• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.1
• /
• pp.68-74
• /
• 2010

Since ${NO_3}^-$ is amore favorable electron acceptor than Fe, high ${NO_3}^-$ loads function as a redox buffer limiting the reduction of Fe and following release of ${PO_4}^{3-}$ in flooded paddy soil. The effect ${NO_3}^-$ loaded through irrigation water on Fe reduction and ${PO_4}^{3-}$ release in paddy soil was investigated. Pot experiment was conducted where irrigation water containing 5 or 10 mg N $L^{-1}$ of ${NO_3}^-$ was continuously applied at 1 cm $day^{-1}$, and changes of ${NO_3}^-$, $Fe^{2+}$ and ${PO_4}^{3-}$ concentrations in soil solution at 5 and 10 cm depths beneath the soil surface were monitored as a function of time. Irrigation of rice paddy with water containing 5 mg N $L^{-1}$ of ${NO_3}^-$ led to reduced release of $Fe^{2+}$ and prevented solubilization of P at 5 cm depth beneath the soil surface. And application of irrigation water containing 10 mg N $L^{-1}$ of ${NO_3}^-$ could further suppress Fe reduction and solubilization of P through 10 cm depth soil layer beneath the surface. These results suggest that the introduction of high level ${NO_3}^-$ with irrigation water in rice paddy can strongly limit Fe reduction and P solubilization in root zone soil layer in addition to the excessive supply of N to rice plants.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.10 no.1
• /
• pp.38-46
• /
• 2005

This study was carried out to quantify the rates of anaerobic mineralization and sulfate reduction, and to discuss the potential effects of benthic fauna on sulfate reduction in total anaerobic carbon respiration in Ganghwa intertidal flat in Korea. Anaerobic carbon mineralization rates ranged from 26 to 85 mmol $C\;m^{-2}\;d^{-1}$, which accounted for approximately 46 tons of daily organic matter mineralization in the intertidal flat of southern part of the Ganghwa Island (approximately $90\;km^2$). Sulfate reduction ranged from 22.6 to 533.4 nmol $cm^{-3}\;d^{-1}$, and were responsible for $31{\sim}129%$ of total anaerobic carbon oxidation, which indicated that sulfate reduction was a dominant pathway for anaerobic carbon oxidation in the study area. On the other hand, the partitioning of sulfate reduction in anaerobic carbon mineralization in October decreased, whereas concentrations of Fe(II) in the pore water increased. The results implied that the re-oxidation of Fe(II) in the sediments is stimulated by macrobenthic activity, leading to an increased supply of reactive Fe(II), and thereby increasing Fe(III) reduction to depress sulfate reduction during carbon oxidation.

• Journal of Satellite, Information and Communications
• /
• v.6 no.2
• /
• pp.46-50
• /
• 2011

In order to perform the satellite structural analysis, FE-Model(Finite Element Model) considering all mechanical properties is necessary. Generally, different companies develop several satellite components, and sometimes it is very difficult to obtain FE-Model. In this case, FE-Model reduction using superelement method can be good solution. For developing satellite, antenna manufacturer required satellite FE-Model to calculate microvibration induced by antenna operation, and condensed model using superelement method was provided. Superelement method is based on Craig-Bampton method, and it is applied to spacecraft FE-Model reduction in this paper. From modal analysis and the frequency response analysis results between full FE-Model and condensed model, the usefulness of reduced model is confirmed.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.543-553
• /
• 1996

Oxygen reduction in an alkaline fuel cell was studied by using perovskite type oxides as an oxygen electrode catalyst. The high surface area catalysts were prepared by malic acid method and had a formula of $La_{0.6}Sr_{0.4}Co_{1-x}Fe_xO_3$(x=0.00, 0.01, 0.10, 0.20, 0.35 and 0.50). From the result of XRD pattern and specific surface area due to the amount of Fe substitution and the consumption of ammonia-water, the complex formation of Fe ion with $NH_3$ was the main factor for both the phase stability of perovskite and the increase of specific surface area. Multi-step calcination was necessary to give a single phase of perovskite in catalyst precursor. The crystal structure of the catalysts was simple cubic perovskite, which was verified from the XRD patterns of the catalysts. The activity of oxygen reduction was monitored by the techniques of cyclic voltammetry, static voltage-current method, and current interruption method. The activity(current density) of oxygen reduction showed its minimum at x=0.01 and its maximum between 0.20 and 0.35 of x-value in $La_{0.6}Sr_{0.4}Co_{1-x}Fe_xO_3$. This tendency was independent of the change of surface area.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.79-85
• /
• 1997

Fe$_2$O$_3$ thin films were prepared on $Al_2$O$_3$ substrate by PECVD(Plasma-Enhanced Chemical Vapor Deposition) process. The phase transformation of iron oxide film was determined as the substrate temperature and reduction-oxidation process. $\alpha$-Fe$_2$O$_3$ was stable in deposition temperature ranges of 80~15$0^{\circ}C$. Fe$_3$O$_4$ phase was obtained by the reduction process of $\alpha$-Fe$_2$O$_3$ phase in H$_2$ ambient. Fe$_3$O$_4$ phase was transformed into a ${\gamma}$-Fe$_2$O$_3$ thin film under controlled oxidation conditions at 280~30$0^{\circ}C$.

