• 한국자원식물학회지
• /
• 제26권5호
• /
• pp.628-635
• /
• 2013

국내에 자생하는 기름생산이 가능한 목본식물의 바이오디젤 원료로서의 이용가능성을 구명하기 위해 기름함량, 지방산 조성 및 전이에스테르화를 통해 생산된 바이오디젤의 특성분석을 실시하였다. 목본 기름식물의 종자 내 기름함량은 15.1 ~ 70.3%로 다양하였으며, 지방산조성은 주로 올레산, 리놀레산, 리놀렌산, 팔미트산 및 스테아르산 등 이였으며 올레산의 함량이 가장 높았고 모든 식물에서 불포화지방산이 포화지방산보다 많았다. 지방산메틸에스테르의 산화안정성은 2.25 ~ 8.62 hours/$110^{\circ}C$로 나타났고, 요오드가는 때죽나무 기름이 가장 높았으며 이는 불포화지방산의 함량이 다른 식물 종보다 높기 때문이다. 저온 필터막힘점은 $0^{\circ}C$ to $-13^{\circ}C$로 다양하게 나타났으며 이팝나무 지방산메틸에스테르가 저온유동성이 가장 우수하였다. 기름함량, 지방산조성, 바이오디젤 특성 등을 종합하였을 때 동백나무, 이팝나무 및 때죽나무의 종자에서 추출한 기름이 바이오디젤로의 이용 가능성이 비교적 높은 것으로 생각된다.

• 한국응용과학기술학회지
• /
• 제22권2호
• /
• pp.106-115
• /
• 2005

Bio-diesel as fatty acid methyl ester was derived from such oils as soybean, peanut and canola oil by lipase catalyzed continuous trans-esterification. So the activation of lipase(Novozym - 435) was kept to be up to 4:1, the limiting molar ratio of methanol to oil under one-step addition of methanol due to the miscibility of oil and methanol through the static mixer for 4hrs and the elimination of glycerol on the surface of lipase by 7wt% silica gel. Therefore the overall yield of fatty acid methyl ester from soybean oil appeared to be 98% at 50$^{\cdot}C$ of reaction temperature under two-steps addition of methanol with 2${\times}$2:1 of methanol to oil molar ratio at an interval of 5.5hrs, 7wt% of lipase, 24 number of mixer elements, 0.2ml/min of flow rate and 7wt% of silica gel.

• 멤브레인
• /
• 제20권2호
• /
• pp.113-119
• /
• 2010

카놀라유, 대두유, 자트로파유와 메탄올을 연속적으로 분리막 반응기에 순환시켜 바이오디젤을 제조하였다. 분리막은 반응기 역할과 반응 생성물로부터 미반응된 유지를 분리하여 고순도의 fatty acid methyl ester (FAME)를 생산하는 역할을 한다. 공칭 세공크기 0.2, 0.5 ${\mu}m$인 정밀여과형 세라믹 관형 분리막을 사용하였다. 운전압력 0.5 bar에서 0.2 ${\mu}m$ 정밀여과막에 대한 투과유속은 공급유량 400 mL/min일 경우 15 L/$m^2{\cdot}hr$이었다. 또한 투과액중 FAME 함량은 0.5 bar에서 가장 높았으며 운전압력이 증가할수록 감소하였다.

• ALGAE
• /
• 제30권1호
• /
• pp.67-79
• /
• 2015

Planktivorous fish which limit zooplankton grazing have been predicted to increase algal biodiesel production in wastewater fed open reactors. In addition, tanks with higher algal diversity have been predicted to be more stable, more productive, and to more fully remove nutrients from wastewater. To test these predictions, we conducted a 14-week experiment in Houston, TX using twelve 2,270-L open tanks continuously supplied with wastewater. Tanks received algal composition (monocultures or diverse assemblage) and trophic (fish or no fish) treatments in a full-factorial design. Monocultures produced more algal and fatty acid methyl ester (FAME) mass than diverse tanks. More than 80% of lipids were converted to FAME indicating potentially high production for conversion to biodiesel (up to $0.9T\;ha^{-1}y^{-1}$). Prolific algal growth lowered temperature and levels of total dissolved solids in the tanks and increased pH and dissolved oxygen compared to supply water. Algae in the tanks removed 91% of nitrate-N and 53% of phosphorus from wastewater. Monocultures were not invaded by other algal species. Fish did not affect any variables. Our results indicated that algae can be grown in open tank bioreactors using wastewater as a nutrient source. The stable productivity of monocultures suggests that this may be a viable production method to procure algal biomass for biodiesel production.

