• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.1
• /
• pp.46-52
• /
• 2004

Hisardale male lambs (n=24, 4-5 month of age) were maintained on a conventional ration for a month, to equilibrate the body mineral status. Six lambs were sacrificed after one month of feeding; the samples of organs were analyzed to ascertain mineral status. The remaining 18 lambs were divided into 3 groups of 6 each on body weight basis. Three dietary treatments containing 100 ($T_1$), 110 ($T_2$) and 120% ($T_3$) of minerals (Ca, P, S, Zn and Mn) as specified by NRC (1985) were formulated and each treatment was alloted ad libitum to a group for 120 days. Blood and wool samples were collected at monthly intervals. At the end of the experiment a balance trial of 5 days duration was conducted to study the balance of mineral elements. The effective intake of minerals was Ca, 111 and 120, P, 110 and 122; S, 112 and 129; Zn, 112 and 126 and Mn, 109 and 123 percent in $T_2$ and $T_3$, respectively, in comparison to $T_1$ (100). The additional mineral supplementation had no significant effect on dry matter intake. The average daily weight gain was higher (p<0.01) in $T_2$ and $T_3$ than the control ($T_1$). The lambs under treatments $T_2$ (8.72) and $T_3$ (8.47 kg) consumed apparently lesser amount of dry matter per unit gain as compared to $T_1$ (10.81 kg). Significantly higher (p<0.05) dry matter and crude protein digestibility (%) were observed in $T_2$ and $T_3$ than in $T_1$. The mean balances for different elements were Ca, 1.14, 1.68 and 1.67 g; P, 1.70, 1.95 and 2.18 g; S, 0.54, 0.92 and 1.11 g; Zn, 22.56, 25.30 and 28.71 mg; Cu, 7.94, 5.71 and 5.53 mg; Fe, 33.19, 32.94 and 31.03 mg and Mn, 8.24, 14.40 and 16.07 mg/lamb/day. The retention of supplemental minerals increased (p<0.01) while that of Cu decreased (p<0.01) due to supplementation of minerals (Ca, P, S, Zn and Mn). Retention as per cent of intake increased statistically for S and Mn while that of Cu decreased. It can be concluded that supplementation of minerals (Ca, P, S, Zn and Mn) higher than the recommended level improved body weight gain and feed to gain ratio. The retention of minerals increased due to supplementation. Therefore, an additional supplementation of deficient minerals (Ca, P, S, Zn and Mn) by 10% was beneficial for Hisardale male lambs under tropical condition in India.

• Korean Journal of Materials Research
• /
• v.20 no.12
• /
• pp.661-668
• /
• 2010

Cu(In,Ga)$Se_2$(CIGS) photovoltaic thin films were electrodeposited on Mo/glass substrates with an aqueous solution containing 2 mM $CuCl_2$, 8 mM $InCl_3$, 20 mM $GaCl_3$ and 8mM $H_2SeO_3$ at the electrodeposition potential of -0.6 to -1.0 V(SCE) and pH of 1.8. The best chemical composition of $Cu_{1.05}In_{0.8}Ga_{0.13}Se_2$ was found to be achieved at -0.7 V(SCE). The precursor Cu-In-Ga-Se films were annealed for crystallization to chalcopyrite structure at temperatures of 100-$500^{\circ}C$ under Ar gas atmosphere. The chemical compositions, microstructures, surface morphologies, and crystallographic structures of the annealed films were analyzed by EPMA, FE-SEM, AFM, and XRD, respectively. The precursor Cu-In-Ga-Se grains were grown sparsely on the Mo-back contact and also had very rough surfaces. However, after annealing treatment beginning at $200^{\circ}C$, the empty spaces between grains were removed and the grains showed well developed columnar shapes with smooth surfaces. The precursor Cu-In-Ga-Se films were also annealed at the temperature of $500^{\circ}C$ for 60 min under Se gas atmosphere to suppress the Se volatilization. The Se amount on the CIGS film after selenization annealing increased above the Se amount of the electrodeposited state and the $MoSe_2$ phase occurred, resulting from the diffusion of Se through the CIGS film and interaction with Mo back electrode. However, the selenization-annealed films showed higher crystallinity values than did the films annealed under Ar atmosphere with a chemical composition closer to that of the electrodeposited state.

