Journal of the Korean Society of Food Science and Nutrition
/
v.43
no.7
/
pp.1048-1054
/
2014
The purpose of this study was carried out to investigate the cause of sulfur dioxide occurrence, general element composition, sulfur compounds, heavy metals, macro- & micro-minerals, and oxidation-reduction potential (ORP) following baking time course of RS (RS1, RS2, RS3, and RS4) and mudflat solar salts (MSS). Sulfur dioxide ($SO_2$) and sulfite ($SO{_3}^{2-}$) were not detected in MSS or RS. However, sulfate ($SO{_4}^{2-}$) content significantly decreased in RS (29,878.15~36,097.45 ppm) compared to that in MSS (35,601.65 ppm). ORP was 181.15 mV in MSS, and 58.55 mV in RS1. Moisture content was 9.34% in MSS and 0.00% in RS with increased NaCl (94.77~95.77%). Moisture and NaCl contents showed no significant difference in RS. Insoluble and sandy residues were higher in RS than in MSS, whereas Ca and K showed no significant difference. Mg and Cl contents were higher in RS than in MSS. Br level was higher in MSS (628.1 ppm) than in RS (512.72~586.62 ppm), but there was no significant difference in $NO_3$. Heavy metals (Pb, As, and Hg) were more abundant in RS than in MSS, but levels were still safe. These results suggest that MSS and RS may increase protection against from $SO_2$ and $SO{_3}^{2-}$.
Statement of problem: Titanium nitride(TiN) coatings are the most general and popular coating method and used to improve the properties of metallic surface for industrial purposes. When TiN coating applied to the abutment screw, frictional resistance would be reduced, as a results, the greater preload and prevention of the screw loosening could be expected. Purpose: The purpose of this study was to investigate mechanical properties of TiN coated film of various coating thickness on the titanium alloy surface and to evaluate proper coating thickness. Material and method: 95 Titanium alloy (Ti-6Al-4V) discs of 15 mm in diameter and 3 mm in thickness were prepared for TiN coating and divided into 7 groups in this study. Acceding to coating deposition time (CDT) with TiN by using Arc ion plating, were divided into 7 groups : Group A (CDT 30min), Group B (CDT 60min), Group C (CDT 90min), Group D (CDT 120min), Group E (CDT 150min), Group F(CDT 180min) and Group G (no CDT) as a control group. TiN coating surface was observed with Atomic Force Microscope(AFM), field emission scanning electron microscopy(FE-SEM) and examined with scratch tester, wear tester. Result: 1. Coating thickness fir each coated group was increased in proportion to coating deposition time. 2. Surface of all coated groups except Group A was homogeneous and smooth. However, surface of none coated Group G had scratch. 3. Adhesion strength for each coated group was increased in proportion to coating deposition time. 4. Wear resistance for each coated group was increased in proportion to coating deposition time. 5. Surface roughness in Group A, B, C was increased in proportion to coating deposition time. But, surface roughness in Group D, E, F was showed decreased tendency in proportion to coating deposition time. Conclusion: According to coating deposition time, mechanical properties of TiN coated film were changed. It was considered that 120 minutes coating deposition time ($1.32{\mu}m$ in coating thickness) is necessary.
