• International Journal of Fluid Machinery and Systems
• /
• v.8 no.2
• /
• pp.102-112
• /
• 2015

In the Nordic grid, a trend observed the recent years is the increase in grid frequency variations, which means the frequency is outside the normal range (49.9-50.1 Hz) more often. Variations in the grid frequency leads to changes in the speed of rotation of all the turbines connected to the grid, since the speed of rotation is closely related to the grid frequency for synchronous generators. When the speed of rotation changes, this implies that the net torque acting on the rotating masses are changed, and the material of the turbine runners must withstand these changes in torque. Frequency variations thus leads to torque oscillations in the turbine, which become dynamical loads that the runner must be able to withstand. Several new Francis runners have recently experienced cracks in the runner blades due to fatigue, obviously due to the runner design not taking into account the actual loads on the runner. In this paper, the torque oscillations and dynamic loads due to the variations in grid frequency are simulated in a 1D MATLAB program, and measured grid frequency is used as input to the simulation program. The maximum increase and decrease in the grid frequency over a 440 seconds interval have been investigated, in addition to an extreme event where the frequency decreased far below the normal range within a few seconds. The dynamic loading originating from grid frequency variations is qualitatively found by a constructed variable $T_{stress}$, and for the simulations presented here the variations in $T_{stress}$ are found to be around 3 % of the mean value, which is a relatively small dynamic load. The important thing to remember is that these dynamic loads come in addition to all other dynamic loads, like rotor-stator interaction and draft tube surges, and should be included in the design process, if not found to be negligible.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.5
• /
• pp.343-359
• /
• 2016

Objective:In this study, we designed working clothes for livestock farmers to wear in spring and autumn to improve their work efficiency, conducted a physiological test on their performance, and evaluated their comfort. Background: In recent years, livestock farming in Korea has expanded, yet farmers' safety and sanitation levels remain low in hazardous environments that include organic dust, toxic gas, and heat stress, as well as the risk of accidents. Furthermore, most livestock farmers wear ordinary or dust-resistant clothes that are unsuitable for rearing livestock and compromise their safety and health. Thus, it is important to design specialized working clothes for livestock farmers that are comfortable and that minimize their health and safety risks. Method: To this end, we examined the literature on livestock (poultry, swine, and cattle) farmers' safety and sanitation issues, designed appropriate working clothes, and tested them in terms of sensory feel, physiological response, and subjective comfort. Results: The respondents expressed satisfaction with the new working clothes. The results of a physiological test showed a decline in temperature and humidity inside the clothes, a lower pulse rate, and a lower oxygen intake compared to the measurements taken when famers wore their previous working clothes. This indicates a fall in heat stress and fatigue, which was mostly consistent with the results of the assessment of subjective comfort. Conclusion: The results of the analysis show an improvement in the comfort of the new working clothes compared to the dust-resistant clothes that are widely worn. Based on this study, the new working clothes need to be further tested and evaluated to improve the design. Application: This study is expected to contribute to designing better working clothes for livestock farmers.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.8
• /
• pp.653-660
• /
• 2015

In this study, we conduct power performance and load analyses of two different types of vertical-axis tidal-current turbines using the computational fluid dynamics (CFD) method. To analyze the power output and loads, we perform transient CFD simulations considering the cavitation model using ANSYS CFX. The averaged power output of an H-type rotor was 7.47 kW and 67.6 kW in normal and extreme operating conditions, respectively, which did not satisfy the initial design conditions. However, in the case of the helical-type rotor, the power output under normal and extreme conditions were close to the expected values. The cavitation, which may cause instantaneous power fluctuation, occurred repeatedly at the suction side of the rotors. In order to guarantee a more stable power supply and to prevent fatigue failure, we require a design that minimizes cavitation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1129-1136
• /
• 2010

