• Journal of the Korean Ceramic Society
• /
• v.45 no.5
• /
• pp.297-302
• /
• 2008

To direct the evolution of nanostructure and immobilize ${\gamma}-Al_2O_3$ catalyst, nanocrystalline La-doped-$Al_2O_3$ powder were prepared by the sol-gel process with addition of an amphiphilic block copolymer template (pluronic P123: $(poly(ethyleneoxide)_{20}-poly(propyleneoxide)_{70}-poly(ethyleneoxide)_{20})$. The dried gel is amorphous, whereas heating at temperature above $700^{\circ}C$ leads to the formation of nanocrystalline ${\gamma}$ and ${\delta}-Al_2O_3$ and these two phases is kept until $1100^{\circ}C$. ${\alpha}-A1_2O_3 $starts to form at $1200^{\circ}C$ with $LaAl_{11}O_{18}$. The surface morphology and crystal structure has been observed by field emission scanning electron microscope (FE-SEM) and X-ray diffraction (XRD). Solid state $^{27}Al$ MAS NMR indicates two types of local environment, i.e. octahedral and tetrahedral sites. The surface area and pore size was compared among these powders using the BET nitrogen adsorption measurements.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.2
• /
• pp.111-114
• /
• 2017

In this research, the development of fabrication technique of bulk YBaCuO superconductors for application was studied. In fluence of $BaZrO_3$ addition on magnetization characteristics of thermal pyrolysis textured YBaCuO superconductor was investigated. Fine $BaZrO_3$ particle were dispersed within the textured YBaCuO matrix by means of the thermal pyrolysis processing. Magnetic levitation force for YBaCuO superconductors were obtained using Nd-B-Fe permanent magnet, at 77 K and at the magnetic field from 0 to 5.3 K gauss. In the unadded superconductor and 5 wt% $BaZrO_3$ addition, anomalous magnetization behavior, which is characterized by the intermediate magnetic field, was observed at 77 K. Critical current density was about few hundreds $A/cm^2$ and the magnetic characteristics increased slightly by addition of $BaZrO_3$ powder. Maximum magnetic force was obtained in the YBaCuO superconducting bulk with 3 wt.% $BaZrO_3$ addition.

• Particle and aerosol research
• /
• v.4 no.2
• /
• pp.51-67
• /
• 2008

In this study, we devoted to kinetic measurement of the catalytic oxidation of iron-containing flame soot particles and better understanding the role of catalytic particles on carbon oxidation in particular at low temperature, targeting on autothermal regeneration of diesel particulate filter by diesel exhaust gas. Carbon-based Fe-containing particles generated by spraying ferrocene-doped diesel fuel in an oxy-hydrogen flame are tested and compared with a commercial carbon black powder for thermogravimetric analysis (TGA), secondary ion mass spectrometry (SIMS), Fourier-transform infrared spectroscopy (FTIR), Induced coupled plasma-Atomic emission spectroscopy (ICP-AES), and High-resolution transmission electron microscopy (HR-TEM). As a result, we found that a small amount of the ferrocene addition led to significant reductions in a on-set temperature and an activation energy of the carbon oxidation as well. An oxygenated surface complex forming at the particle surface could be thought as active species that would be readily consumed in particular at low temperature.

• Journal of the Korean Home Economics Association
• /
• v.41 no.8
• /
• pp.55-62
• /
• 2003