• Journal of Biosystems Engineering
• /
• 제37권6호
• /
• pp.429-433
• /
• 2012

Purpose: While rapeseed oil, soy bean oil, palm oil and waste cooking oil are being used for biodiesel, the viscosity of them should be lowered for fuel. The most widely used method of decreasing the viscosity of vegetable oil is to convert the vegetable oil into fatty acid methyl ester but is too expensive. This experiment uses ultrasonic energy, instead of converting the vegetable oil into fatty acid methyl ester, to lower the viscosity of the waste cooking oil. Methods: For irradiation treatment, the sample in a beaker was irradiated with ultrasonic energy and the viscosity and temperature were measured with a viscometer. For heating treatment, the sample in a beaker was heated and the viscosity and temperature were measured with a viscometer. Kinematic viscosity was calculated by dividing absolute viscosity with density. Results: The kinematic viscosity of waste cooking oil and cooking oil are up to ten times as high as that of light oil at room temperature. However, the difference of two types of oil decreased by four times as the temperature increased over $83^{\circ}C$. When the viscosity by the treatment of ultrasonic energy irradiation was compared to one by the heating treatment to the waste cooking oil, the viscosity by the treatment of ultrasonic energy irradiation was lower by maximum of 22% and minimum of 12%, than one by the heating treatment. Conclusions: Ultrasonic energy irradiation lowered the viscosity more than the heating treatment did, and ultrasonic energy irradiation has an enormous effect on fuel reforming.

• 미생물학회지
• /
• 제38권3호
• /
• pp.162-167
• /
• 2002

항진균 활성 관련 단백질을 찾기 위해 미역류로부터 Streptomyces sp. SAR01을 분리하고, FAME (fatty acid methyl ester)분석으로 동정하였다. 감마선(sup $({60}^Co)$)조사를 이용하여 항진균 활성 결핍 돌연변이체(SAR535)를 유도한 후, 이차원전기영동으로 단백질을 분석한 결과 SAR01에만 존재하는 6종의 단백질을 확인할 수 있었다. 이중 10 kDa chaperonin cpn10 (GroES)과 96%의 상동성을 가진 10 kDa의 단백질을 클로닝하였으며, E. coli Ml5에서 과대 발현됨을 확인하였다. 또한 SAR535에 형질전환시킨 결과 SAR01과 유사한 항진균 활성이 나타났다. 이것으로 볼 때 groES는 Streptomyces sp. SAR01의 항진균 활성에 관련된 것으로 사료된다.

• Journal of Microbiology and Biotechnology
• /
• 제26권9호
• /
• pp.1579-1585
• /
• 2016

Sugar esters are valuable compounds composed of various sugars and fatty acids that can be used as antibacterial agents and emulsifiers in toothpaste and canned foods. For example, fructose fatty acid esters suppress growth of Streptococcus mutans, a typical pathogenic bacterium causing dental caries. In this study, fructose laurate ester was chosen as a target material and was synthesized by a transesterification reaction using Candida antarctica lipase B. We performed a solvent screening experiment and found that a t-butanol/dimethyl sulfoxide mixture was the best solvent to dissolve fructose and methyl laurate. Fructose laurate was synthesized by transesterification of fructose (100 mM) with methyl laurate (30 mM) in t-butanol containing 20% dimethyl sulfoxide. The conversion yield was about 90%, which was calculated based on the quantity of methyl laurate using high-performance liquid chromatography. Fructose monolaurate (M_r 361) was detected in the reaction mixture by high-resolution mass spectrometry. The inhibitory effect of fructose laurate on growth of oral or food spoilage microorganisms, including S. mutans, Bacillus coagulans, and Geobacillus stearothermophilus, was evaluated.