Damper springs in a drive-line absorb the impulsive torque generated when a lock-up clutch is connected directly, instead of via a fluid coupling. Design optimization and finite element analysis were performed to improve the shock- and vibration-absorption capacity of the lock-up clutch. For this purpose, a multi-body dynamics model was developed by including the main parts of a vehicle, such as an engine with a clutch, a transmission, drive shafts and wheels, and a whole mass of a vehicle. The spring constants were selected so that resonance of a system could be avoided. Damper springs were optimized on the basis of the spring constants, impulsive torques, compressed angles, spring counts, fatigue constraints, etc. Topology optimization was performed for three plates with the damper springs. The compliance was set up as an objective function, and volume fraction was fixed below 0.3. A new shape for the plates was proposed on the basis of the topology result.

• Fashion & Textile Research Journal
• /
• v.18 no.4
• /
• pp.498-508
• /
• 2016

The purpose of this study is to develop an aesthetic and functional bicycle wear for new senior women in their 50s and 60s. Based on the results of the survey, we developed bicycle wear that is friendly to bicycling posture and reflects the preference of new senior women. The results are as followed: First, emphasis is placed on the simple and functional design of the experimental wear consisting of jacket and pants. Jacket is different from the color scheme with the armhole princess line in order for the waistline to look slim. Pants are designed to hold the leg muscles tightly in order to help reduce the muscle fatigue on the bicycle ride. Second, cutting lines and coloring materials are used for the wearer to look slim and the safety of the wearer is planned to secure by inserting the reflective material along the cutting lines on the bicycle ride. Third, the pattern of the experimental wear is designed in consideration of the riding motion of the bicycle. Jacket is designed to have back length longer than front length as compared to the bicycle wears available on the market. Sewing lines in the armpit are designed to be eliminated in order to move the arms smoothly on the ride. Pants are designed to minimize the seam line in consideration of the movement of muscles and ligaments and the experimental wear is produced by combining the material with the functions of cool comfort and stretch.

• Composites Research
• /
• v.29 no.6
• /
• pp.369-374
• /
• 2016

In this study, a structural optimal design of 10 MW composite blade was performed using bend-twist coupled(BTC) design concept. Bend-twist coupling of blade means the coupling behavior between the bending and torsional deflections due to the composite lamina with fiber angle biased from the blade longitudinal axis. This can potentially improve the overall performance of composite blade and reduce the dynamic loading. Parametric studies on layup angle, thickness and area of off-axis carbon UD were conducted to find the optimum coupling effect with weight reduction. Comparing the results of fatigue load analysis between conventional model and BTC applied model, the damage equivalent load(DEL) of blade root area were decreased about 3% in BTC model. To verify the BTC effect experimentally, a 1:29 scaled model was fabricated and the torsion at the tip under deflection behavior of blade stiffener model was measured by static load test.

• Journal of muscle and joint health
• /
• v.17 no.1
• /
• pp.79-88
• /
• 2010

Purpose: The purpose of this study was to analyze the published research in the Journal of Muscle and Joint Health and to suggest the future perspectives. Methods: In this study, we reviewed the contents of 195 articles published in this journal from the first issue of the year 1994 to 2007. Results: The majority of subjects were adult, mostly with arthritis. The position of the authors was mostly professor (73.3%). Most of studies did not clearly describe about ethical consideration. The data collection was mostly conducted in the hospital (53.8%) or community (36.9%), with the questionnaire (62.6%). The types of research design were correlational study (36.4%), experimental study (31.8%), survey (18.5%), and qualitative research (4.6%). Physical variables included pain, fatigue, activities of daily living, joint flexibility, muscle strength, etc., psychosocial variables were measured by self-efficacy, depression, quality of life, etc., and cognitive variables by knowledge, education, etc. The most utilized nursing intervention for experimental study were exercise, self-help, and education. Conclusion: Further research is needed to extend the target population research design from multidisciplinary perspectives.

