• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.555-558
• /
• 2003

When a fault relating to the urgent alarm occurs, we must prevent control rods from dropping and make one of two grippers in Control Rod Drive Mechanism (CRDM) grip the drive rod laking a control rod assembly. If a gripper with any problem is ordered to grip the drive rod, the gripper which cannot latch the rod stably will fail to take the rod. On the purpose of escaping this bad case, we order two grippers to hold the drive rod and enhance the reliability of holding control rods. This action is called the double hold. In the middle of the movement of the drive rod, the latching of the drive rod can cause friction between a gripper and the drive rod. This state may give damage to both the gripper and the drive rod. In this paper, we have devised the method which can have two grippers hold the drive rod more stably, without damaging the equipment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1333-1341
• /
• 2010

The goal of this research is to enhance the maintenance and monitoring system of ship environment using sensor network. It is important to know the location information of sensor nodes to control the sensors and to obtain the sensor data from sensor network inside the ship. In this paper, we address the grouping and routing mechanism according to the relative distance of sensor nodes, based on LEACH and PEGASIS. We also consider the fault tolerant mechanism using the location information of sensor nodes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1445-1449
• /
• 2005

The ram assembly is important equipment in fueling machine of PHWR(Pressurized Heavy Water Reactor) plant where fuel replacement is possible while the plant is in service. Troubles in the ram assembly can cause lots of difficulties in power plant operation. The ram assembly is typically composed of the B-ram, the L-Ram and the C-Ram. The B-ram is focused in this paper because it plays the most important role in the ram assembly. Among the ram fault phenomena, ram stuck phenomena are the most frequent cases in the B-ram, which has a ball screw mechanism driven by a hydraulic motor. Ram stuck phenomena are due to ball wear and damage in ball nut that increase in proportion to the number of fuel replacement. It is required to predict ram stuck phenomena before they occur. In this paper, a method is proposed for predicting ram stuck phenomena using a discrete wavelet transform. The discrete wavelet transform provides information on both the time and frequency characteristics of the input signals. The proposed method uses the frequency bandwidths of coefficients of discrete wavelet decompositions and detail coefficients of discrete wavelet transform to predict ram stuck phenomena. The signal used in this paper is a torque-related signal such as a hydraulic service outlet pressure signal in a hydraulic driving system or a current signal in a DC motor driving system. Finally, the validity of the proposed method is shown via experiment using ball nut characteristic test equipment that simulates ram stuck phenomena due to increased ball friction in ball nut.

• Smart Structures and Systems
• /
• v.26 no.2
• /
• pp.195-211
• /
• 2020

Among anti-seismic technologies, base isolation is a very effective means of mitigating damage to structural and nonstructural components, such as equipment. However, most seismic isolation systems are designed for mitigating only horizontal seismic responses because the realization of a vertical isolation system (VIS) is difficult. The difficulty is primarily due to conflicting isolation stiffness demands in the static and dynamic states for a VIS, which requires sufficient rigidity to support the self-weight of the isolated object in the static state, but sufficient flexibility to lengthen the isolation period and uncouple the ground motion in the dynamic state. To overcome this problem, a semi-active VIS, called the piezoelectric inertia-type vertical isolation system (PIVIS), is proposed in this study. PIVIS is composed of a piezoelectric friction damper (PFD) and a leverage mechanism with a counterweight. The counterweight provides an uplifting force in the static state and an extra inertial force in the dynamic state; therefore, the effective vertical stiffness of PIVIS is higher in the static state and lower in the dynamic state. The PFD provides a controllable friction force for PIVIS to further prevent its excessive displacement. For experimental verification, a shaking table test was conducted on a prototype PIVIS controlled by a simple controller. The experimental results well agree with the theoretical results. To further investigate the isolation performance of PIVIS, the seismic responses of PIVIS were simulated numerically by considering 14 vertical ground motions with different characteristics. The responses of PIVIS were compared with those of a traditional VIS and a passive system (PIVIS without control). The numerical results demonstrate that compared with the traditional and passive systems, PIVIS can effectively suppress isolation displacement in all kinds of earthquake with various peak ground accelerations and frequency content while maintaining its isolation efficiency. The proposed system is particularly effective for near-fault earthquakes with long-period components, for which it prevents resonant-like motion.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.1
• /
• pp.1-10
• /
• 1999

A mobile computing environment is one that support user's mobility through the wireless communication technology. Users access the database and get results what they want by running mobile transactions. To run the mobile transaction correctly and to maintain the consistency I database, we need a concurrency control method to schedule transactions, a caching method to manage the cache, and a recovery method to construct a fault tolerant system. A mobile computing system is based on the existing distributed system, but we can't use recovery methods of the existing distributed system directly because of the user's mobility and the features of wireless media. So this paper presents a recovery mechanism to construct a fault tolerant mobile computing systems. Especially. we develop and analyze a recovery algorithm for server failure among types of failure which can arise in mobile computing environments.

