreover, the average concentration in winter for particulate matter in direct influence area at Ansim Briquette Fuel Complex were generally higher than concentrations in summer and autumn. Also, average concentrations for TSP, $PM_{10}$, and $PM_{2.5}$ were from 1.5 to 2.0 times, 1.2 to 1.8 times, and 1.1 to 2.3 times higher than reference area, respectively. In results for seasonal atmospheric environment, TSP, $PM_{10}$, $PM_{2.5}$, and heavy metal concentrations in direct influence area were higher than reference area. Especially, the concentrations in C station were a high level in comparison with other area. Conclusions: In the results, some particulate matters and heavy metals were relatively high concentration, in order to understand the environmental pollution level and health effect in surrounding area at Ansim Briquette Fuel Complex. The concentration of some heavy metals emitted from direct influence area at Ansim Briquette Fuel Complex were relatively higher than reference area. In particular, average concentration for heavy metals in this study were higher than average concentrations in air quality monitoring station for heavy metal for 7 years in Deagu metropolitan region. Especially, the residents near Ansim Briquette Fuel Complex may be exposed to the pollutants(TSP, $PM_{10}$, $PM_{2.5}$, and heavy metals, etc) emitted from the factories in Ansim Briquette Fuel Complex.

• 한국해양학회지:바다
• /
• 제2권2호
• /
• pp.125-137
• /
• 1997

심해저 퇴적물중 금속과 희토류 원소의 수직 함량변화 및 변화의 원인을 구명하기 위해 북동태평양 클라리온-클리퍼톤 균열대(Clarion-Clipperton fracture zone) 중남부에 위치한 한국심해환경연구(Korea Deep-sea Environmental Study, KODES) 지역에서 박스코어러(box corer)를 이용해 18개의 주상시료를 채취했다. KODES 지역 퇴적층은 색상변화에 따라 갈색의 Unit I, 연갈색의 Unit II, 흑(갈)색의 Unit III로 분류된다. Unit I은 Unit II에 비해 높은 Ni/Cu비를 가지고, Unit III는 Unit I, II에 비해 현저히 높은 금속함량을 보인다. Unit II는 지화학적 자료에 근거하여 상부의 Unit IIa 층과 하부의 Unit IIb 층으로 세분될 수 있는데, Unit IIb 층은 Unit IIa 층에 비해 높은 구리 및 3+REEs/NASC 비(또는 큰 음의 Ce 이상치) 등의 특징을 보인다. Unit III는 흑갈색의 상부 Unit IIIa 층과 흑색의 하부 Unit IIIb 층으로 세분되는데, Unit IIIb 층은 Unit IIIa 층에 비해 망간, 철 함량이 높다. 연구지역이 속한 태평양 지판의 확장속도와 방향 그리고 약 11-30 Ma 인 Unit III의 연령을 고려할 때 Unit IIIb 층은 동태평양 균열대(East Pacific Rise, EPR) 그리고 적도와 근접한 위치에서 퇴적된 것으로 계산된다. 흑색인 Unit IIIb 층의 높은 망간, 철 함량은 EPR에서 기원한 화산기원의 철, 망간 등을 공급받아 나타난 결과로 보인다. 한편, Unit III는 물론이고 Unit IIb 역시 적도 고생산대의 영향권에 있었고, 따라서 해수중 풍부한 유기체들과 함께 구리, 희토류 원소 등도 Unit IIb, III 층으로 많이 공급되었을 것이다. 퇴적물로 공급된 이들 구리 및 희토류 원소들은 유기물이 분해됨에 따라 스멕타이트 그리고 어류 잔해물(fish bone debris) 등에 잔류한 것으로 보인다. 즉 KODES 지역 주상 퇴적물에서 나타나는 구리 및 희토류 원소의 수직 함량변화는 연구지역이 제3기 말 시기에 적도 고생산대를 지나는 동안 많은 유기물을 공급받아서 초래된 결과로 사료된다.