• 대한방사성의약품학회지
• /
• 제4권2호
• /
• pp.57-64
• /
• 2018

${\omega}-[^{18}F]$-Fluorohexadecanoic acid (FHA) has been used for imaging of fatty acid metabolism of myocardium. To increase retention of radiolabeled fatty acid by blocking ${\beta}$-oxidation, methyl branched analogues have been used. In this experiment, we tried to synthesize 18F-labeled ${\alpha}-$, ${\beta}-$ and ${\omega}-FHA$ for imaging of the myocardial fatty acid metabolism. We synthesized ${\alpha}-$, ${\beta}-$ and ${\omega}$-mesylated methyl hexadecanoates and labeled with $^{18}F$ by reacting with $[^{18}F]$TBAF in acetonitrile at $80^{\circ}C$ for 10 min. Methyl ester group was removed by 1 M NaOH at $80^{\circ}C$ for 5 min. The yields of ${\alpha}-[^{18}F]$ and ${\omega}-[^{18}F]FHA$ were 25.5 and 45.5%, respectively [EOS]. However, ${\beta}-[^{18}F]FHA$ was not labeled at all due to a fast elimination reaction. The biodistribution study in ICR-mice showed that ${\omega}-[^{18}F]FHA$ has higher myocardial uptake and lower liver uptake than ${\alpha}-[^{18}F]FHA$. The electron-withdrawing effect of fluorine at ${\alpha}-$ position is believed to be the major factor affecting the biodistribution.

• Archives of Pharmacal Research
• /
• 제18권4호
• /
• pp.224-230
• /
• 1995

Recently, many attempts have been made to use hydrogels of various polymers as delivery systems of various drugs and bioactive materials to prolong and control their phamacological activities. In this study, we have evaluated the physico-chemical properties of methacrylic acid-methyacrylic acid methyl ester copolymer 9Eudispert mv)m a acrylic resin hydorgel, and its application to transdermal delivery system. In the dissolution tests, the release rate of salicylic acid (SA) and sodium salicylate (SOd. SA) were faster than lidocain (LD) and lidocain-HCl(LD-HCl). As the concentration of Eudispert mv polymer increased, the extensibility of Eudispert mu hydrogel decreased, whereas the swelling ratio increased. The more NaOH and polymer concentration increased, the more osmotic pressure linearly increased. The skin permeation of Sod. SA, an acidic model drug, was remarkably enhanced by Eudispert mv hydrogel. All fatty acids, except for Sod. glycolate, dramatically increased the skin permeation flux in Eudispert mu hydrogel containing LD-Hcl, a basic model drug. Consequently, it is suggested that Eudispert mv hydrogel may be used as potential transdermal delivery vehicle.

• Mass Spectrometry Letters
• /
• 제4권4호
• /
• pp.75-78
• /
• 2013

A gas chromatography/mass spectrometric (GC/MS) method was developed as a candidate reference method for the accurate determination of essential fatty acids (linoleic acid, ${\alpha}$- and ${\gamma}$-linolenic acids) in food supplemental oil products. Samples were spiked with three internal standards (stearic acid-$d_{35}$, $^{13}C_{18}$-linoleic acid, and $^{13}C_{18}$-${\alpha}$-linolenic acid). Samples were then subject to saponification, derivatization for methylation, and extraction by organic solvent. For GC/MS measurement, an Agilent HP-88 column, designed for the separation of fatty acid methyl esters, was selected after comparing with other columns as it provided better separation for target analytes. Target analytes and internal standards were detected by selected ion monitoring of molecular ions of their methyl ester forms. The GC/MS method was applied for the measurement of three botanical oils in NIST SRM 3274 (borage oil, evening primrose oil, and flax oil), and measurement results agreed with the certified values. Measurement results for target analytes which have corresponding isotope-labeled analogues as internal standard were calculated based on isotope dilution mass spectrometry (IDMS) approach, and compared with results calculated by using the other two internal standards. Results from the IDMS approach and the typical internal standard approach were in good agreement within their measurement uncertainties. It proves that the developed GC/MS method can provide similar metrological quality with IDMS methods for the measurement of fatty acids in natural oil samples if a proper fatty acid is used as an internal standard.