• Resources Recycling
• /
• v.25 no.2
• /
• pp.33-41
• /
• 2016

A scale up tests (380 kg/day) using a continuous solvent extraction and electro-winning system was carried out to separate and recover cobalt from a solution containing 1.91 g/L Co and 14.65 g/L Ni. The solution was obtained during a process including solvent extraction and precipitation stages for removal of Cu and Fe from a synthetic sulfuric acid solution of manganese nodule matte. The optimal condition for solvent extraction was : solvent concentration of 0.22M Na-Cyanex 272 (45% saponified with NaOH) and O:A phase ratios of 1:1.5, 10:1 and 1.5:1 used in extraction, scrubbing and stripping stages, respectively. The extraction and stripping efficiencies were found to be 99.8% and 99.88%, respectively. The stripped solution contained 40.27 g/L Co with 4 ppm Ni. Cobalt metal of 99.963% purity was yielded with current efficiency of 67% and current density of $0.563A/dm^2$ during the electro-winning process.

• Journal of Conservation Science
• /
• v.33 no.4
• /
• pp.283-295
• /
• 2017

It is crucial to measure meteorological elements in relation to the biodeterioration of building cultural heritages. The Beopjusa and Seonamsa temples located respectively in Chungbuk and Jeonnam provinces, Korea, exhibit biological damage to the building cultural heritages and cause noticeable climatic differences. To compare biodeterioration environments of the abovementioned temples, 10 meteorological elements were observed, and particulate matter (TSP) was collected at each location. Furthermore, a correlation analysis was conducted between meteorological elements, and between meteorological elements and TSP. The local meteorology at Beopjusa temple characteristically showcased high total horizontal radiation, UV radiation, evaporation, wind speed, and TSP concentration, whereas, that at Seonamsa temple showcased high temperature, humidity, dew point temperature, air pressure, precipitation and number of days with precipitation. An elemental analysis of TSP revealed the presence of sae-salts at Seonamsa temple, and compared to that of Beopjusa temple, the monthly frequencies of biogenic aerosol and Fe-containing particles were higher. The correlation analysis showed that wind speed and humidity were major meteorological factors at Beopjusa and Seonamsa temples, respectively. Subsequently, the characteristics of the local meteorology at Seonamsa temple are expected to affect the biological damage of the building cultural heritages, which is favorable for the growth of various organisms.

• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.945-950
• /
• 2007

The stormwater runoff from paved area are highly polluted because of particulate materials as well as metals from various vehicular activities. The Division of Road Maintenance in Ministry of Construction and Transportation was recently developed the Guidelines of Environment-kindly Road Maintenance. It is actually requiring the BMP construction to control the nonpoint source pollution as based on the TMDL program. This research is carried out in order to define the characteristics of stormwater runoff from the toll-gate of highways since 2006, which is actually one of the main pollutant sources of paved areas. This monitoring is the first phase work for establishing the treatment facilities in the toll-gates. The one of the main characteristics from toll-gate runoff is the first flush phenomenon containing lots of sediments and metal compounds at the beginning of a storm event. Usually it is used to determine the size of treatment facilities and to calculate the reduced pollutant mass in the facility. The research results shows that the mean EMC vaules for heavy metals are determined to $274.3{\mu}g/L$ for Cd, $1,273.4{\mu}g/L$ for Cr, $1,822.0{\mu}g/L$ for Cu, $6,504.9{\mu}g/L$ for Fe, $14,930.3{\mu}g/L$ for Pb, and $714.1{\mu}g/L$ for Zn. Also the metal mass loadings from the toll-gates are calculated using EMC, watershed area and storm duration.