Kim, Soo-Jeong;Moon, Young-Sun;Kim, Mi-Ra;Kim, Yoo-Jeong;Nam, Ki-Chun
Annual Conference on Human and Language Technology
/
1999.10e
/
pp.441-446
/
1999
본 연구는 접속사를 통한 텍스트 통합 과정이 논리적 추론 종류에 따라 다른 정보처리 과정 혹은 다른 종류의 단원적 구조(modular structure in language processing)에 의해 처리되는지를 조사하기 위해 실시되었다. 또한, 접속사를 통한 추론 과정이 실어증의 증상 종류에 따라 다른 종류의 언어정보처리 손상이 있는지를 평가하기 위해 실시되었다. 실험에 참가한 환자는 이해성 실어증환자(Wernicke aphasic), 전반성 실어증 환자(Global aphasic), 표현성 실어증 환자(Broca aphasic) 등이었다. en 종류의 과제를 이용하였다. 한 과제는 앞 뒤 문장을 논리적 관계성을 표현하는 접속사를 채워 넣는 과제였고 다른 과제는 접속사가 포함된 텍스트가 옳은지를 판단하는 정오 판단 과제였다. 실험재료 문장에 사용된 접속사는 추가적인 정보를 제공하는 '그리고'와 대등 관계를 나타내는 '그러나' 및 인과 관계를 표현하는 '그래서' 였다. 이 세 종류의 접속사는 각기 다른 논리적 관계성을 나타낸다. 실험 결과는 실어증 환자가 전반적으로 채워 넣기 과제에서 보다는 정오 판단 과제에서 더 많은 실수를 보였으며, 표현성 실어증 환자보다는 이해성 실어증 환자가 더 많은 오류를 보였다. 또한, 세 종류의 접속사 중에 '그리고'가 표함된 텍스트에서 더 많은 실수를 보였다. 이 연구에서 나타난 흥미 있는 결과는 표현성 실어증 환자는 '그러나' 접속사가 포함된 텍스트에서의 수행이 '그래서'가 포함된 경우에서보다 좋은 반면에 전반성 실어증 환자는 '그래서'를 포함하는 텍스트에서의 수행이 '그러나'를 포함하는 텍스트에서의 수행이 더 우수해서 이중해리(double dissociation)가 나타난다는 사실이다. 이 결과는 선후 문장이 어떤 종류의 논리적 관계성을 지니는가에 따라 다른 종류의 정보처리가 진행된다는 것을 암시하는 결과이다.>$\textrm{cm}^2$.。C로 비교적 양호한 초전박막의 전기적 특성을 나타내었다.(Mg+Fe)비를 갖고 전자에 비해 Al이 풍부한 환경에서 생성되었으며, 따라서 활석과 연관되지 않은 녹니석은 생성시 광체와 인접한 화강아질 편마암에 의해 주로영향을 받았을 것으로 생각된다. 녹니석의 이러한 2가지 화학조성상의 경향은 녹니석과 공존하는 운모류나 각섬석류들의 화학분석결과와도 잘 일치한다. 이러한 결과는 이 지역의 활석 광상이 초염기성암 기원의 사문암이 열수변질작용을 받아 생성되었음을 명확하게 지시하며, 따라서 활석 광석내에 존재하는 녹니석은 활석의 근원 광물로서 녹니석편암 및 녹니석 편마암 매의 녹니석이 활석화되고 남은 잔존광물이 아니라, 주변암에 의해 성분상의 영향을 받은 열수와 사문암과의 변질교대작용에 의한 활석화과정 중에 주로 생성된 것으로 추정된다. 이러한 결과는 연구지역의 활석광상이 초염기성암의 사문암화 작용과 활석화 작용의 두 가지 변질작용에 의해 형성되어졌음을 알려준다.농도 증가 없이 폐 조직에 약 50배 정도의 고농도 cisplatin을 투여할 수 있었으며, 또한 분리 폐 관류 시 cisplatin에 의한 직접적 폐 독성은 발견되지 않았다이 낮았으나 통계학적 의의는 없었다[10.0%(4/40) : 8.2%(20/244), p>0.05]. 결론: 비디오흉강경술에서 재발을 낮추기 위해 수술시 폐야 전체를 관찰하여 존재하는 폐기포를 놓치지 않는 것이 중요하며, 폐기포를 확인하지 못한 경우와 이차성 자연기흉에 대해서는 흉막유착술에 더 세심한 주의가 필요하다는 것을 확인하였다. 비디오흉강경수술은 통증이 적고, 입원기간이 짧고, 사회로의 복귀가 빠르며, 고위험군에 적용할 수 있고, 무엇보다도 미용상의 이점이 크다는 면에서 자연기흉에 대해 유용한 치료방법임에는 틀림이 없으나 개흉술에 비해 재발율이 높고 비용이 비싸다는 문제가 제기되고 있는 만큼
Journal of Korean Society for Atmospheric Environment
/
v.21
no.1
/
pp.119-129
/
2005
The ambient TSP data measured at Seoul, Incheon. Taean, Daegu, Busan in Korea were used to explain the chemical composition and general features of Asian Dust (AD) observed in Korea. 9 episodes out of 19 were sampled from 2000 through May 2002, and measurements were conducted covering ionic and metal components with mass concentration. The results showed that daily averaged mass concentration (TSP) during the AD episodes was 458 $\mu\textrm{g}$/㎥, and ionic and metal concentrations were 27.93 $\mu\textrm{g}$/㎥ and 71.7 $\mu\textrm{g}$/㎥, respectively, accounting for 6.1 % and 15.5% of the total aerosol mass. TSP concentrations during episodes were varied from 120 to 1742 $\mu\textrm{g}$/㎥ according to the impact of Asian Dusts and had a tendency of showing higher values at sites in the west side of Korea, which can be explained by the effect of diffusion and deposition. In this study, ionic components like Ca (NO$_3$)$_2$, CaSO$_4$, NaNO$_3$, Na$_2$SO$_4$ were prominent types in secondary aerosol during AD periods and also indicated that V, Co as well as soil elements such as Ca, Fe, Mg, Mn, K correlated well with Al, while Cu, Cd, Pb, Zn didn't agree well with it. In addition, enrichment factors (EFs) for each metal component were obtained to provide simple information about source contribution of Asian Dust, and the results were compared with those from other AD studies. In this study, the results showed that aerosol properties in Korea during the Asian Dust were considerably different from those of general atmospheric condition and specially varied from case to case rather than site to site, which implies that there are certain variations in the soil of source region, pathways of air mass, and meteorological condition. For the enhanced study, those factors should be combined with the features of Asian Dust resolved from this study.