Natural dyes generally fan into two categories; organic dyes coming from animals and plants and inorganic dyes obtained from various minerals such as bengala, loess, ultramarine, prussian blue and etc. The main components of volcanic ash is clay mineral such as kaolinite, illite, quartz. Clay minerals Composing volcanic ash are kaolinite［$Al_4Si_4O_{10}{(OH)_{8}}$］, illite［$K_{X}Al_2(Si,\;Al)_4O_{10}{(OH)}_2$］, quartz［$SiO_2$］, homblende［$Na_{0-1}\;Ca_2{(Mg,\;Fe,\;Al)}_5{(Si,\;Al)}_{8}O_{22}{(OH)}_2$］and etc. And the redish color mainly comes from iron oxide. In this paper, two different classes of dyeing process were tested; dyeing with volcanic ash only and cationic agent pre-treatment followed by dyeing with volcanic ash. The compositions of the volcanic ash powder and the volcanic ash deposited on the cotton knitted fabrics identified by energy dispersive spectrometer and XRD analysis. The major chemical components of volcanic ash deposited on the cotton knitted fabrics were confirmed to be the saicon oxide, iron oxide, and aluminum oxide and etc. According to the analysis by XRD and EDS-SEM, kaolinite, illite and quartz were also identified.

• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.4
• /
• pp.219-224
• /
• 2006

Silver paste with low sintered temperature has been developed in order to apply electronic parts, such as bus electrode, address electrode in PDP (Plasma Display Panel) with large screen area. In this study, nano-sized silver particles with 10-30 nm were synthesized from silver nitrate ($AgNO_3$) solution by chemical reduction method and silver paste with low sintered temperature was prepared by mixing silver nanoparticles, conventional silver powder with the particle size 1.6 um and Pb-free frit. Conductive thick film from silver paste was fabricated by screen printing on alumina substrate. After firing at $540^{\circ}C$, the cross section and surface morphology of the thick films were analyzed by FE-SEM. Also, the sheet resistivity of the fired thick films was measured using the four-point technique.

• Advances in Traditional Medicine
• /
• v.9 no.3
• /
• pp.217-224
• /
• 2009

In this study, four plants grown naturally in Egypt that are usually consumed by pastoral nomads were screened for their total phenolic contents, antioxidative, and anti-$\alpha$-amylase activities. Dried powder of plant's part was extracted in absolute or 70% ethanol. A polar extract of Panicum turgidum (PTPE) had the highest total polyphenol content {92.5 mg gallic acid equivalents (GAE)/g}, followed by an alkaloid extract of Withania somnifera (WSAlk; 77.5 mg GAE/g), and an ethanol extract of Leptadenia pyrotechnica (LPEE; 59.1 mg GAE/g). By employing different assays such as DPPH radical scavenging, reducing power, $Fe^+$ chelating, $H_2O_2$ scavenging and total antioxidant capacity, it was shown that PTPE, WSEE (ethanol extract of W. somnifera), WSAlk and LPEE had promising antioxidant activity, though, their potency varied according to the different tests. WSAlk had the highest level of $\alpha$-amylase inhibition (40.2%) in vitro, followed by WSEE (30.5%). Therefore, it can be concluded that these plants, especially extracts of PTPE, and WSAlk are beneficial to physiological health, and could be used in food and pharmaceutical industries to prepare dietary supplements, functional foods or food preservatives.

• Journal of the Korean Society of Food Culture
• /
• v.18 no.1
• /
• pp.9-16
• /
• 2003

The purpose of this study was to develop the standardized recipe and to analyze the nutrients of stir-fried whip-arm octopus as one of the kind of traditional local foods in Busan. The standardized recipe was developed by using cookbooks, home recipes, and the recipes by commercial food restaurants. The nutrient was analyzed by using an AOAC method. Sensory evaluations were made on nine sensory attributes by a 12-member panel. As the results, the whip-arm octopus was recorded as a food source for health, rejuvenation in Jasanobo. Since early 1900, the stir-fried method has been used for cooking with the ship-arm octopus. The main ingredients were whip-arm octopus, onion, large green onion as the local stir-fried whip-arm octopus in Busan. The ingredients of soup were shrimp, little neck clam, and water. Seasoning sauce was mixed with red pepper powder, soy sauce, sesame oil, chopped garlic, chopped onion, and sugar. The seasoning sauce was fermented for three days. The results of sensory scores were salty seasoning 3.66/5.00, taste 3.75/5.00, thickness 3.84/5.00, and smell 4.09. Nutrient retention per 100g of the stir-fried whip-arm octopus was 67.54kcal, protein 6.43g, fat 1.66g, Ca 28.06mg, Fe 2.56mg, cholesterol 68mg, and taurin 51mg. Fatty acid consists of various unsaturated fatty acids such as linoleic acid(46.24%) and oleic acid(33.67%).

