• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.2
• /
• pp.255-261
• /
• 2004

Antioxidant activity of extracts from the submerged-liquid culture of mushrooms was measured using two systems : linoleic acid and mouse liver microsomes induced by various free radical sources. Mushrooms of Pleurotus ostreatus (Neutari), Phellinus linteus (Sanghwang), Paecilomyces japonicus (Dongchunghacho), Hericicum erinacium (Norugungdengyee) and Agaricus blazei (Shinryeong) in 1% mulberry tree powder-supplemented medium were incubated in a shaking incubator (200 rpm, $25^{\circ}C$) for 3 days. Hot water extracts of mycelial cultures were freeze-dried, followed by fractioning with hexane, chloroform, ethylacetate and butanol in the order. Antioxidant activity of each sample was examined in free radical-induced linoleic acid oxidation in phosphate-buffered saline (PBS ) solution by measuring the amount of malonaldehyde (MA), and mouse liver microsomal systems by measuring the amount of thiobarbituric acid reactive substances (TBARS). In linoleic acid oxidation system, hot water extracts from the cultures of Pleurotus ostreatus, Phellinus linteus, and Paecilomyces japonicus exhibited stronger antioxidant activity than aqueous or butanol fraction and the combined fraction of hexane, chloroform and ethylacetate, but the hot water extract from Pleurotus ostreatus culture was the strongest activity. The antioxidant activity of the hot water extract from Pleurotus ostreatus culture was stronger than any other fractions in mouse microsomal system. These results suggest that hot water extract of Pleurotus ostreatus culture, and the cultures of Phellinus linteus and Paecilomyces japonicus could be useful for functional materials to reduce the oxidation of lipids in food systems induced by free radicals.

• Korean Journal of Materials Research
• /
• v.18 no.11
• /
• pp.583-591
• /
• 2008

In this study, two series of CNT/$TiO_2$ electrodes were prepared. The decrease of surface area compared with that of the pristine carbon nanotubes (CNTs) indicated the blocking of micropores on the surface of the CNTs; was further supported by scanning electron microscopy (SEM) and field emission SEM (FE-SEM) observations. The X-ray diffraction (XRD) results showed that the CNT/$TiO_2$ composites contained a mix of anatase and rutile forms of $TiO_2$ particles when the precursor was $TiO_2$ powder, whereas when the precursor was Ti ($OC_4H_7$) (TNB), the composites contained only the typical single and clear anatase $TiO_2$ particles. The energy dispersive X-ray spectroscopy (EDX) spectra showed the presence of C, O and Ti peaks for all samples. It was found that catalytic decomposition of methylene blue (MB) solution could be attributed to synthetic effects between the $TiO_2$ photocatalysis and electro-assisted CNTs network, and that photoelectrocatalytic oxidation increased with an increase of CNT composition. It was also found that the photoelectrocatalytic oxidation efficiency for MB is higher than that of photocatalytic oxidation. Moreover, the CNT/$TiO_2$ composites catalyst prepared by the impregnation method demonstrates higher photoelectrocatalytic activity than the mechanical mixture with the same CNT content.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1515-1516
• /
• 2011

Conductive SiC-$ZrB_2$ composites were produced by subjection a 40:60(vol%) mixture of zirconium diborided ($ZrB_2$) powder and ${\beta}$-silicon carbide (SiC) matrix to spark plasma sintering (SPS) under argon atmosphere. Inner diameters of graphite mold were $15mm{\varphi}$ and $20mm{\varphi}$, respectively. The relative densities of $15mm{\varphi}$ and $20mm{\varphi}$ sample were 99.4% and 97.88%, respectively. Reactions between ${\beta}$-SiC and $ZrB_2$ were not observed via x-ray diffraction (hereafter, XRD) analysis. The result of FE-SEM of fracture face of $15mm{\varphi}$ sample was intergranular fracture and that of $20mm{\varphi}$ sample was transgranular fracture. Because the fracture strength of $15mm{\varphi}$ sample was much higher than that of $20mm{\varphi}$ sample. The electrical resistivity, $9.37{\times}10^{-4}{\Omega}{\cdot}cm$ of $15mm{\varphi}$ sample was higher than that, $6.17{\times}10^{-4}{\Omega}{\cdot}cm$ of $20mm{\varphi}$ sample because of densification. Although sintering condition of SPS is same. the properties of sintered SiC-$ZrB_2$ compacts were changed according to inner diameter of graphite mold.

