• Journal of the Mineralogical Society of Korea
• /
• v.2 no.1
• /
• pp.8-10
• /
• 1989

Sphene from the McDonald pegmatite near Bancroft, Ontario, Canada was analyzed using EPMA. It contains 4.3 to 6.3 weight percent of Nb2O5 with an average formula Ca1.02(Ti0.62Al0.22Nb0.07Fe0.06Ta0.01)Si0.99(O4.85F0.16). Three types of subtitutions are possible; 1)2Ti4+=(Nb, Ta)5+ + (Al, Fe3+), 2) Ti + O = (Al, Fe3+) + (F, OH), and 3) 2Ti + O = Fe2+ + (Nb, Ta)5+ + (F, OH). T재 different schemes of substitutions for balancing the analysis are considered when the iron is either all ferric or all ferrous. Assuming stoichiometry fo Ca and Si, a general formula derived from the two different schemes is Ca(Ti0.64Al0.22Fe3+0.06-X {{{{Fe_{x}^{2+} }} Nb0.01)Sio4.80-XF0.16(OH)0.04+x.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.11a
• /
• pp.116-116
• /
• 2001

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.11a
• /
• pp.31-31
• /
• 1999

• Korean Journal of Metals and Materials
• /
• v.47 no.6
• /
• pp.344-348
• /
• 2009

Dense $4.25Co_{0.53}Fe_{0.47}-Al_{2}O_{3}$ composite was simultaneously synthesized and consolidated by pulsed current activated combustion method within 2 min from mechanically activated powders. Consolidation was accomplished under the combined effects of a pulsed current and mechanical pressure. Dense $4.25Co_{0.53}Fe_{0.47}-Al_{2}O_{3}$ with relative density of up to 96% was produced under simultaneous application of 80 MPa pressure and the pulsed current. Fracture toughness and hardness of the composite are $6MPa{\cdot}m^{1/2}$ and $570kg/mm^{2}$ respectively.

• Korean Journal of Metals and Materials
• /
• v.47 no.11
• /
• pp.754-758
• /
• 2009

Dense $5Cu_{0.6}Fe_{0.4}-Al_{2}O_{3}$ composite was consolidated from mechanically synthesized powders by high frequency induction heating method within 2 min. Consolidation was accomplished under the combined effects of a induced current and mechanical pressure. Dense $5Cu_{0.6}Fe_{0.4}-Al_{2}O_{3}$ with relative density of up to 95% was produced under simultaneous application of a 80 MPa pressure and the pulsed current. Fracture toughness and hardness of the composite are $7.6MPa{\cdot}m^{1/2}$ and $844kg/mm^{2}$ respectively.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2000.11a
• /
• pp.155-155
• /
• 2000

• Journal of the Korean institute of surface engineering
• /
• v.34 no.2
• /
• pp.135-141
• /
• 2001

Arc-melted Ti-6Al-4V, Ti-4Fe and Ti-(1,2) Si alloys were oxidized at 700, 800, 900 and $1000^{\circ}C$ in air. The oxidation resistance of Ti-4Fe was comparable to that of Ti-6Al-4V, while the oxidation resistance of Ti-(1,2) Si was superior to that of Ti-6Al-4V. Ti-2Si displayed the best oxidation resistance among the four alloys, but failed after oxidation at $1000^{\circ}C$ for 17h. The oxide scale formed on Ti-6Al-4V, Ti-4Fe and Ti-(1,2)Si consisted of ($TiO_2$ and a small amount of $Al_2$$O_3$), ($TiO_2$ and a small amount of dissolved iron), and ($TiO_2$ plus a small concentration of amorphous $SiO_2$), respectively. The oxide grains of the surface scale of the four alloys were generally fine and round.

• Journal of Powder Materials
• /
• v.16 no.2
• /
• pp.91-97
• /
• 2009

Nanopowders of $Co_3O_4$ and FeAl were fabricated by high energy ball milling. Dense 4.25 $Co_{0.53}Fe_{0.47}-Al_2O_3$ composite was simultaneously synthesized and consolidated by high frequency induction heated combustion method within 2 min from mechanically activated powders. Consolidation was accomplished under the combined effects of a induced current and mechanical pressure of 80 MPa.

• Journal of the Korean Ceramic Society
• /
• v.31 no.3
• /
• pp.235-240
• /
• 1994

The electric and magnetic properties of Mg1.9-2xMn0.05Fe4xO4+${\gamma}$+2wt% Al2O3, and its microstructure have been investigated as a function of ferrite composition (x=0.45, 0.5, 0.55). The microstructure turned out to be independent on the ferrite composition. The resistivity was decreased with increasing Fe contents, whereas the Curie temperature decreased. Saturation magnetization was varied from 1741 to 2022 G with composition, and squareness ratio (SR), coercive force (BHc) were decreased and increased with increasing Fe contents respectively, so the sample which SR and BHc were 0.97 Oe and 1.49 Oe can be attainable at x=0.45.

• Journal of the Korean Ceramic Society
• /
• v.31 no.9
• /
• pp.1069-1075
• /
• 1994

When ceramics are used as the parts of an engine and a machine, the tribological properties are very important. For the preparation of the resistance material for wear applications by the method of Reaction-Bonded Sintering, metal silicon and carbon black are mixed up into SiC powder, and Al2O3 and Fe2O3 are put as an additive. As the general properties, the bending strength and water absortion are measured in the normal temperature and the phase changies are investigated with XRD. The property of the resistance for wear applications is measured with the amount of friction and wear, friction coefficient and maximum asperties. And, the surface of wear is observed with SEM. With the results of this study, the optimal mol ratio of Si : C and the suitable quantity of the mixture of SiC are 7 : 3 and 40 wt%, respectively. In the case of the addition of Al2O3 (2 wt%), the resistance for friction and wear applications is prominent. The bending strength showed the highest peak when Al2O3 (4 wt%) and Fe2O3 (4 wt%) were added. The properties of friction and wear were related with the propagation velocity of crack rather than the bending strength.