• Journal of Powder Materials
• /
• v.9 no.3
• /
• pp.182-188
• /
• 2002

Conventional Fe-Co alloys are important soft magnetic materials that have been widely used in industry. Compared to its polycrystalline counterpart, the nanostructured materials have showed superior magnetic properties, such as higher permeability and lower coercivity due to the single domain configuration. However, magnetic properties of nanostructured materials are affected in complicated manner by their microstructure such as grain size, internal strain and crystal structure. Thus, studies on synthesis of nanostructured materials with controlled microstructure are necessary for a significant improvement in magnetic properties. In the present work, starting with two powder mixtures of Fe and Co produced by mechanical alloying (MA) and hydrogen reduction process (HRP), differences in the preparation process and in the resulting microstructural characteristics will be described for the nano-sized Fe-Co alloy particles. Moreover, we discuss the effect of the microstructure such as crystal structure and grain size of Fe-Co alloys on the magnetic properties.

• Journal of Powder Materials
• /
• v.14 no.3 s.62
• /
• pp.185-189
• /
• 2007

Various approaches have been proposed to increase the green density. Warm compaction method has been used for the reduction of residual stress, the improvement of magnetic properties and the higher densities. In this work, the effect of warm compaction on green density of Fe powder was investigated. After ball-milling of Fe oxide powder for 30 hours, Fe oxide powder was reduced through the hydrogen reduction process. The pure Fe powder and polymer binder were mixed by 3-D tubular mixer. And then the mixed powder was warm-compacted with various compaction pressure and binder contents. The green density of specimen was added polyvinyl binder was higher than any other specimens.

• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.236-236
• /
• 2003

Anaerobic Fe(III)-reducing bacteria are known to be able to reduce crystalline and amorphous Fe(III) oxides. Anaerobic Fe(III)-reducing bacterial reduction can induce several kinds of secondary minerals (Fe(II) containing minerals) such as magnetite, siderite, vivianite [($Fe_{3}(PO_{4}{\cdot}2H_{2}O$], and iron sulfide (FeS) according to variety of geochemical and biological conditions. (omitted)

• Journal of the Korean Society for Heat Treatment
• /
• v.4 no.2
• /
• pp.9-18
• /
• 1991

Among the many maunfactured processes of producing multi filamentary composites, in situ process is widely used owing tv its simplicity and easyness of mass production. In this study, the mechanical and electromagnetic properties of Cu-Fe composite materials was investigated. The tensile strength of the Cu-Fe wires increased as the Fe content and reduction ratio were increased. The Cu-30 wt%Fe composites had the best properties in terms of figure merits compared to the other Cu-Fe composites made in this study or the commercially manufactured 6/1 ACSR cables of Cu cable. The coercivity was decreased by increasing Fe content, but the squareness was increased greatly. As increasing reduction ratio, the coercivity and squareness increased up to the maximum points, and then decreased. For example, the maximum values were obtained at $0.09mm{\phi}$ for Cu-30 wt%Fe composites and at $0.066mm{\phi}$ for Cu-45 wt%Fe composites. The magnetic property of Cu-Fe wires produced by precipitation treatment was higher than that of Cu-Fe wires produced by thermomechanical treatment. By annealing Cu-Fe wires after drawing process, the coercivity, remanence and squareness were improved.

• Journal of Electrochemical Science and Technology
• /
• v.12 no.1
• /
• pp.137-145
• /
• 2021

Among the non-precious metal catalysts, iron-nitrogen doped carbon (Fe-N/C) catalysts have been recognized as the most promising candidates for an alternative to Pt-based catalysts for the oxygen reduction reaction (ORR) under alkaline and acidic conditions. In this study, the nano replication method using mesoporous silica, which features tunable primary particle sizes and shape, is employed to prepare the mesoporous Fe-N/C catalysts with different shapes. Platelet SBA-15, irregular KIT-6, and spherical silica particle (SSP) were selected as a template to generate three different kinds of shapes of the mesoporous Fe-N/C catalyst. Physicochemical properties of mesoporous Fe-N/C catalysts are characterized by using small-angle X-ray diffraction, nitrogen adsorption-desorption isotherms, and scanning electron microscopy images. According to the electrochemical evaluation, there is no morphological preference of mesoporous Fe-N/C catalysts toward the ORR activity with half-cell configuration under alkaline electrolyte. By implementing X-ray photoelectron spectroscopy analysis of Fe and N atoms in the mesoporous Fe-N/C catalysts, it is possible to verify that the activity towards ORR highly depends on the portions of "Fe-N" species in the catalysts regardless of the shape of catalysts. It was suggested that active site distribution in the Fe-N/C is one important factor towards ORR activity.