• Journal of the Korean Ceramic Society
• /
• v.35 no.3
• /
• pp.280-286
• /
• 1998

LaAlO3 Single crystals used as a substrate for thin film depositions of a high temperature oxide su-perconductor YB2Cu3O7 and applied to microwave frequencies were grown by the Traveling Solvent Flati-ing Zone (TSFZ) method and characterized. For the growth of LaAlO3 single crystals polycrystalline fe-edrods were prepared from powder mixture of La2O3 and Al2O3 with a mole ratio of 1:1 calcined at 110$0^{\circ}C$ for 3h and sintered at 140$0^{\circ}C$ for 4h The growth LaAlO3 crystals was 4-5mm in diameter 30mm in length and dark brown. The growth rate was 2-3mm/h and the rotation speeds were 10rpm for an upper ro-tation and 40 rpm for a lower rotation The growing crystals and the feedrods were counter-rotated. The orientation of the grown single crystals of LaAlO3 was identified to be [111] direction. Dielectric constants were measured to be 30-33 between 100 kHz and 1 MHz in the 30$0^{\circ}C$ to 45$0^{\circ}C$ temperature range and 102 in a range of 100 kHz at the phase transformation temperature of 522$^{\circ}C$ Dielectric losses were calculated to be 1.8$\times$10-4 at the room temperature and 5.7$\times$10-3 at the phase transformation temperature. Lattice con-stants of the grown crystlals were determined to be aR=5.3806 $\AA$ and $\alpha$=60.043$^{\circ}$ by the least square method.

• Fashion & Textile Research Journal
• /
• v.14 no.2
• /
• pp.320-330
• /
• 2012

The natural dyeing of cotton fabrics with guava leaf extract was investigated. The temperature and time of dyeing are $40^{\circ}C$ and $90^{\circ}C$ for eighty minutes, respectively. In addition, the dyebath has been set at pH 5. Sn pre-mordanted fabrics showed the highest K/S value. Regardless of dyeing temperature, K/S values were high when Al, Cu, Fe-mordanted fabrics were dyed in post-mordanting and Sn-mordanted fabrics were dyed in pre-mordanting. The K/S value of dyeing fabrics could be increased with repetitive dyeing and mordanting. Compared to untreated dyed fabrics, the K/ S values of fabrics which had been treated with soybean milk, chitosan and gall nut tannin were increased. The changed surface colors of fabrics that were treated with soybean milk, chitosan and gall nut tannin were Y, YR and achromatic colors. Fabrics dyed with alkaline water extract showed reddish color. Sn-mordanted fabrics dyed with acidic water extract showed vivid yellowish color, and Cu-mordanted fabrics dyed with ethanol extract showed yellowish green color. In case of Sn-mordanted fabrics, the washing fastness was level 4. The dry cleaning fastness also showed very excellent result with level 4-5. The rubbing fastness was better in dry rubbing than in wet rubbing of the fabrics. For the light fastness, all dyed fabrics showed low fastness. For antibacterial activity, the powder of guava leaf extract and the dyed fabrics with guava leaf extract showed 99.9% of high antibacterial activity. All dyed fabrics showed higher deodorization and UV protection rate than control fabric.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.6
• /
• pp.606-612
• /
• 1998

A microbial flocculant-producing gram-positive bacterium, strain TE11, was isolated from soil samples, and was identified as Bacillus subtilis by using the Midi system, the Biolog system, 16S rDNA sequence analysis, and some physiological and morphological characteristics. The maximum flocculant capsular biopolymer of TE11 strain (BCP, 4.9mg/ml) was obtained when it was grown in GA broth medium containing 3% glutamic acid, 2% glycerol, 0.5% citric acid, 0.5% $NH_4$Cl, 0.05% $MgSO_4.7H_2O,\; 0.05%\;K_2HPO_4\;,\; and\; 0.004%\; FeC1_3. 6H_2O,\; pH 7.2,\; at\; 30^{\circ}C$ for 70 h with shaking. When glycerol was used as an additional carbon source in the GA medium, TE11 produced only flocculant BCP without any by-product. The flocculant (BCP) was found to aggregate suspended kaolin and activated charcoal powder without cations, and its flocculating activity was significantly enhanced by the addition of bivalent cations such as $Ca^{2＋}.Zn^{2},\; and\; Mn^{2＋}$. The flocculation activity by addition of $Ca^{2+}$ was high in an acidic pH 4.0. In the case of $Zn^{2＋}$, high flocculating activity remained without significant loss in the broad range of pH 4.0 to 9.0.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.5
• /
• pp.697-706
• /
• 2018

Lactobacillus pentosus K1-23 was selected from among 25 lactic acid bacterial strains owing to its high inhibitory activity against several pathogenic bacteria, including Escherichia coli, Salmonella typhimurium, S. gallinarum, Staphylococcus aureus, Pseudomonas aeruginosa, Clostridium perfringens, and Listeria monocytogenes. Additionally, among 13 strains of Aureobasidium spp., A. pullulans NRRL 58012 was shown to produce the highest amount of ${\beta}$-glucan ($15.45{\pm}0.07%$) and was selected. Next, the optimal conditions for a solid-phase mixed culture with these two different microorganisms (one bacterium and one yeast) were determined. The optimal inoculum sizes for L. pentosus and A. pullulans were 1% and 5%, respectively. The appropriate inoculation time for L. pentosus K1-23 was 3 days after the inoculation of A. pullulans to initiate fermentation. The addition of 0.5% corn steep powder and 0.1% $FeSO_4$ to the basal medium resulted in the increased production of lactic acid bacterial cells and ${\beta}$-glucan. The following optimal conditions for solid-phase mixed culture were also statistically determined by using the response surface method: $37.84^{\circ}C$, pH 5.25, moisture content of 60.82%, and culture time of 6.08 days for L. pentosus; and $24.11^{\circ}C$, pH 5.65, moisture content of 60.08%, and culture time of 5.71 days for A. pullulans. Using the predicted optimal conditions, the experimental production values of L. pentosus cells and ${\beta}$-glucan were $3.15{\pm}0.10{\times}10^8CFU/g$ and $13.41{\pm}0.04%$, respectively. This mixed culture may function as a highly efficient antibiotic substitute based on the combined action of its anti-pathogenic bacterial and immune-enhancing activities.

