• 제목/요약/키워드: Fault indicator

검색결과 48건 처리시간 0.028초

e-Navigation 서비스를 위한 충돌사고 평가지표 개발 (Development a Collision Accident Evaluation Indicator for an e-Navigation Service)

  • 김정호;배석한;장은규
    • 해양환경안전학회지
    • /
    • 제27권1호
    • /
    • pp.1-12
    • /
    • 2021
  • IMO에서는 선박운항기술에 ICT기술을 융합하여 해양사고를 예방하는 e-Navigation의 도입을 추진하고 있다. 국내에서도 해양사고의 취약계층인 어선 및 연안을 항해하는 소형선박을 대상으로 한국형 e-Navigation을 개발하고 있다. 그러나 한국형 e-Navigation의 성공적인 개발을 위해서는 현재까지 진행된 개발성과를 평가하고 개발 방향성을 재정립할 수 있도록 개발성과를 평가할 수 있는 지표의 개발이 필요하다. 따라서 본 연구에서는 주요한 해양사고인 충돌사고를 중심으로 e-Navigation 서비스의 개발목표에 맞춘 평가지표를 개발하고자 하였다. 본 연구에서는 RCA기법과 FTA 기법을 활용해 해상 충돌사고 발생 근본원인을 도출하고 이를 정량화하여 e-Navigation 서비스를 위한 충돌사고 평가지표를 개발하였다. 해당지표는 e-Navigation의 개발지표 및 충돌사고 분석을 위한 지표로 활용되어 해양사고 저감에 도움이 될 것으로 사료된다.

굴절파 GRM 해석방법을 응용한 고경사 단층 인지 (Ⅱ) -실제 자료 적용- (Identification of high-dip faults utilizing the GRM technique of seismic refraction method(Ⅱ) -Application to real data-)

  • 김기영;우남철
    • 지구물리
    • /
    • 제2권1호
    • /
    • pp.65-74
    • /
    • 1999
  • 양산단층이 통과하는 언양 부근에서 기록한 굴절파 4개 측선자료를 대상으로 구배변화 지시자를 구하고 단층 분포상태를 해석하였다. XY=3 m인 속도분석 함수를 이용하여 구한 대상 굴절면의 평균속도는 2,250-2,870 m/s 정도이며, 가장 서쪽에 위치한 측선 1은 다른 측선보다 굴절파 속도가 약 600 m/s 정도 작게 나타난다. XY값이 6 m와 0 m인 속도분석 함수의 차이를 이용하여 구한 구배변화 지시자의 진폭이 0.5 ms/m 이상인 곳은 고해상도 반사파 단면상에 해석된 단층위치와 대체로 일치하며, 전반적으로 한 개의 측점간격(3 m) 정도 벗어난 양상을 보인다. 진폭이 큰 구배변화 지시자는 35번 국도를 중심으로 밀집되어 나타나며, 가장 큰 단층은 지질도상의 예상단층선에서 약 930 m 서쪽에 위치하는 것으로 해석된다.

  • PDF

A Particle Filtering Approach for On-Line Failure Prognosis in a Planetary Carrier Plate

  • Orchard, Marcos E.;Vachtsevanos, George J.
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • 제7권4호
    • /
    • pp.221-227
    • /
    • 2007
  • This paper introduces an on-line particle-filtering-based framework for failure prognosis in nonlinear, non-Gaussian systems. This framework uses a nonlinear state-space model of the plant(with unknown time-varying parameters) and a particle filtering(PF) algorithm to estimate the probability density function(pdf) of the state in real-time. The state pdf estimate is then used to predict the evolution in time of the fault indicator, obtaining as a result the pdf of the remaining useful life(RUL) for the faulty subsystem. This approach provides information about the precision and accuracy of long-term predictions, RUL expectations, and 95% confidence intervals for the condition under study. Data from a seeded fault test for a UH-60 planetary carrier plate are used to validate the proposed methodology.