• Food Quality and Culture
• /
• v.3 no.1
• /
• pp.6-10
• /
• 2009

This study examined the effects of adding Pleurotus ostreatus, Agaricus bisporus and Flammulina velutipes on the quality characteristics of cookies and multiple purposes of wheat powders. The water content, crude protein content, mineral content, color value and sensory evaluation of mushroom cookies and multiple purposes of wheat powders were measured. In the case of cookies, the water content was 1.10-1.24% and crude protein content was 8.20-9.80%. General preferences, such as appearance, color, taste and texture, increased when mushroom was added to the cookies, especially flavor, which showed a much higher preference. In the studies where mushroom was added to wheat powders, the water content was 0.57-0.92% and crude protein content was 11.90-12.80%. The addition of mushroom to both of the cookies and multiple purposes of wheat powders resulted in a remarkable increase in the mineral content, especially Fe, K. In addition, an increase in the amount of added mushrooms resulted in an increase in the hunter L and a values; however, this also resulted in a decrease in the b value.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.56.2-56.2
• /
• 2012

Clinically-favored materials for bone regeneration are mainly based on bioceramics due to their chemical similarity to the mineral phase of bone. A successful scaffold in bone regeneration should have a 3D interconnected pore structure with the proper biodegradability, biocompatibility, bioactivity, and mechanical property. The pore architecture and mechanical properties mainly dependent on the fabrication process. Bioceramics scaffolds are fabricated by polymer sponge method, freeze drying, and melt molding process in general. However, these typical processes have some shortcomings in both the structure and interconnectivity of pores and in controlling the mechanical stability. To overcome this limitation, the rapid prototyping (RP) technique have newly proposed. Researchers have suggested RP system in fabricating bioceramics scaffolds for bone tissue regeneration using selective laser sintering, powder printing with an organic binder to form green bodies prior to sintering. Meanwhile, sintering process in high temperature leads to bad cost performance, unexpected crystallization, unstable mechanical property, and low bio-functional performance. The development of RP process without high thermal treatment is especially important to enhance biofunctional performance of scaffold. The purpose of this study is development of new process to fabricate ceramic scaffold at room temperature. The structural properties of the scaffolds were analyzed by XRD, FE-SEM and TEM studies. The biological performance of the scaffolds was also evaluated by monitoring the cellular activity.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.169-176
• /
• 2011

The two-step water splitting thermochemical cycle is composed of the T-R (Thermal Reduction)and W-D (Water Decomposition)steps. The mechanism of this cycle is oxidation-reduction, which produces hydrogen. The reaction temperature necessary for this thermochemical cycle can be achieved by a dish-type solar thermal collector (Inha University, Korea). The purpose of this study is to validate a water splitting device in the field. The device is studied and fabricated by Kodama et al (2010, 2011). The validation results show that the foam device, when loaded with $NiFe_2O_4/m-ZrO_2$powder, was successfully achieved hydrogen production with 9 (10 with a Xe-light solar simulator, 2009, Kodama et al.) repeated cycles under field conditions. Two foam device used in this study were tested for validation before an experiment was performed. The lab scale ferrite-conversion rate was in the range of 24~76%. Two foam devices were designed to for structural stability in this study. In the results of the experiments, the hydrogen percentage of the weight of each foam device was 7.194 and $9.954{\mu}mol\;g^{-1}$ onaverage, and the conversion rates 4.49~29.97 and 2.55~58.83%, respectively.