• The Korean Journal of Emergency Medical Services
• /
• v.12 no.3
• /
• pp.71-86
• /
• 2008

Purpose : This study was to examine the influence of job stress of 119 Emergency Medical Technician on fatigue and job satisfaction. Methods : Subjects of this study were 228 Emergency Medical Technicians who worked at 119 Safety Center of total 92 fire stations in 12 cities of Gyeonggido including U, N, H, B, A, S, Y, G, G, G, P and I and the period of data collection was from July 11 to Sep. 10, 2007. Collected data were analyzed with SPSS 14.0 version. Results : Conclusions of this study were as follows. 1) Factor related to organization among job stress factors had the greatest influence on fatigue (B = 0.334, p < 0.01), followed by crisis situation factor (B = 0.2042, p < 0.01), inappropriate treatment factor (B = 0.174, p < 0.05), role conflict factor as special job (B = 0.109, p < 0.05) and professional knowledge and technique factor (B = 0.109, p < 0.05), and the influence of job stress factors on fatigue was explained as $R^2=0.340$. 2) Mental burden factor of job stress factors had the greatest influence on job satisfaction (B = -0.606, p < 0.01), followed by organization factor (B = -0.473, p < 0.01) and interpersonal relation and conflict factor (B = -0.339, p < 0.01), and the influence of job stress factor on fatigue was explained as $R^2=0.308$. Conclusions : Job stress of 119 rescuer is increasing continuously and such an accumulated stress lowers the job efficiency. In order to reduce, job stress, it is important to extend(${\rightarrow}$ have) proper self-development, maintain close relationships and mutual correlations among members of organization in personal dimension and to solve the role conflicts, define the organizational roles and simplify excessive job description into concrete work.

• Structural Engineering and Mechanics
• /
• v.70 no.1
• /
• pp.33-41
• /
• 2019

The influence of two parameters on fatigue damage predictions of a variably loaded cantilever beam has been examined. The first parameter is the geometry of the cantilever beam and the weld connecting it to a rear panel. Variables of the geometry examined here include the cantilever length, the weld width on the critical cross-section and the angle of the critical cross-section. The second parameter is the safety factor, as set out by the Eurocode 3 standard. An analytical approach has been used to calculate the stresses at the critical cross-section and standard rainflow counting has been used for the extraction of the load cycles from the load history. The results here suggest that a change in the width and angle of the critical cross-section has a non-linear impact on the fatigue damage. The results also show that the angle of the critical cross-section has the biggest influence on the fatigue damage and can cause the weld to withstand fatigue better. The second parameter, the safety factor, is shown to have a significant effect on the fatigue damage calculation, whereby a slight increase in the endurance safety factor can cause the calculated fatigue damage to increase considerably.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.12
• /
• pp.3227-3235
• /
• 1994

This paper deals with an evaluation of the residual stress due to shot peening induced in a carburized gear tooth and its application to the fatigue crack propagation problem. A practical method is proposed on the basis of the assumption that the residual stress is caused by the difference of volume expansion in the case and the core, and the influence of both the reduction of retained austenite and the strain due to shot peening are considered. The evaluated residual stress is close to the measured stress, though the surface stress is rather overestimated. The stress intensity factor is computed by the influence function method, and it is shown that the factor is decreased by the residual stress in shot peened gear tooth. The shot peening is fairly effective to the reduction of fatigue crack growth rate. The crack propagation is simulated and the resistance due to shot peening is quantitatively demonstrated and discussed.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.146-153
• /
• 2004

We compared the fatigue characteristics of weld metal with those of base metal, and not heat-treated with heat-treated. Also, we examined the influence of bead in a viewpoint of fatigue life. From the experimental results, it has been seen that the fatigue characteristics of welded specimens grinded the toe of bead are slightly better than not grinded. We have seen that the fatigue life is affected more by the stress concentration on the profile change in the weld toe rather than by residual stress influence, because heat-treated or not had almost no influence on the fatigue characteristics.

• Journal of Korean Clinical Nursing Research
• /
• v.22 no.2
• /
• pp.109-117
• /
• 2016

Purpose: The purpose of this study was to identify the influence of nursing practice environment, compassion fatigue and compassion satisfaction on burnout among clinical nurses in Korea. Methods: A descriptive crosssectional study was conducted. The sample consisted of 210 clinical nurses from three tertiary hospitals located in Seoul. Measurement instruments included the Korean version of the Practice Environment Scale of Nursing Work Index (K-PES-NWI) and Stamm's professional quality of life (ProQOL). Descriptive statistics, t-test, ANOVA, correlation analysis, and multiple regression were used to analyze the data. Results: Nursing practice environment had moderate negative influence on burnout (r=-.38, p<.001). Compassion fatigue had strong positive influence on burnout (r=.50, p<.001), while compassion satisfaction had strong negative influence on burnout (r=-.61, p<.001). The regression model explained 63% of variance of burnout and the compassion satisfaction was the most influencing factor for nurses' burnout. Conclusion: This study identified nursing practice environment, compassion fatigue and compassion satisfaction as influencing factors for nurses' burnout. Strategies to decrease compassion fatigue, enhance compassion satisfaction and create better nursing practice environment are recommended to decrease nurses' burnout.

