• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.36-37
• /
• 2016

The main cause of electrical fires are caused due to short circuit and open circuit. This is generates an instantaneous electric arc or spark accompanied with such electric faults. These arcs generate a pressed wire, contact badness, and a weakness in the wire coating etc.. This research proposes a protection circuit to prevent open-phase accident due to contact failure of electromagnetic contactor, tracking arc fault, open-phase within the three-phase electrical control panel which is the most commonly applied in the industry. The proposed circuit also alarms and cuts off of power system when electrical faults occurs. In addition, the proposed circuit is validated by various electric accident simulator.

• 한국지능시스템학회논문지
• /
• 제13권4호
• /
• pp.486-490
• /
• 2003

Software qualify models can predict the risk of faults in the software early enough for cost-effective prevention of problems. This paper introduces a least squares support vector machine (LS-SVM) as a fuzzy regression method for predicting fault ranges in the software under development. This LS-SVM deals with the fuzzy data with crisp inputs and fuzzy output. Predicting the exact number of bugs in software is often not necessary. This LS-SVM can predict the interval that the number of faults of the program at each session falls into with a certain possibility. A case study on software reliability problem is used to illustrate the usefulness of this LS -SVM.

• 한국안전학회지
• /
• 제20권2호
• /
• pp.140-145
• /
• 2005

The PL(Product Liability) Law has been going into effect in Korea since July 2002. Accordingly, a company's responsibility for customers who are damaged by the defect in the product safety has been gradually strict and imposed burden on management. Not only general consumers but also labors who work with machine in the field of production are included in the concept of victim of the PL Law. That is to say, when a worker is damaged by the defect of machine he can institute a PL lawsuit more aggressively, not just get the industrial accident compensation as usual, only if not his own fault but the defect of machine used in the course of production can be demonstrated. This paper intends to present suggestions to PL prevention of manufacturing companies of industrial machine through the case research of PL accidents in the area of industrial safety.

• 한국산업정보학회논문지
• /
• 제22권2호
• /
• pp.15-25
• /
• 2017

A System can be more Dependable from some types of Threats if the Dependability Level Against the Threat on the System is Increased. However, The Dependability-performance Tradeoff should be Considered because the Increased Dependability may Degrade the Performance of the System. Therefore, it is Efficient to Temporally Increase the Dependability Level to High only when an Threat is Predicted on the System in a Short time while Maintaining the Level in Low or mid in Normal Situations. In this Paper, we Present a Threat Prevention Strategy for a Networked Node by Dynamically Changing the Dependability Level According to the Threat Situation on its Logically/physically Neighboring Nodes. As case Studies, we Employ our Strategy to an Internet Server Against TCP SYN Flood Attacks and to a Checkpoint and Rollback System Against Transient Faults. Our Performance Analysis Shows that our Strategy can Effectively Relieve the Damage of the Failure without Serious Performance Degradation.

• 산업경영시스템학회지
• /
• 제25권1호
• /
• pp.49-55
• /
• 2002

For making a lead terminal(condenser, resistor etc.), it is the matter that lead wire have to be supplied smooth without twisting and curving when it is supplied to the further processing (cutting, forming, attach process) after it being forwarded. The purpose of this study is to solve the winding claims of lead wire through the structural expansion of winding equipment to which the improvement of packing equipment to forward safely and supply the lead wire and QFD method are applied. The results of this study is available to solve the technical problem caused by the installation of the existing flyer system for the prevention of twisting and can expect the quality assurance as it prevents the claim(surface fault) caused by the bumping among lead wire which are involved in the packing equipment in its moving stage.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.551-552
• /
• 2009

오늘날 건축시공에 있어 하자발생 가능성이 증가하고 있다. 이에 부실공사 방지를 위해 건설 안전 정책이 시행되고 있지만, 하자 관련 규정이 추상적이고 불확실하게 규정되어 있어 하자와 관련 된 분쟁은 나날이 증가 되고 있다. 이에 본 연구에서는 하자의 유형 및 원인을 분석하고, 이에 대한 하자책임 및 하자담보 책임기간에 대한 분쟁의 합리적 해결책을 제시하기 위하여 관계 전문가들을 대상으로 설문조사를 실시하였다.

• 한국전기전자재료학회논문지
• /
• 제14권7호
• /
• pp.578-583
• /
• 2001

The bushing for high voltage and large and power should endure weight of itself and force of pushing from contact with circuit breaker. Like this, epoxy mold bushing has to be strong without fault. However, the external circumstances and internal factors was caused by partial discharge, flashover and dielectric breakdown. Therefore, to remove external factor of defect and to prevent the internal cracks and cavity generated from the contraction on interface of Cu-Epoxy, we should form semi-conductive layer on Cu bar by carbon. Then, the PD properties and the insulation qualities of epoxy mold type bushing was able to improved by roles of cushions for the direction of diameter and by effects fo natural sliding like as separated from conductor for the direction of length. So, in this work, we could prove the method of semi-conductive layer in making the long conductor.

• Journal of Communications and Networks
• /
• 제16권6호
• /
• pp.667-676
• /
• 2014

Connectivity is a crucial quality of service measure in wireless sensor networks. However, the network is always at risk of being split into several disconnected components owing to the sensor failures caused by various factors. To handle the connectivity problem, this paper introduces an in-advance mechanism to prevent network partitioning in the initial deployment phase. The approach is implemented in a distributed manner, and every node only needs to know local information of its 1-hop neighbors, which makes the approach scalable to large networks. The goal of the proposed mechanism is twofold. First, critical nodes are locally detected by the critical node detection (CND) algorithm based on the concept of maximal simplicial complex, and backups are arranged to tolerate their failures. Second, under a greedy rule, topological holes within the maximal simplicial complex as another potential risk to the network connectivity are patched step by step. Finally, we demonstrate the effectiveness of the proposed algorithm through simulation experiments.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.359-365
• /
• 2001

The conventional SCADA adopted for the electric railway has the mere function of controlling and monitoring the hardware itself. Lack of the functions necessary far the fault prevention and the system recovery requires the operators to depend on their intuition and experience. To make up far these shortcomings of the conventional SCADA, PIS(Power Information System) visually offers integrated information for the optimal operation of the power system by manipulating the raw data acquired from the SCADA. In this paper we have studied the variety of information and its feasibility that can be offered individually by PIS.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(II)
• /
• pp.1019-1026
• /
• 2002

The conventional SCADA being used in the electric railway has the basic functions of remote controlling and system monitoring. Since the SCADA lacks the functions essential to the fault prevention and the system recovery, operators must depend on their intuition and experience to considerable extent. Visually integrated information offered by PIS contributes to the fast system recovery and the state judgment of the power system, and makes a novice be adapted for the operation easily. In this paper, we have studied the various functions and its feasibility that can be offered by PIS.