• Korean journal of food and cookery science
• /
• v.15 no.6
• /
• pp.603-610
• /
• 1999

The purposes of this study were to investigate the applicability of pork liver in manufacturing sausages and to examine the nutritional components of liver sausages prepared. Sausages containing different proportions of pork liver were manufactured with various processes and were analysed for their nutritional value. Based on the basic recipe for manufacturing sausages, fifteen recipes were proposed with different combinations of ingredients. Sausages manufactured with different methods (sliceable, spreadable, smoked spreadable) and different proportions of liver also were evaluated. The results were obtained as follows : 1. The average contents of moisture, protein, fat, carbohydrate, fiber, ash, and energy were 62.31 %, 15.71 %, 17.12%, 3.88%, 0.24%, 1.48%, and 234.04 kcal/100 g respectively. As the percentage of liver increased, the fat content and total energy were decreased significantly. 2. As the percentage of liver in sausage increased, the content of amino acids including valine, leucine, isoleucine, threonine, lysine, phenylalanine, arginine, aspartic acid, glycine, proline, tyrosine, and cysteine was increased. However, the contents of histidine, methionine, glutamic acid, and alanine were decreased. 3. The vitamin A content of liver sausage was increased by 11 times compared with the control, however, the content of vitamin B was slightly decreased. 4. As the percentage of the liver was increased in sausage, the content of minerals such as calcium, magnesium, phosphorus, sodium, potassium, and iron were increased.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.405-420
• /
• 2020

A convergence research was conducted on glass beads excavated at the ruins of Hapgang-ri, Sejong, using the archeology and conservation approach. The period of appearance of Jugu Towangmyo in the ruins of Hapgang-ri can be estimated to begin in the late 2^nd century; for Jugu Towangmyo No. 15, the period spans from the late 2^nd to early 3^rd century. Form, color, and manufacturing techniques of complete glass beads were examined, and the cross-sections and chemical composition of 16 samples were observed. Based on these analyses, the glass beads were divided into blue, purple, and red colors. The blue-colored beads could be further sub-divided based on their gloss and brightness; in contrast, the red-colored beads were highly uniform with regard to these parameters. Based on the stripe and bubble arrangement on the surface of the glass beads, their drawing technique was identified. Traces of heat treatment or polishing were observed at the ends of the beads. According to their chemical composition, the 16 samples were classified into 3 potash glass and 13 soda glass groups; in the latter, the properties of the stabilizers were divided according to the blue and red bead colors. The stabilizers of the red beads are unique in that they allow the distinction among beads excavated in other areas in South Korea owing to their compositional differences. Colorants in blue- and red-colored beads are cobalt (containing MnO), and copper and iron, respectively.

• Microbiology and Biotechnology Letters
• /
• v.20 no.5
• /
• pp.574-582
• /
• 1992

Exo-xylanase encoded by the xylA gene of Bacillus stearothermoPhillus was produced from Escherichia coli ]M109 carrying a recombinant plasmid pMGL Synthesis of the enzyme was observed to be cell-associated, and about 94% of the enzyme synthesized was located in the cytoplasmic region. The maximum production was attained when the E. coli strain was grown at $37^{\circ}C$ for 8 hours on the medium containing 0.5% fructose, 1.0% tryptone, 1.0% sodium chloride, and 0.5% yeast extract. The exo-xylanase was purified to homogeneity using a combination of salting out with ammonium sulfate, DEAE-Sepharose CL-6B ion exchange chromatography, Sephadex G-IOO gel filtration, and Sephadex G-150 gel filtration. The' purified enzyme was most active at pH 6.0 and $45^{\circ}C$. $Ca^{2+}$ and $Co^{2+}$ activated the exo-xylanase activity by about 20% while $Ag^{2+}$, $Fe^{2+}$, $Mg^{2+}$ and $Zn^{2+}$ inhibited the enzyme activity by up to 60%. The $K_m$, value on p-nitrophenyl-$\beta$-D-xylanopyranoside was 2.75 mM. The enzyme had a pI value of 4.7. The estimated molecular weight of the native protein was 200,000 daL SDS-polyacrylamide gel electrophoresis analysis suggested that the native enzyme was a trimer composed of three identical 66,000 da!. polypeptides. The purified enzyme efficiently converted all the xylo-oligosaccharides tested to xylose. It was also confirmed that the enzyme split xylans in an exo-manner even though the degree of hydrolysis was fairly low. The xylanolytic enzyme was, therefore, classified to be one of the few bacterial exo-xylanases lacking transferase activity.