• Journal of Welding and Joining
• /
• v.22 no.4
• /
• pp.73-81
• /
• 2004

Failure mechanisms of welded joints under fatigue loads are interpreted that multiple collinear surface cracks initiating randomly along the weld toes propagate under the mutual interaction and coalescence of adjacent two cracks. To estimate fatigue crack propagation life for three types of the representative welded joints, i.e. non-load carrying cruciform, cover plate and longitudinal stiffener joint, the stress intensity factors at the front of the surface cracks have to be calculated, which are influenced strongly by the geometry of attachments, weld toes and the crack shapes. For the effective calculation of the stress intensity factors the Mk-factor was introduced which can be derived by a parametric study performed by FEM considering influence of the geometrical effects. The fatigue life of the cruciform joint was estimated by using the Mk-factors and the method considering the propagation mechanisms of the multiple surface cracks. Analysis results for the fatigue life had a good agreement with that of experiment.

• Journal of Welding and Joining
• /
• v.7 no.1
• /
• pp.28-35
• /
• 1989

The fatigue crack growth behavior in GTA butt welded joints of Al-Alloy 5052-H38 was examined using Single Edge Notched(SEN) specimens. It is well known that welding residual stress has marked influence on fatigue crack growth rate in welded structure. In the general area of fatigue crack growth in the presence of residual stress, it is noted that the correction of stress intensity factor (K) to account for residual stress is important for the determination of both stress intensity factor range(.DELTA.K) and stress ratio(R) during a loading cycle. The crack growth rate(da/dN) in welded joints were correlated with the effective stress intensity factor range(.DELTA.Keff) which was estimated by superposition of the respective stress intensity factors for the residual stress field and for the applied stress. However, redistribution of residual stress occurs during crack growth and its effect is not negligible. In this study, fatigue crack growth characteristics of the welded joints were examined by using superposition of redistributed residual stress and discussed in comparison with the results of the initial welding residual stress superposition.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2007

In this study, the influence of compressive residual stress and corrosive condition for corrosion fatigue crack was investigated, after immersing in 3.5%NaCl, $10%HNO_3+3%HF,\;6%FeCl_3$. The immersion period was performed for 90days. The fatigue characterization of a spring steel with processed shot peening were performed by considering the several corrosion environments in the range of stress ratio of 0.05 by means of opening mode displacement. By using the methods mentioned above, the following conclusions have been drawn: The fatigue life shows more improvement in the shot peened material than that in the un peened material. And the fatigue life shows improvement in ambient than in corrosion conditions. Threshold stress intensity factor range of the shot peened materials has higher than of the un peened materials. And the threshold stress intensity factor range was decreased in corrosion environments over ambient.

• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.329-336
• /
• 2001

In this study, a series of fatigue tests are carried out in order to estimate quantitatively the characteristics of fatigue crack growth rate for high strength steels of SM570, POSTEN60, and POSTEN80 steel, that is, the influence on fatigue crack growth rate according to the welding line, the characteristics of fatigue crack growth according to the welding method and the kinds of steel, and the characteristics of fatigue crack growth for base metal, heat affected zone and weld metal. From the test results, in case that the notch if parallel to welding line, it knows that the retardations of fatigue crack growth rate in crack tip at early stage increase remarkably than in case that the notch is perpendicular to welding line due to compressive residual stress. And the characteristics of fatigue crack growth rate according to welding method are that the dispersion of fatigue crack growth rate in case of FCAW method is smaller than that of SAW method. Also, it knows that the fatigue crack growth rate converges in high stress intensity factor range.

• Journal of Korean Academy of Nursing
• /
• v.36 no.7
• /
• pp.1224-1231
• /
• 2006

Purpose: This study was conducted to identify comprehensive predictors of fatigue in cancer patients. Methods: One hundred ten cancer patients visiting in-patient or out-patient clinics of a university hospital located in Incheon participated in this study. Results: The hematologic indicators (WBC and Hemoglobin) were significant fo. explaining fatigue. The psychological factors of fatigue were statistically significant. Both anxiety and depression, included as psychological factors, were significant in explaining fatigue in cancer patients. The influence of physical factors on fatigue was also statistically significant. Among the variables included as physical factors, pain, nausea/vomiting/anorexia, and sleep disturbance were significant whereas, dyspnea was not significant. The influence of the daily activity factor on fatigue was statistically significant. Among the variables included as daily activity factors, regular exercise or not and the usual activity level were significant in explaining fatigue of cancer patients, while the level of rest was not statistically significant. Conclusions: From the study results fatigue of cancer patients appeared to be influenced by multidimensional factors, such as physiological, physical, psychological, and activity related factors.