• Journal of Nutrition and Health
• /
• v.40 no.5
• /
• pp.403-412
• /
• 2007

This study was designed to examine the effects of Salicornia herbacea L. (glasswort: GW) on the lipid peroxidation and mineral levels in diabetic rats. Diabetes mellitus was induced in male Sprague-Dawley rats weighing 200-220 g by an injection of streptozotocin (STZ) dissolved in a citrate buffer into the tail vein at a dose of 45 mg/kg of body weight. Sprague-Dawley rats were fed an AIN-93 recommended diet and the experimental groups were fed a modified diet containing 10% and 20% of glasswort powder for 4 weeks. The experimental groups were divided into 6 groups which consisted of normal (N)-control group, N-GW 10% and N-GW 20% treated groups, STZ-control, STZ-GW 10% and STZ-GW 20% treated groups. The rats' liver and muscle glycogen, liver and kidney protein, cholesterol and triglyceride (TG) in liver, malondialdehyde (MDA) in liver and kidney values were measured, along with the hepatic of chromium (Cr), iron (Fe), and zinc (Zn) content. The liver glycogen levels was significantly affected in N-GW 20% group among all the experimental groups. The liver MDA levels of the STZ-GW 10% and STZ-GW 20% groups were significantly lower than for the STZ-control group. There were significant differences between the N-control group and the STZ-control group in the hepatic of Zn levels. The hepatic of Cr levels in the N-GW 20% and STZ-GW 10% and STZ-GW 20% groups were significanly higher than for the each control groups. These results exhibited dose related effect of glasswort and it may have favorable influence on lipid peroxidation in the liver.

• Journal of Nutrition and Health
• /
• v.30 no.10
• /
• pp.1211-1218
• /
• 1997

This study was performed to assess the consumption of various seasonings (SNG), which are usually omitted from food frequency questionnaire(FFQ), and their contributions to nutrient intake levels. A dietary survey with FFQ , which surveyed the intake of 65 mainly uncooked food items, was conducted for 493 adults over 30 years of age from 373 households in a rural area of Korea. Household consumption of major SNG items-garlic , red pepper powder, fermented soy bean paste, oil, soy sauce , salt, etc- were estimated by a questionnaire completed by the housewives of the survey participants. The daily consumption of SNG items by each subject was determined by 3 methods ; dividing daily household consumption by \circled1 the number of household members. \circled2 the number of household members over 10 years of age and \circled3 the weighted number of houshold members calculated by the ratio of the RDA for energy. All three methods for calculating the daily personal consumption of seasoning gave similar results, which may have been partly due to the homogenity of family age distribution of the households in the study area. Therefore, the results of method \circled1 were used to determine the contribution of SNG to nutrient intake of subjects in this study. Daily intake of all nutrients were significantly increased by including SNG consumption in the measurements as compared to measuring intake by FFQ alone (p0.01). Percentages of total daily nutrient intake from SNG ranged from 2.3% in carbohydrate to 34.4% in fat. Nutrients with higher contributions from SNG were energy (8.4%), fat (34.4%), Fe(20.55) and $\beta$-carotene(17.9%). These results indicate that SNG consumption can contribute significantly to the intake of several nutrients and must be considered in surveys using FFQ.

• Korean Journal of Materials Research
• /
• v.15 no.3
• /
• pp.177-182
• /
• 2005

Large amounts of the waste SiC sludge containing small amounts of Si and organic lubricant were produced during the wire cutting process of the single silicon crystal ingots. The waste SiC sludge was purified by the washing process and the purified SiC powders were used to fabricate continuously porous $SiC-Si_3N_4$ composites using a fibrous monolithic process, in which carbon, $6wt\%\;Y_2O_3-2\;wt\%\;A1_2O_3$ and ethylene vinyl acetate were added as a pore-forming agent, sintering additives, and binder, respectively. In the burning-out process, carbon was fully removed and continuously porous $SiC-Si_3N_4$ composites were successfully fabricated. The green bodies containing SiC, Si particles and sintering additives were nitrided at $1410^{\circ}C$ in a flowing $N_2+10\%\;H_2$ gas mixture. Continuously porous composites were combined with SiC, ${\alpha}Si_3N_4,\;\beta-Si_3N_4$ and a few $\%$ of Fe phases. The pore size of the 2nd and the 3rd passed $SiC-Si_3N_4$ composites was $260\;{\mu}m$ and $35\;{\mu}m$ in diameter, respectively.