The effect of different treatments on the quality and yield of purified agar produced from Gelidium amansii has been studied, and the extraction condition ol agar produced from G. amansii has been examined. The contents of ash, sulfate in agar produced from g. amansii collected from different places were $2.63\~2.92\%\;and\;1.38\~1.78\%$, respectively. Yields and gel strength of agar produced from G. amansii collected from different places were $31.6\~46.8\%\;and\;496\~887g/cm^2$, respectively. It was effective to extract agar at $120^{\circ}C\;for\;2\~3hrs$. Agar was purified by D.W. washing, EDTA washing, chitosan treatment, CPC treatment, PEG treatment, ethanol precipitation, acetone precipitation and propanol precipitation. The mineral contents of agar produced from Gelidium amansii were Na (2934ppm), Ca (2472ppm), Mg (2259ppm), K (2527ppm), P1(81.1ppm), Fe (66.4ppm), Al (71.7ppm), Zn (29.7ppm) and Pb (ND: not detected), respectively.
To assess the adsorption and removal mechanism of dissolved inorganic nutrients in seawater by scattering yellow loess, a laboratory experiment was conducted for the change of nutrient concentration in seawater during the course of time depending on particle size and scattered concentration of the yellow loess. Twenty four hours after the addition of yellow loess in the size range of 0 $\mu$m to 500 $\mu$m in seawater, the removal rate of dissolved inorganic phosphorus (DIP) was increased with increasing amount of yellow loess. There was little difference among the removal rates depending on the size of yellow loess. On average, $26\%$ of dissolved inorganic silicate was reduced for the same period. No greate difference among the removal rate depending on both size and amount of yellow loess was found. Our results suggested that the removal mechanism of DU seemed to be associated with mostly the chemical bond with iron. More than $99\%$ of initial DU concentration was likely to be removed by this mechanism. In the case of inorganic dissolved silicate, the removal mechanism was likely to be attributed to a cation exchange between the yellow loess and seawater.
Piecewise Integrated Composite (PIC) beam is composed of different stacking against loading type depending upon location. The aim of current study is to assign robust stacking sequences against external loading to every corresponding part of the PIC beam based on the value of stress triaxiality at generated reference points using the k-NN (k-Nearest Neighbor) classification, which is one of representative machine learning techniques, in order to excellent superior bending characteristics. The stress triaxiality at reference points is obtained by three-point bending analysis of the Al beam with training data categorizing the type of external loading, i.e., tension, compression or shear. Loading types of each plane of the beam were classified by independent plane scheme as well as total beam scheme. Also, loading fidelities were calibrated for each case with the variation of hyper-parameters. Most effective stacking sequences were mapped into the PIC beam based on the k-NN classification model with the highest loading fidelity. FE analysis result shows the PIC beam has superior external loading resistance and energy absorption compared to conventional beam.