비접지 계통 배전자동화 시스템에서 지락사고 시 FI 검출 알고리즘 (A Fault Indicator Detecting Algorithm on Single-Phase-to-Ground fault in Ungrounded System)

  • 임희택;임일형;최면송;이승재;하복남
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 제39회 하계학술대회
    • /
    • pp.155-156
    • /
    • 2008
  • 비접지 계통에서 대부분의 고장은 1선 지락 고장이며 1선 지락 고장 시 고장 전류의 크기가 매우 작기 때문에 고장 검출에 어려움이 있다. 본 논문에서는 영상전류를 이용하여 새로운 FI 검출 알고리즘을 제안한다. 제안된 알고리즘은 선간전압과 영상전류만을 이용하여 단말에서 고장회선, 고장상, 고장구간을 한 번에 판별하여 FI를 검출한다. 제안된 알고리즘은 Matlab/Simulilnk를 통해 계통을 모의하여 검증하였다.

  • PDF

Extension of ReInForM Protocol for (m,k)-firm Real-time Streams in Wireless Sensor Networks

  • Li, Bijun;Kim, Ki-Il
    • Journal of information and communication convergence engineering
    • /
    • 제10권3호
    • /
    • pp.231-236
    • /
    • 2012
  • For real-time wireless sensor network applications, it is essential to provide different levels of quality of service (QoS) such as reliability, low latency, and fault-tolerant traffic control. To meet these requirements, an (m,k)-firm based real-time routing protocol has been proposed in our prior work, including a novel local transmission status indicator called local DBP (L_DBP). In this paper, a fault recovery scheme for (m,k)-firm real-time streams is proposed to improve the performance of our prior work, by contributing a delay-aware forwarding candidates selection algorithm for providing restricted redundancy of packets on multipath with bounded delay in case of transmission failure. Each node can utilize the evaluated stream DBP (G_DBP) and L_DBP values as well as the deadline information of packets to dynamically define the forwarding candidate set. Simulation results show that for real-time service, it is possible to achieve both reliability and timeliness in the fault recovery process, which consequently avoids dynamic failure and guarantees meeting the end-to-end QoS requirement.

전류신호 분석을 통한 저널베어링 이상상태 진단 (Diagnosis of a Journal Bearing Fault via Current Signature Analysis)

  • 박진석;허형;정경훈;이규만;박근배
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 추계학술대회논문집
    • /
    • pp.119-122
    • /
    • 2005
  • A study on motor current signature analysis has been executed for monitoring the fault of journal bearing due to wear. The air gap eccentricity of motor produces specific frequencies in motor current, the supplied current frequency plus and minus rotational rotor frequency. The air gap eccentricity is simulated by the clearance of Journal bearing. The amplitudes of the specific frequencies increase with the increasing clearances. The amplitudes of the specific frequencies continue to increase over the wear limit that is used in the manufacturer of the test motor. Though clear relations between the amplitudes of the specific frequencies and the clearances are not obtained in this paper, the specific frequencies can be used as an indicator of a journal bearing fault. Further study is necessary to make out the quantitative relations between the specific frequencies and the clearances.

  • PDF

배전자동화시스템의 효율적인 운용을 위한 구가기능 및 정보전송체계 (The Additional Functions and Data Transmission Flow Diagram for Effective Operation of Distribution Automation System)

  • 이중호;하복남;조남훈
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
    • /
    • pp.211-213
    • /
    • 1998
  • This paper introduces the additional remote monitoring and remote setting functions needed to operate the distribution automation system effectively. we compare the additional functions with the old functions. The remote setting of minimum trip value of fault indicator is an example of additional function. It saves time and line-man's power. Also this paper describes the data transmission flow diagram for operation of distribution automation system using wireless communication method.