• Journal of Korean Association for Spatial Structures
• /
• v.9 no.1
• /
• pp.69-78
• /
• 2009

Recent earthquake, such as the Northridge(1994), the Kobe(1995) and the Izmit(1990) earthquakes, gave serious damage in various buildings and bridges by the vertical seismic component. Most of the seismic designs neglect the vertical seismic component for usual frame structures. The purpose of this study is to evaluate the effects of the vertical seismic component and to compare the axial force of columns and plastic rotation angle of the analytical models in these effects. The vertical seismic component produced a large increment of axial force in columns. And the vertical seismic component caused a significant increase of the damage in the columns. As analysis result, increase of axial force cause the damage of columns and give possibility of story collapse mechanism of the structure system. Therefore, area that near fault ground motion is expected may be consider the effect of vertical component of seismic ground motions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7C
• /
• pp.677-684
• /
• 2002

Today's Internet does not have efficient traffic engineering mechanism to support QoS for the explosive increasing internet traffic such as various multimedia traffic. This functional shortage degrades prominently the quality of service, and makes it difficult to provide multi-media service and real-time service. Various technologies are under developed to solve these problems. IETF (Internet Engineering Task Force) developed the MPLS (Multi-Protocol Label Switching) technology that provides a good capabilities of traffic engineering and is independent layer 2 protocol, so MPLS is expected to be used in the Internet backbone network$\^$[1][2]/. The faults occurring in high-speed network such as MPLS, may cause massive data loss and degrade quality of service. So fast network restoration function is essential requirement. Because MPLS is independent to layer 2 protocol, the fault detection and reporting mechanism for restoration should also be independent to layer 2 protocol. In this paper, we present the experimental results of the MPLS OAM function for the performance monitoring and fault detection 'll'&'ll' notification, localization in MPLS network, based on the OPNET network simulator

• Journal of KIISE:Databases
• /
• v.32 no.6
• /
• pp.616-627
• /
• 2005

In the shared storage file system, systems can directly access the shared storage device through specialized data-only subnetwork unlike in the network attached file server system. In this shared-storage architecture, data consistency is maintained by some designated set of lock servers which use control network to send and receive the lock information. Furthermore, lease mechanism is introduced to cope with the control network failure. But when the control network is partitioned, participating systems can no longer make progress after the lease term expires until the network recovers. This paper addresses this limitation and proposes a method that allows partitioned systems to make progress under the partition of control network. The proposed method works in a manner that each participating system is rotationally given a predefined lease term periodically. It is also shown that the proposed mechanism always preserves data consistency.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.980-987
• /
• 2012

Nonpoint source pollution causes leaks and overtopping, depending on the state of the sewer network as well as aggravates the pollution load of the aqueous water system as it is introduced into the sewer by wash-off. According, the need for efficient sewer monitoring system which can manage the sewage flowrate, water quality, inflow/infiltration and overflow has increased for sewer maintenance and the prevention of environmental pollution. However, the sewer monitoring is not easy since the sewer network is built in underground with the complex nature of its structure and connections. Sewer decontamination mechanism as well as pipe network monitoring and fault diagnosis of water network system on system analysis proposed in this study. First, the pollution removal pattern and behavior of contaminants in the sewer pipe network is analyzed by using sewer process simulation program, stormwater & wastewater management model for expert (XP-SWMM). Second, the sewer network fault diagnosis was performed using the multivariate statistical monitoring to monitor water quality in the sewer and detect the sewer leakage and burst. Sewer decontamination mechanism analysis with static and dynamic state system results showed that loads of total nitrogen (TN) and total phosphorous (TP) during rainfall are greatly increased than non-rainfall, which will aggravate the pollution load of the water system. Accordingly, the sewer outflow in pipe network is analyzed due to the increased flow and inflow of pollutant concentration caused by rainfall. The proposed sewer network monitoring and fault diagnosis technique can be used effectively for the nonpoint source pollution management of the urban watershed as well as continuous monitoring system.

• Geophysics and Geophysical Exploration
• /
• v.15 no.2
• /
• pp.85-91
• /
• 2012

Multiple Lapse Time Window (MLTW) analysis for obtaining intrinsic attenuation value require numerous data without directional bias to compensate focal mechanism. The first window of MLTW, therefore, shows large deviation in fitting smoothed theoretical curve. The information on the focal mechanism may reduce burdens of number and distribution. This study combined algorithm of computing focal mechanism to DSMC method by Yoshimoto (2000). However, the MLTW method based on the numerous data was not applicable to this study, because of the limited data to the almost same fault plane solution. This study showed that the available data was too insufficient to construct smoothed theoretical curve, although the deviation of the first window was improved. Instead of conventional solution by more data, the study seems to be needed for new constraints to obtain smoothed curve.