The aim of this study was to investigate the accumulation of metallic elements and the control effect of marine pollution caused by ocean dumping in the sediments at a waste disposal area in the Yellow Sea. In July 2009, concentrations of organic matter and metallic elements (Al, Fe, As, Cd, Cr, Co, Hg, Ni, Mn, Pb, and Zn) were measured in surface sediments at the site. The ignition loss (IL) in the surface sediments showed a mean value of 15.4%, about 1.5 times higher than the mean value of the sediments in the coastal areas of Korea. The chemical oxygen demand (COD) at some disposal sites exceeded 20 mg $O_2/g{\cdot}dry$, which signifies the initial concentration of marine sediment pollutants in Japan. The disposal sites contain higher concentrations of Cr, Cu and Zn than the sediments of bays and estuaries that might be contaminated. The magnitude of both metal enrichment factors (EF) and adverse biological effects suggest that pollution with Cr and Ni occurred due to the dumping of waste in the study area. In addition, the geoaccumulation index (Igeo) showed that the surface sediments were moderately contaminated. By the mid-2000s, when the amount of waste dumped at this site was the highest, the concentration of metallic elements was higher than ever recorded. On the other hand, in 2008-09, the need for environmental management was relatively low compare with the peak. As a result, the quality of marine sediment has been enhanced, considering the effect of waste reduction and natural dilution in the disposal area.
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2008.06a
/
pp.66-66
/
2008
Most of the properties of ITO films depend on their substrate nature, deposition techniques and ITO film composition. For the display panel application, it is normally deposited on the glass substrate which has high strain point (>575 degree) and must be deposited at a temperature higher than $250^{\circ}C$ and then annealed at a temperature higher than $300^{\circ}C$ in order to high optical transmittance in the visible region, low reactivity and chemical duration. But the high strain point glass (HSPG) used as FPDs is blocking popularization of large sizes FPDs because it is more expensive than a soda lime glass (SLG). If the SLG could be used as substrate for FPDs, then diffusion of Na ion from the substrate occurs into the ITO films during annealing or heat treatment on manufacturing process and it affects the properties. Therefore proper care should be followed to minimize Na ion diffusion. In this study, we investigate the electrical, optical and structural properties of ITO films deposited on the SLG and the Asahi glass(PD200) substrate by rf magnetron sputtering using a ceramic target ($In_2O_3:SnO_2$, 90:10wt.%). These films were annealed in $N_2$ and air atmosphere at $400^{\circ}C$ for 20min, 1hr, and 2hrs. ITO films deposited on the SLG show a high electrical resistivity and structural defect as compared with those deposited on the PD200 due to the Na ion from the SLG on diffuse to the ITO film by annealing. However these properties can be improved by introducing a barrier layer of $SiO_2$ or $Al_2O_3$ between ITO film and the SLG substrate. The characteristics of films were examined by the 4-point probe, FE-SEM, UV-VIS spectrometer, and X-ray diffraction. SIMS analysis confirmed that barrier layer inhibited Na ion diffusion from the SLG.
Kim, Eunju;Park, Geunyeong;Kim, Sunwoong;Kil, Youngwoo;Yang, Kyounghee
The Journal of the Petrological Society of Korea
/
v.26
no.4
/
pp.311-325
/
2017
Peridotite xenoliths in middle Miocene alkaline basalt from the Mt. Baekdu area are mainly anhydrous spinel lherzolites, displaying coarse-grained protogranular texture. These xenoliths have late-stage secondary orthopyroxene replacing olivine as the metasomatic mineral and glass formed along the grain boundaries. The studied xenoliths are characterized by the high $Mg{\sharp}[=100{\times}Mg/(Mg+Fe_{total})$ atomic ratio] of olivine, orthopyroxene and clinopyroxene (89~92) and the $Cr{\sharp}[=100{\times}Cr/(Cr+Al)$ atomic ratio] of spinel (10~29). Based on major-element data, the studied xenoliths are similar to those from the abyssal peridotites. Clinopyroxenes of the xenoliths are mostly enriched in incompatible trace elements, exhibiting two types of REE patterns: (1) LREE-depleted with $(La/Yb)_N$ of 0.1~0.2 and $(La/Ce)_N$ of 0.4~0.8. (2) LREE enriched with $(La/Yb)_N$ of 2.2~3.8 and $(La/Ce)_N$ of 1.2~1.6. The calculated equilibrium temperatures and oxygen fugacities resulted in $920{\sim}1050^{\circ}C$ and ${\Delta}fO_2(QFM)=-0.8{\sim}0.2$, respectively. It is suggested that the Mt. Baekdu peridotite xenoliths represent residues left after variable degrees of melt extraction(less than 15 vol%), which was subsequently subjected to different degrees of modal/cryptic metasomatism by silica- and LREE-enriched fluids (or melts).
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.