• 한국대기환경학회지
• /
• 제31권3호
• /
• pp.223-238
• /
• 2015

The $PM_{2.1}$ was collected by LVCI (low volume cascade impactor) during Group-A Period (September 1990 to December 2012) and the $PM_{2.5}$ was collected by HVAS (high volume air sampler) during Group-B Period (September 2009 to April 2012) at Kyung Hee University, Global Campus located on the boarder of Yongin and Suwon. The 8 water-soluble ions ($Na^+$, $NH_4{^+}$, $K^+$, $Mg^{2+}$, $Ca^{2+}$, $Cl^-$, $ NO_3{^-}$, and $SO_4{^{2-}}$) were analyzed by IC, and the 14 inorganic elements (Al, Mn, Si, Fe, Cu, Pb, Cr, Ni, V, Cd, Ba, Zn, Ti, Ag) were analyzed by XRF and ICP-AES after performing proper pre-treatments of each sample filter. The average total mass fractions of $SO_4{^{2-}}$, $NO_3{^-}$, and $NH_4{^+}$+ to $PM_{2.5}$ samples during Group-B Period were 0.39 in normal days, 0.44 in haze days, and 0.27 in Asian dust days, respectively; however, the average total mass fractions of Al, Fe, and Si to $PM_{2.5}$ mass were 0.043 in normal days, 0.021 in haze days, and 0.036 in Asian dust days, respectively. Especially the concentration of Pb was significantly decreased during Group-B Period rather than during Group-A Period, while Cr and Ni was increased during Group-B Period. In this study, we intensively compared the annual and seasonal patterns of major chemical species among normal days, haze days, and Asian dust days. Further we developed mass fraction profiles by collecting episode cases of haze days and Asian dust days, which were consisting of 22 chemical species. Those profiles are considered to be useful when applying various receptor models and establishing air quality management plans near future.

• 열처리공학회지
• /
• 제11권2호
• /
• pp.140-149
• /
• 1998

The graphitization is affected by the addition of small amount of the elements, such as Si, Al, Ni, B, Cr and Mn etc. Boron is well known as the most effective element for the graphitization of cementite in high carbon steels. But a study on quantitative analysis of B effect on the graphitization is few reported. Therefore the effect of boron addition in Fe-0.65%C-1.0%Si-0.5%Mn steels on the graphitization is investigated quantitatively using hardness tester, optical microscope and scanning electron microscope, neutron induced microscopic radiography. The graphitization in high carbon steels is promoted with 0.003~0.005%B addition. But the graphitization in steels which has no boron takes long holding time at $680{\sim}720^{\circ}C$. The hardness of quenched steel containing 0.003%B is higher than that of 0.005%B added steel due to complete dissolution of fine graphites into the austenite. The 0.003%B added high carbon steel graphitized at $680^{\circ}C$ for 25hr is useful steel for the agricultural implements and automobile parts which needed a good formability and high hardness.

• 한국해양학회지
• /
• 제9권1_2호
• /
• pp.31-38
• /
• 1974

해저퇴적물의 물리화학적인 성질은 저서생물의 환경요인의 하나로 알려져 있다. 아울러 저서어종의 어장형성과도 밀접한 관계가 있다. 한국 근해 퇴적물의 물리적인 특성은 Zenkevitch(1963), 박과 송(1972)이 동해안의 일부에서 조사연구하였고 박과 송(1971), 권과 박(1973)이 남해안에서의 해저퇴적물 입도분석을 발표한 바 있다. 한국 연안해역 해저퇴적물의 지화학적인 특성은 Nino et al(1969)이 동해 저질중의 유기태탄소의 함량 Ishibashi and Ueda(1955, 1993)의 화학적 특성, 그리고 최(1971) 에 의한 동해 해저퇴적물의 지화학적 성분의 함량과 분포에 관한 발표가 주를 이루고 있다. 행암만과 가덕도 일원에 걸쳐 조사한 결과에 의하면 행암만내의 조석현상등에 의한 해수의 유동은 만의 동단으로 향하는 것으로 나타났다.(강, 1972, 수산진흥원, 1972). 따라서 본 연구의 목적은 육상 토사와 이에 따른 각종 중금속류의 연안유입 및 각종 산업활동에 기인하는 여러 가지 중금속류의 해수내 유입여하에 따른 침전현상과 이동범위를 조사 연구하는데 있었다.

• 자원리싸이클링
• /
• 제24권3호
• /
• pp.27-33
• /
• 2015

제강분진(Electric Arc Furnace Dusts)은 유해폐기물로 지정되어있는 유해한 환경오염물질이다. 이 분진은 철강산업의 부산물로써 철, 아연, 니켈, 구리 등 많은 유가금속을 포함하고 있어 적절한 처리를 거치면 폐기물이 아닌 자원으로 재활용이 가능하다. 본 연구에서는 국내 전기로에서 발생하는 제강분진을 대상으로 가장 높은 함유량을 가진 아연의 회수를 위한 최적조건을 도출하기 위해 습식침출법을 적용하였다. 분진과 황산의 고액비, 침출시간, $MnO_2$ 투입량 등의 조건을 종합하여 실험을 진행하여 최적 아연회수조건을 도출하였다. 황산농도 3 M, 고액비 1:2, 철 제거를 위한 폭기 1.8 L/min 강도로 2시간에서 95%의 아연 회수율이 관찰되었다. 그러나, 현장 적용의 현실성을 고려한 다른 최적의 조건은 저농도 황산과 $MnO_2$ 3.5 g을 투입했을 경우 약 80 %의 아연 회수율을 나타내었다.