  • PDF

굴절파 GRM 해석방법을 응용한 고경사 단층 인지(Ⅰ) - 컴퓨터 모델링 연구 - (Identification of high-dip faults utilizing the GRM technique of seismic refraction method(Ⅰ) - Computer modeling -)

  • 김기영
    • 지구물리
    • /
    • 제2권1호
    • /
    • pp.57-64
    • /
    • 1999
  • 지표 부근의 수직변위 단층을 굴절파 자료로부터 신속하게 인지하기 위한 효과적 방법을 모색하기 위하여, 컴퓨터 모델링을 통하여 GRM 해석법의 특성을 분석하였다. 속도분석 함수가 수진점 사이 거리인 XY값에 따라 단층 부근에서 형태가 변하는 특성을 이용하여, XY값이 적정값보다 큰 경우와 작은 경우의 속도분석 함수값의 차이를 수평 1차 미분하여 구한 함수를 구하였으며 ''구배변화 지시자''로 명명하였다. 굴절면 경사가 작을수록, XY값의 차이가 클수록 구배변화 지시자의 최대치 진폭이 증가하고 진동거리가 짧아져 단층의 위치를 정확하게 지시하는 것으로 분석된다. 이러한 특성을 갖는 구배변화 지시자는 굴절법으로 얻어진 탄성파 자료를 이용하여 지표 근처의 고경사 단층 위치 및 분포 상태를 파악하는데 효과적으로 사용될 수 있을 것으로 기대된다.

  • PDF

정적 상태의 이동체 위치 정밀도 향상을 위한 오류 검출 및 배제 기법 (Precision Positioning of a Stationary Transporter Using a Fault Detection and Isolation Method)

  • 안종우;김윤기;이재경;이장명
    • 제어로봇시스템학회논문지
    • /
    • 제22권10호
    • /
    • pp.859-868
    • /
    • 2016
  • This paper proposes a new global positioning system (GPS) receiver algorithm to improve the positioning accuracy of a transporter using fault detection and isolation techniques from satellite signals. To improve the positioning accuracy, several factors including a feasible number of satellite signals, SNR, NAV Measurement Quality Indicator (mesQI), and Doppler, among others, have been utilized in the proposed algorithm. To increase the number of feasible satellite signals, an erroneous satellite signal has been replaced by the previous one. In conventional approaches, received GPS signals are analyzed and directly determined to be contaminated or not. The only clean signals are utilized for identifying the current location. This fault detection and isolation (FDI) feasibility test is popular for commercial GPS receivers. In the urban environment, especially near a building, the feasible number of satellite signals becomes insufficient to position the transporter. To overcome this problem, satellite signals are efficiently selected and recovered. Additionally, using the proposed GPS receiver algorithm, a feasible number of satellite signals can be increased, thereby improving the positional accuracy. Real world experiments using a transporter that carries blocks in a shipyard have demonstrated the superiority of the proposed algorithm compared to conventional approaches.

배전계통에서 변압기 결선에 의한 역 조류현상에 관한 연구 (A Study on the Reverse-Power-Flow Phenomenon due to Transformer Wiring Types in Distribution System)

  • 신동열;하복남;정원욱;차한주
    • 조명전기설비학회논문지
    • /
    • 제22권9호
    • /
    • pp.111-119
    • /
    • 2008
  • 본 논문에서는 최근 분산전원 확대보급에 따라 계량오차 발생, 변전소 CB 또는 Recloser, 수전설비 VCB의 OCGR 오동작, 배전자동화 시스템 거짓FI 정보발생 등 한전 배전계통에서 발생되는 오동작 현상에 대해서 원인분석을 수행하였고 그 원인은 변압기 결선에 의한 역 조류현상임을 규명하였다. 이러한 역 조류현상의 영향으로 배전계통의 3상 기본파 전류가 N상에서 동상이 되어 3배의 전류로 합산되었으며, 이 현상을 근거로 새로운 계통해석 방법을 제시하였다. 새로운 계통해석 방법을 적용하여 구간별 고장전류를 해석하였고, 역 조류현상 규명을 위해 변압기 결선형태 별로 역 조류 발생여부를 실험하였다. 또한 PSCAD/EMTDC로 실제 계통을 모의함으로써 역 조류에 의한 오동작 현상을 줄이기 위한 방법으로 중성선의 영상임피던스를 조절하는 방법을 제시하였다.