• Archives of Plastic Surgery
• /
• v.45 no.4
• /
• pp.340-344
• /
• 2018

Background In performing extended latissimus dorsi (ELD) flap procedures, a skin paddle design on the bra line helps reduce visible scarring. This improves the patient's satisfaction with the outcome. However, such a design leads to a longer operation time and increased fatigue of the surgeon due to the narrow operative field. In this study, the authors propose a method that elongates the axillary incision line posteriorly by 1.5 cm from the lateral border of the latissimus dorsi muscle. We examined whether this method could shorten the operation time and compared the incidence of complications between patients who underwent this novel procedure and patients who underwent the traditional procedure. Methods In this study of patients who underwent ELD flap procedures for immediate breast reconstruction, 89 underwent surgery with the elongated axillary incision and 45 underwent surgery without the elongated incision. The total operation time and complications were retrospectively examined based on the patients' medical records, and we examined whether there was any statistically significant difference in the total operation time. Results In the experimental group with the elongated axillary incision, the operation time ranged from 125 to 255 minutes (median, 175 minutes). In contrast, in the control group without the elongated axillary incision, the operation time ranged from 142 and 340 minutes (median, 205 minutes). The operation time was statistically significantly different between the two groups, and no significant complications were observed in the experimental group. Conclusions Elongation of the axillary incision alone may shorten the operation time of the ELD flap procedure without causing additional complications.

• Women's Health Nursing
• /
• v.8 no.2
• /
• pp.212-221
• /
• 2002

The purpose of this study was to identify the effect of foot reflexology on premenstrual syndrome and dysmenorrhea in female college students. The research design of this study was a quasi-experimental design. Of the forty female college students, twenty were assigned to the experimental group and, twenty to the control group. The data were obtained over 2 months(November 26, 2001 to January 31, 2002) from a nursing of C college located in S city. The instrument used to assess premenstrual syndrome and dysmenorrhea was Keele's VAS(Visual Analogue Scale) and opening records. Subjects in the experimental group received foot reflexology for 6 times with 1 hours during 60 days, and subjects assigned to the control group did not receive foot reflexology. Data were analysed with percentage, mean, standard deviation, $x^2$-test, unpaired t-test, and repeated measure ANOVA, using SAS Program. The results of the study are as follow, 1.The symptoms which the group of experimental and the group of control discomforts the most are sensitiveness(35%), abdominal pain (30%),lower abdominal pain (30%) and lumbago (20%). The method of relieve premenstrual syndrome and dysmenorrhea by which the subjects employ the most to solve their premenstrual syndrome and dysmenorrhea is the getting along by enduring(67.5%) and bed rest (32.5%). 2.The mean score of the premenstrual syndromes and dysmenorrhea before foot reflexology was 8.35, it was 4.16 at the first menstruation after foot reflexology and 3.25 at the second menstruation for the experimental group. 3.The relieved symptoms after foot reflexology was fatigue(50%), insomnia(40%), abdominal pain(35%), lower abdominal pain (30%) and constipation(30%). Foot reflexology was effective in improve the symptoms of the female college students who have the premenstrual syndrome and dysmenorrhea.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1547-1552
• /
• 2008

The tip of these catheter with straight needles is not able to reach in the vicinity of the disc bulging, which are the cause of the low back pain and because the far indirect radio-frequency treatment results in the decompression, the nucleoplasty has the limit. Many incurable diseases has not been solved due to the unexistence of the advanced technique for the MIS human body catheter device. To increase the possibility of nucleoplasty, the needle tip should be located at the closest area of the lesion. For this reason, the best way to increase the success rate of the operation is that the needle tip should access 3-dimensionally to the operating field as soon as possible. To achieve this aim, our studies are restricted as follows: 1) the SMA catheter design to control the 3-dimensional direction, 2) the security of the immediate response by the positive control of the SMA element thermal distribution using Peltier thermoelectric elements, 3) the aquisition of the control data by monitoring the relationship between the temperature of SMA element and the displacement, and 4) the design of the controller to guarantee the accurate location.