• Horticultural Science & Technology
• /
• v.28 no.5
• /
• pp.735-742
• /
• 2010

Objective of this research was to investigate the influence of liming fertilizers on changes in soil chemical properties and growth of pansy 'Melody Yellow' in plug production. To achieve this, dolomite (DO) with 0, 1.0, 3.5, 8.0 or $13.0g{\cdot}L^{-1}$ and calcium carbonate (CC) with 0, 2.0, 2.5, 3.0, 3.5, or $4.0g{\cdot}L^{-1}$ in application rate were incorporated into peatmoss + vermiculite (1:1, v/v) during the formulation. The treatments of $3.5g{\cdot}L^{-1}$ of DO and 2.5 or $3.0g{\cdot}L^{-1}$ of CC had acceptable range of soil solution pH such as 5.6-6.2. Faster rising of pH was observed in root media containing CC rather than those of DO, indicating higher solubility of CC. The soil Ca concentrations in all treatments of CC were 2 times as high as those of DO. The treatments of 3.5 or $8.0g{\cdot}L^{-1}$ of DO had the highest soil Mg concentrations, but all treatments of CC had lower soil Mg concentrations than control indicating that additional applications of Mg fertilizers are required. The elevated application rate of DO or CC resulted in the increase of fresh and dry weight; however, plant heights were not influenced by application of liming fertilizers. The results of tissue analysis showed that application of DO or CC influenced the Ca and Mg contents, but did not influence the contents of other nutrients such as N, P, Fe, Mn, Zn and Cu.

• Korean Journal of Food Science and Technology
• /
• v.27 no.5
• /
• pp.819-825
• /
• 1995

Two sweet potato CV.(Ipomoea batatas) were examined, i.e. purple flesh sweet potato(PSP) and light yellow flesh sweet potato(LYSP) which varied in degree of sweetness. On a fresh weight basis, nitrogen free extract in cultivars ranged from $25.73{\sim}26.24%$ and PSP contained more crude fat than LYSP. Total amino acids of PSP and LYSP were 5676.57mg% and 4550.86mg%, respectively. Aspartic acid, serine, alanine and valine were the major components in sweet potatoes. Sulfur-containing amino acids are the first limiting amino acid in PSP. The major fatty acids in PSP and LYSP analyzed by GC were palmitic acid, linoleic acid. The content of the saturated fatty acid was less than that of the unsaturated fatty acid. Carbohydrate contents were $75.43{\sim}79.10%$ and neutral sugars contents were $67.22{\sim}64.85%$(dry wt). Two sweet potato CV. contained the most glucose of all neutral sugars. PSP contained 11.88% for uronic acid, 59.42% for starch. Free sugars of PSP(0.82%) was much less than that of LYSP(2.53%). The contents of thiamin, riboflavin and niacin were similar, and the ascorbic acid contents in PSP and LYSP were 63.4mg% and 48.7mg%(dry wt), respectively. Comparing the mineral content in PSP, K was the greatest element in concentration followed by mg, Ca, Na. The total dietary fiber(TDF) value was 13.43% in PSP, 9.79% in LYSP respectively. The ratio of soluble dietary fiber(SDF) content and insoluble dietary fiber(IDF) content to TDF content for PSP were 57.6%, 42.4%, respectively.